No: DET ESWB-10-2-2
Authorised By: Manager ESWB
Title: Plant and Equipment Risk Management Form
Issue Date: April 2011
Last Reviewed: August 2015
Page Number: 1 of 8
CENTRAL OFFICE USE ONLY
Next Review Date: August 2017
1. Hazard Management Details General
Plant/Equipment Item: AIR COMPRESSOR (Mobile)
Make/Model No.:
School / Work Location:
Region:
Serial No.:
Date Conducted:
Name of Person(s) Conducting Activity:
Description of Use:
Summary of Key Risks:
(refer to appropriate subsections)
An air compressor takes in air at atmospheric
pressure and compresses it to a higher
pressure.
Common uses for air compressors is to supply
high-pressure air for conveying, paint
spraying, inflating tyres, cleaning, pneumatic
tools etc.
2. Documentation
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Impact and cutting
Pressurised content
Electricity
Ergonomics
Noise
Slips/trips/falls
No: DET ESWB-10-2-2
Authorised By: Manager ESWB
Title: Plant and Equipment Risk Management Form
Issue Date: April 2011
Page Number: 2 of 8
CENTRAL OFFICE USE ONLY
Last Reviewed: August 2015
Next Review Date: August 2017
Relevant Legislation/Standards
Is plant required to be registered?
Y/N
N
Is a user license required?
Key reference material?
Comments
AS 4343Pressure equipment - Hazard levels
AS/NZS 3760 In service safety inspection and testing of electrical equipment
Plant Documentation
Are operators manuals accessible?
Y/N
N
Comments
Is this a restricted use item?
Does this item require safe use documents/test?
3. Hazard Identification
Hazards Inspected
ENTANGLEMENT
Can anyones hair, clothing, gloves, cleaning brushes,
tools, rags or other materials become entangled with
moving parts of the plant or materials?
Risk Assessment
Cons
Like
Risk
Level
Description of Risk
Control Measures
Risk Assessment
Cons
Like
Risk
Level
Description of Risk
Control Measures
Hazards Inspected
IMPACT AND CUTTING INJURIES
Can anyone be crushed/cut/struck etc. due to:
Strike with uncontrolled hose or
coupling.
Material falling off the plant?
Uncontrolled/unexpected movement of plant/load?
Moderate
Possible
Medium
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Ensure air compressor is operated
and maintained in accordance with
manufacturers instructions.
No: DET ESWB-10-2-2
Authorised By: Manager ESWB
Title: Plant and Equipment Risk Management Form
Issue Date: April 2011
Page Number: 3 of 8
CENTRAL OFFICE USE ONLY
Last Reviewed: August 2015
Next Review Date: August 2017
Hazards Inspected
Lack of capacity to slow, stop or immobilise plant?
The plant tipping or rolling over?
Parts of the plant disintegrating or collapsing?
Contact with moving parts during testing,
inspection, operation, maintenance, cleaning or
repair?
Being thrown off or under the plant?
Risk Assessment
Contact with sharp or flying objects? (e.g. work
pieces being ejected)
The mobility of the plant?
Inappropriate parts and accessories being used?
Other
Hazards Inspected
SHEARING
Can anyones body parts be sheared between two
parts of plant, or between a part of the plant and a work
piece or structure?
PRESSURISED CONTENT
Can anyone come into contact with fluids or gases
under high pressure, due to plant failure or misuse of
the plant?
ELECTRICITY
Can anyone be injured or burnt due to:
Moderate
Possible
Description of Risk
Control Measures
N
Moderate
Control Measures
Medium
Risk Assessment
Cons
Like
Risk
Level
Y
Description of Risk
Possible
Medium
Damaged hoses and
accessories may cause blow
out.
Ensure air compressor is operated
and maintained in accordance with
the manufacturers instructions.
Damaged or frayed electrical
cords pose an electrical hazard.
Operator to check for damaged
electrical cords prior to use.
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
No: DET ESWB-10-2-2
Authorised By: Manager ESWB
Title: Plant and Equipment Risk Management Form
Issue Date: April 2011
Page Number: 4 of 8
CENTRAL OFFICE USE ONLY
Last Reviewed: August 2015
Next Review Date: August 2017
Hazards Inspected
Live electrical conductors? (e.g. exposed wires)
Working in close proximity to electrical conductors?
Access to electricity?
Damaged or poorly maintained electrical leads,
cables or switches?
Water near electrical equipment?
Lack of isolation procedures?
Other
Risk Assessment
Y
Hazards Inspected
Poorly designed workstation?
Major
Unlikely
Medium
Risk Assessment
Cons
Like
Risk
Level
Repetitive body movement?
Constrained body posture or the need for
excessive effort?
Design deficiency causing psychological stress?
Control Measures
Ensure equipment is serviced on a
regular basis, tested and tagged,
and appropriate isolation
procedures (e.g. lock out tags) are
in place.
ERGONOMICS
Can anyone be injured due to:
Description of Risk
Description of Risk
Moving or handling the air
compressor may present a
manual handling risk.
Moderate
Unlikely
Medium
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Control Measures
Ensure appropriate manual
handling techniques are applied
when moving or handling the air
compressor.
No: DET ESWB-10-2-2
Authorised By: Manager ESWB
Title: Plant and Equipment Risk Management Form
Issue Date: April 2011
Page Number: 5 of 8
CENTRAL OFFICE USE ONLY
Last Reviewed: August 2015
Next Review Date: August 2017
Hazards Inspected
Inadequate or poorly placed lighting?
Does the plant impact on the surrounding
workplace and create potential hazards? (Consider
safe access and egress from plant, workflow and
design of the workplace)
Is the location of the plant inappropriate? (Consider
potential effects due to environmental conditions
and terrain)
Other
Hazards Inspected
RADIATION
Can anyone using the plant, or in the vicinity of the
plant suffer injury or illness due to exposure to radiation
in the form of any of the following:
infra-red radiation
ultra violet light
microwaves
NOISE
Can anyone using the plant, or in the vicinity of the
plant, suffer injury due to exposure to noise?
VIBRATION
Can anyone be injured or suffer ill-health from
exposure to vibration?
Risk Assessment
Description of Risk
Control Measures
Risk Assessment
Cons
Like
Risk
Level
Description of Risk
Control Measures
Moderate
Y
Unlikely
Medium
The air compressor may
produce high levels of noise.
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Ensure appropriate hearing
protection is worn if working in
close proximity to the air
compressor.
No: DET ESWB-10-2-2
Authorised By: Manager ESWB
Title: Plant and Equipment Risk Management Form
Issue Date: April 2011
Page Number: 6 of 8
CENTRAL OFFICE USE ONLY
Last Reviewed: August 2015
Next Review Date: August 2017
Hazards Inspected
FRICTION
Can anyone be burnt due to contact with moving parts,
materials or surfaces of the plant?
SUFFOCATION
Can anyone be suffocated due to lack of oxygen, or
atmospheric contamination?
CONDITION
Is a hazard likely due to the age and condition of the
plant? (Consider how hard the machine has been
worked, and whether it is used constantly or rarely).
Can anyone be injured as a result of the plant not
serviced appropriately and/or maintained in line
with manufacturers recommendations?
Hazards Inspected
SLIPS/TRIPS/FALLS
Can anyone using the plant, or in the vicinity of the
plant, slip, trip or fall due to:
Uneven, slippery or steep work surfaces?
Poor housekeeping, e.g. spillage in the vicinity?
Obstacles being placed in the vicinity of the plant?
Inappropriate or poorly maintained floor or walking
surfaces? (i.e. lack of a slip-resistant surface,
unprotected holes, penetrations or gaps?)
Risk Assessment
Description of Risk
Control Measures
Risk Assessment
Cons
Like
Risk
Level
Description of Risk
Control Measures
Poor housekeeping by allowing
the build-up of waste materials
or failure to immediately clean
up spills could result in a slip
hazard.
Minor
Possible
Medium
Minor
Possible
Medium
Inappropriate placement of
objects (e.g. spare materials,
bags etc.) in the immediate
vicinity of the equipment may
result in a trip hazard.
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Ensure appropriate cleaning and
housekeeping practices are
maintained to minimise the risk of a
slip, trip or fall.
No: DET ESWB-10-2-2
Authorised By: Manager ESWB
Title: Plant and Equipment Risk Management Form
Issue Date: April 2011
Page Number: 7 of 8
CENTRAL OFFICE USE ONLY
Last Reviewed: August 2015
Next Review Date: August 2017
Hazards Inspected
If operating or maintaining plant at height can anyone
slip, trip or fall due to:
Use of work platforms, stairs or ladders?
Lack of guardrails or other suitable edge
protection?
Other?
Hazards Inspected
FIRE AND EXPLOSION
Can anyone be injured by fire?
Can anyone be injured by explosion of gases,
vapours, liquids, dusts, or other substances?
TEMPERATURE/MOISTURE
Can anyone come into contact with objects at high or
low temperatures?
Can anyone suffer ill-health due to exposure to
high or low temperatures?
Can anyone be injured or suffer ill-health due to
exposure to moisture?
OTHER
Can anyone be injured or suffer ill-health from
exposure to:
Chemicals?
Toxic gases or vapours?
Risk Assessment
Description of Risk
Control Measures
Risk Assessment
Cons
Like
Risk
Level
Description of Risk
Control Measures
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
No: DET ESWB-10-2-2
Authorised By: Manager ESWB
Title: Plant and Equipment Risk Management Form
Issue Date: April 2011
Page Number: 8 of 8
CENTRAL OFFICE USE ONLY
Last Reviewed: August 2015
Next Review Date: August 2017
Hazards Inspected
Fumes/Dusts?
Other? (please specify)
Risk Assessment
Y
Description of Risk
4. Risk Assessment Signoff
Authorised By:
Signature:
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Date:
Control Measures
