0% found this document useful (0 votes)
727 views4 pages

Komatsu CD60R-1A Crawler Carrier Specs

The document provides specifications for the CD60R-1A crawler carrier made by Komatsu. It has a 133 horsepower engine and can carry a 13,230 pound payload. Key features include 360 degree rotation capability allowing the operator to always face forward, ideal for low ground pressure applications, and utilizing field-proven Komatsu hydraulic excavator components for performance and reliability. It provides specifications on the engine, transmission, hydraulics, undercarriage, and operating performance.

Uploaded by

Jan Hendriks
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
727 views4 pages

Komatsu CD60R-1A Crawler Carrier Specs

The document provides specifications for the CD60R-1A crawler carrier made by Komatsu. It has a 133 horsepower engine and can carry a 13,230 pound payload. Key features include 360 degree rotation capability allowing the operator to always face forward, ideal for low ground pressure applications, and utilizing field-proven Komatsu hydraulic excavator components for performance and reliability. It provides specifications on the engine, transmission, hydraulics, undercarriage, and operating performance.

Uploaded by

Jan Hendriks
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Machine Shown with

Optional Equipment

CD60R-1A
CRAWLER CARRIER
Flywheel Horsepower: 133 hp/99.3 kW
Payload: 13,230 lbs. 6000 kg
Operating Weight
w/o Payload: 18,740 lbs. 8500 kg

FEATURING
• 360° Rotation Capability
allows operator to face forward under any conditions
• Ideal For Low Ground Pressure Applications
• Incorporates Field–Proven Komatsu
Hydraulic Excavator Components
CD60R-1A Crawler Carrier
A Full 360 Degree Rotation Capability; Forward-Facing
World Class Komatsu Quality Operator Position Under Any Conditions: No Space
35 years of experience and technology is Required for U-Turns
manufactured into every crawler carrier. The ability of the cab and dump body integrated upperstructure to rotate
Komatsu’s ISO certification and critical quality 360 degrees enables dumping at any angle, while minimizing site-damage.
control ensure that every crawler carrier will This ability also results in minimal wear of pads, due to reduced steering
satisfy the most demanding customer. From necessity. The full rotation capability also means the operator can always
design to production, from sales to service, execute jobs in a forward-facing position, leading to dramatically enhanced
Komatsu means total quality. speed of operation, without sacrificing comfort.

Field-Proven Hydraulic Components


The CD60R incorporates the most advanced hydraulic components in the
market today by utilizing field-proven Komatsu hydraulic excavator
technology. Rotation and control functions offer excellent performance
Advanced Cab Features with unmatched reliability.
The CD60R offers all the
conveniences an operator could
want. Superior ventilation
combined with excellent seating
position and well placed low effort Easy Dumping by Foot
controls make work easy on any Pedal Operation
job site. Hand levers and joysticks are
used to control forward/reverse
direction and the rotation of the
upperstructure. Dumping is
controlled by foot pedal allowing
effective, well-balanced use of
both hands and feet.

High/Low Automatic Transmission


In cases where the load increases during Automatic Parking Brake
high-speed travel, the transmission will
When the CD60R comes to a stop, the parking
automatically shift down to low-speed range,
brake will be automatically activated. When in
providing optimum driving force.
operation, the parking brake will automatically
disengage.
Specifications CD60R-1A Crawler Carrier
Engine-EPA Certified Brakes
Model . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu S6D102E1A Travel
Flywheel Horsepower . . . . . . . . .133 HP/99.3 kW@2000 rpm Service Brake . . . . . . . . . . . . .Dynamic with hydraulic lock
Displacement . . . . . . . . . . . . . . . . . . . . . . .359 cu. in. 5.9 ltr. Parking Brake . . . . . . . . . . . . . . .Wet, sealed, multiple disc
Max Torque . . . . . . . . . . . . . .412 ft. lb. 559 Nm@1,350 rpm (Parking brake engages automatically when machine is stopped)
No. of Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Swing
Bore/Stroke . . . . . . . . . . . . . . . .4.01"x 4.72" 102/120 mm Service Brake . . . . . . . . . . . . . . . . . . . . . . . .Hydraulic lock
Fuel Injection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Direct Holding Brake . . . . . . . . . . . . . . . Wet, sealed, multiple disc
Cooling System . . .Thermostatically controlled, liquid cooling
Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 volt
Batteries . . . . . . . . . . . . . . . . . . . . . . .2 x 12 volt, 110 Ah Operating Performance
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35A Max. Payload . . . . . . . . . . . . . . . . . . . . . .13,230 lb 6000kg
Air Filter . . . . . . . . . . .dry type, dual element with automatic Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30°
dust evacuator Max. Dumping Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58°
Transmission Dump Body, Dump Speed . . . . . . . . . . . . . . . . . . . . . .8.1 sec.
Dump Clearance . . . . . . . . . . . . . . . . . . . . . . . .3'1" 930 mm
Two speed hydrostatic transmission with differential planetary
Upper Structure Swing Radius . . . . . . . . . . .8'10" 2,695 mm
reduction
Upper Structure Swing Speed . . . . . . . . . . . . . . . . . . . .4 rpm
Gears
Forward/Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2/2
Speeds . . . . . . . . . . . . . . . . 1st gear 0 – 3.7 mph 6.0 km/h Hydraulic System
2nd gear 0 – 5.3 mph 8.5 km/h System . . . . . . . . . .Variable Displacement Axial Piston Pump
Hydraulic Pressure . . . . . . . . . . . . . . . . .2490 psi 175 kg/cm2
Undercarriage
Bogie type with rubber track for excellent ride and flotation. Operating Weight
Track tension is easily adjusted with grease gun. Net Weight–Unloaded . . . . . . . . . . . . . . .18,740 lb 8500kg
Suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bogie Type Gross Weight–Loaded . . . . . . . . . . . . . . .32,150 lb 14,580kg
Track Frame . . . . . . . .Box–section, high tensile strength steel
construction
Number of Carrier Rollers . . . . . . . . . . . . . . . . . .4, each side Service Refill Capacities
Number of Track Rollers . . . . . . . . . . . . . . . . . . .8, each side Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . .34.3 US gal. 130 ltr.
Track Shoes . . . . .Steel reinforced rubber track, mono–block, Coolant System . . . . . . . . . . . . . . . . . . . .5.3 US gal. 20 ltr.
rubber shoe Engine Oil . . . . . . . . . . . . . . . . . . . . . . . .5.0 US gal. 19 ltr.
Track Shoe Width . . . . . . . . . . . . . . . . . . . . .24.0" 600mm Hydraulic System . . . . . . . . . . . . . . . . . .11.9 US gal. 45 ltr.
Ground Pressure–Unloaded . . . . . . . . . . . . .3.1 psi .22kg/cm2 Final Drive, Each Side . . . . . . . . . . . . . . .0.6 US gal. 2.1 ltr.

Standard equipment
• Adjustable operator’s seat • Horn • Swing lock switch w/indicator light
• Alternator condition indicator light • Hourmeter • Tachometer
• Decelerator pedal • Hydrostatic charge pressure indicator light • Tool Box
• Dump body control lever • Operator controls lock lever • Travel alarm
• Dump body without tailgate • Parking brake • Travel speed selector switch
• Engine coolant temperature gauge • Rear view mirrors (2) • Two independent track control
• Engine oil pressure indicator light • Reverse travel indicator light travel levers
• Engine pre-heat w/indicator light • ROP/FOPS canopy • Upper structure centering indicator light
• Front driving lights (2) • Seat belt, 3”
• Fuel gauge • Swing control lever w/indicator light

Optional equipment
• Enclosed cab w/front & side • Heater & Defroster • Windshield wiper & washer
opening glass
CD60R-1A Crawler Carrier

Dimensions
Overall Length . . . . . . . . . . . . . . . . . . 15'10'' 4825 mm Dump Body Height . . . . . . . . . . . . . . . . . 4'9'' 1455 mm
Overall Width . . . . . . . . . . . . . . . . . . . . . 8'8'' 2640 mm Dump Body Length (inside). . . . . . . . . . 8'11'' 2725 mm
Overall Height. . . . . . . . . . . . . . . . . . . . . 9'1'' 2775 mm Dump Body Width (inside) . . . . . . . . . . 6'11'' 2095 mm
Length of Track on Ground . . . . . . . . . . 10'6'' 3190 mm Dump Body Height (inside). . . . . . . . . . . 1'4'' 400 mm
Track Gauge . . . . . . . . . . . . . . . . . . . . . 5'10'' 1790 mm Loading Height . . . . . . . . . . . . . . . . . . . . 6'1'' 1855 mm
Min. Ground Clearance . . . . . . . . . . . . . . 1'8'' 500 mm Dump Clearance . . . . . . . . . . . . . . . . . . . 3'1'' 930 mm

measurements=ft' in" (mm)

This specification sheet may contain attachments and optional equipment that are not available in your area. Please contact your local
Komatsu Utility Corporation distributor for those items you may require. Materials and specifications are subject to change without notice.

PO Box 8112 • Vernon Hills, IL 60061-8112


website: [Link]

Form No.KUSS117-00 Printed in USA 0200

You might also like