0% found this document useful (0 votes)
75 views8 pages

Lab8-1 R3

The document shows the output of the show run command on a router. It displays the running configuration of the router, including interface configurations, routing protocols configured like OSPF and RIP, and other settings.

Uploaded by

Carlos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
75 views8 pages

Lab8-1 R3

The document shows the output of the show run command on a router. It displays the running configuration of the router, including interface configurations, routing protocols configured like OSPF and RIP, and other settings.

Uploaded by

Carlos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd

show ru#

R3#show ru
% Ambiguous command: "show ru"
R3#show run
Building configuration...

Current configuration : 2234 bytes


!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R3
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
clock timezone EST -5
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip source-route
!
!
--More-- ######### #########!
!
ip cef
ipv6 unicast-routing
no ipv6 traffic interface-statistics
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
redundancy
!
!
!
!
!
--More-- ######### #########!
!
!
!
interface Loopback0
ip address [Link] [Link]
ipv6 address FEC0::3:1/112
ipv6 ospf 1 area 0
!
interface Ethernet0/0
no ip address
ipv6 address [Link]/64 eui-64
ipv6 ospf 1 area 0
!
interface Ethernet0/1
no ip address
shutdown
!
interface Ethernet0/2
no ip address
shutdown
!
interface Ethernet0/3
--More-- ######### ######### no ip address
shutdown
!
interface Ethernet1/0
no ip address
shutdown
!
interface Ethernet1/1
no ip address
shutdown
!
interface Ethernet1/2
no ip address
shutdown
!
interface Ethernet1/3
no ip address
shutdown
!
interface Ethernet2/0
no ip address
shutdown
!
--More-- ######### #########interface Ethernet2/1
no ip address
shutdown
!
interface Ethernet2/2
no ip address
shutdown
!
interface Ethernet2/3
no ip address
shutdown
!
interface Ethernet3/0
no ip address
shutdown
!
interface Ethernet3/1
no ip address
shutdown
!
interface Ethernet3/2
no ip address
shutdown
--More-- ######### #########!
interface Ethernet3/3
no ip address
shutdown
!
interface Ethernet4/0
no ip address
shutdown
!
interface Ethernet4/1
no ip address
shutdown
!
interface Ethernet4/2
no ip address
shutdown
!
interface Ethernet4/3
no ip address
shutdown
!
interface Serial5/0
no ip address
--More-- ######### ######### shutdown
no fair-queue
serial restart-delay 0
!
interface Serial5/1
bandwidth 64
no ip address
ipv6 address FEC0::13:3/112
ipv6 ospf 1 area 0
serial restart-delay 0
clock rate 64000
!
interface Serial5/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial5/3
no ip address
shutdown
serial restart-delay 0
!
ip forward-protocol nd
--More-- ######### #########!
!
no ip http server
no ip http secure-server
!
ipv6 router ospf 1
log-adjacency-changes
!
!
!
!
!
!
!
control-plane
!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
!
--More-- ######### #########exception data-corruption buffer truncate
end

R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#show run
Building configuration...

Current configuration : 2366 bytes


!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R3
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
clock timezone EST -5
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip source-route
!
!
--More-- ######### #########!
!
ip cef
ipv6 unicast-routing
no ipv6 traffic interface-statistics
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
redundancy
!
!
!
!
!
--More-- ######### #########!
!
!
!
interface Loopback0
ip address [Link] [Link]
ipv6 address FEC0::3:1/112
ipv6 enable
ipv6 rip cisco enable
ipv6 ospf 1 area 0
!
interface Ethernet0/0
no ip address
ipv6 address [Link]/64 eui-64
ipv6 enable
ipv6 rip cisco enable
ipv6 ospf 1 area 0
!
interface Ethernet0/1
no ip address
shutdown
!
interface Ethernet0/2
--More-- ######### ######### no ip address
shutdown
!
interface Ethernet0/3
no ip address
shutdown
!
interface Ethernet1/0
no ip address
shutdown
!
interface Ethernet1/1
no ip address
shutdown
!
interface Ethernet1/2
no ip address
shutdown
!
interface Ethernet1/3
no ip address
shutdown
!
--More-- ######### #########interface Ethernet2/0
no ip address
shutdown
!
interface Ethernet2/1
no ip address
shutdown
!
interface Ethernet2/2
no ip address
shutdown
!
interface Ethernet2/3
no ip address
shutdown
!
interface Ethernet3/0
no ip address
shutdown
!
interface Ethernet3/1
no ip address
shutdown
--More-- ######### #########!
interface Ethernet3/2
no ip address
shutdown
!
interface Ethernet3/3
no ip address
shutdown
!
interface Ethernet4/0
no ip address
shutdown
!
interface Ethernet4/1
no ip address
shutdown
!
interface Ethernet4/2
no ip address
shutdown
!
interface Ethernet4/3
no ip address
--More-- ######### ######### shutdown
!
interface Serial5/0
no ip address
shutdown
no fair-queue
serial restart-delay 0
!
interface Serial5/1
bandwidth 64
no ip address
ipv6 address FEC0::13:3/112
ipv6 enable
ipv6 rip cisco enable
ipv6 ospf 1 area 0
serial restart-delay 0
clock rate 64000
!
interface Serial5/2
no ip address
shutdown
serial restart-delay 0
!
--More-- ######### #########interface Serial5/3
no ip address
shutdown
serial restart-delay 0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
ipv6 router ospf 1
log-adjacency-changes
!
ipv6 router rip cisco
!
!
!
!
!
!
!
control-plane
--More-- ######### #########!
!
line con 0
logging synchronous
line aux 0
line vty 0 4
login
!
exception data-corruption buffer truncate
end
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#
R3#

You might also like