Scribd
Upload
4K views1 page

175 320300

This document outlines inspection and testing requirements for positive material identification (PMI) according to Saudi Aramco specifications. It requires 100% PMI testing for pressure components and welds made of alloy materials. Tests must identify alloying elements and be performed using methods suitable for the material according to SAES-A-206. Detailed records and procedures are required, and final PMI reports must be reviewed by Saudi Aramco inspectors before acceptance.

Uploaded by

sridhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views1 page

175 320300

This document outlines inspection and testing requirements for positive material identification (PMI) according to Saudi Aramco specifications. It requires 100% PMI testing for pressure components and welds made of alloy materials. Tests must identify alloying elements and be performed using methods suitable for the material according to SAES-A-206. Detailed records and procedures are required, and final PMI reports must be reviewed by Saudi Aramco inspectors before acceptance.

Uploaded by

sridhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Inspection and Testing Requirements Overview

INSPECTION & TESTING REQUIREMENTS REVISION: 01/29/2013 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 10/01/1999 IR320300 1 of 1


SCOPE: POSITIVE MATERIAL IDENTIFICATION (PMI): For pressure-retaining alloy material components, flange bolting, welds, weld overlays
and cladding or equipment where specified in the SAMSS or Purchase Order.

TEST AND INSPECTION PER: SAES-A-206, and Specifications As Noted Below.

(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)


(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0010
0010
*** X
Pre-Fabrication/Production Requirements
PMI Procedure
Specification Details / Notes:
Shall be made available to Saudi Aramco Inspector for review,
acceptance, and verification of implementation.

0020
0010
***
X
In process inspection & test requirement
Percentage of verification
Specification Details / Notes:
100 % shall be performed on all pressure components and
welds of alloy materials. See SAES A-206 for exceptions.

0020 X Required Number of PMI Tests As detailed in SAES-A-206.

0030 X Basic Alloy Materials to be Verified Elements shall be in accordance with Table 1 of SAES-A-206.

0040 X Methods Shall be suitable for identifying the material of the major alloying
elements required in the applicable material specification or
WPS. See SAES A-206 for acceptable methods.

0050 X Calibration of the Instrument Used Representative sample of the alloy material to be used.

0060 X Acceptance Criteria As per SAES-A-206.

0070 X Rejection Procedures Shall be in place to ensure that rejected components are
segregated and properly identified to prevent reuse. See SAES
for details.

0080 X X Records for Shop Fabrication Per SAES A-206. Detailed recording / logging procedure shall
be prepared by the Equipment Manufacturer or Shop
Fabricator.

0090 X X Records for Field Fabrication Per SAES A-206. SA Inspector to review the proposed testing,
logging, identification, and final installation procedures for all
components requiring PMI testing onsite.

0030
0100
*** X
Final inspection & test requirements
Final PMI Report
Specification Details / Notes:
Shall be reviewed by the Saudi Aramco Inspector prior to final
acceptance.

0110 X Marking and Color Coding As per SAES-A-206

Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
(2) See form SA175-000003 for instructions on using this form.

End of IR320300

INSPECTION & TESTING REQUIREMENTS SAUDI ARAMCO FORM-175 REVISION: 01/29/2013 REPLACES: 10/01/1999 CODE NUMBER: IR320300

You might also like