Comfortable control software
for DC sources by ETS
ET System electronic developed their own operating software for its three model series of DC sources
This software simplifies the operation and programming of the devices, extends functionality and
even lowers personnel costs at the same time.
With the primary switched DC sources of the
The software programmed with Lab View is able
series LAB/HP, LAB/SMP and LAB/SMS, ET System
to control devices in the LAB/HP, LAB/SMS and
electronic provides their clients with three
LAB/SMP series via all available interfaces. The
equipment lines featuring high performance
operating software is designed to make possible
with a small footprint designed for use in
the complete remote control of all devices. It
laboratories and test areas.
allows not only the configuration of all operating
modes and settings from the computer, but also
When testing components in power electronics,
the creation of complete checking and testing
verifying circuit breakers or solar inverters, in the
processes on the computer that can be transferred
development of converters or as a battery
to any device around the globe via Internet.
replacement: Everywhere large currents or
voltages are required in industry and electronics
This means users can set all values for currents,
production, users can rely on the high accuracy
voltages or services from any distance and select
and robust quality of DC sources by ET System
the different modes of operation as well.
electronic.
Also, any processes can be generated via the
New software enables convenient remote control
sequence mode of the devices. However, the
The devices with their numerous settings so far
software here offers a much larger range of
were operated with two buttons and a rotary
functions, thus significantly extending the
encoder, but now ET System electronic have
application scope of the devices. For example, it
developed software that functions on a new
is now possible to create complex test sequences
device operating and programming basis.
using conditional queries - such as functions that
are programmed to terminate as soon as a
defined event occurs.
Hauptstrae 119 - 121
D-68804 Altluheim
phone
fax
+49-6205-3948-0
+49-6205-37560
e-mail
web
info@[Link]
[Link]
Comfortable control software
for DC sources by ETS
Logically structured, comfortable to use
The software screen is divided into two basic areas: The upper display and the lower settings field.
Upper figure: A look at the software during a simulation
Fields for the setting values and a screen for the graphical history of the curves are depicted in the display
field. The current curve can be copied with a right click on the display field and transferred to the Clipboard
of your computer; the same applies to the current data, for example, for further analysis in Excel.
Hauptstrae 119 - 121
D-68804 Altluheim
phone
fax
+49-6205-3948-0
+49-6205-37560
e-mail
web
info@[Link]
[Link]
Comfortable control software
for DC sources by ETS
Comprehensive settings options
Sequence tab
The settings field features three tabs for selecting
Use the "Sequence" tab to enter settings for the
the operating mode and various basic settings.
step-by-step processing of commands used by the
software to carry out a specific sequence. In
Users enter their settings values for voltage,
addition to the basic operating mode, here you
current and power into the "Manual" tab. If no
also can specify the desired voltage and current.
device is connected, the software simulates the
behaviour of a LAB unit after pressing the run
These values can be linked to certain conditions
button and then displays the voltage, current
that cause a jump to another location within the
and power history on the screen. A random
programme when the condition has been met.
change of the load resistors also can be adjusted
An unlimited number of conditional jumps can
to simulate the behaviour of the device under
be implemented this way, allowing for the
different loads.
programming of very complex test sequences.
All chosen settings can be saved as presets that
In addition, the set values can be defined both
can be loaded at any time with a simple click of
relatively and absolutely. For example, any output
the mouse. For example, many different electrical
voltage can be increased by an adjustable
test specimens can be tested with specific settings
amount for very easily generated ramps this is
without repeatedly having to re-enter the
also a function that can be realized only with the
corresponding settings values. This means a lot
new operating software.
less work for the user. Personnel costs can be
reduced significantly as well since this also means
"Script" tab
less qualified personnel can load the preset
The script mode is identical to the options
settings and thus carry out test runs.
implemented in the devices; however, the
programming can take place conveniently right
Up to 500 different settings can be stored and
at your desk. The existing script commands can
loaded at any time. In addition to the manual
be combined for longer scripts, which then can
settings, specifications made for simulation and
be sent directly to the device or stored on your
language can be stored as well.
computer for later use.
Hauptstrae 119 - 121
D-68804 Altluheim
phone
fax
+49-6205-3948-0
+49-6205-37560
e-mail
web
info@[Link]
[Link]
Comfortable control software
for DC sources by ETS
Bild oben: The script control allows the programming of complex algorithms
Free demo version available
A functional demo version is available for all interested parties after a short registration in the download
area of ET System electronic.
A paid license key is needed to control an actual device and test the software in real-time usage scenarios.
This license is free for beta testers. Interested parties need to send only a short e-mail to ET System electronic
to receive your free license file. Beta testers are thus not only able to fully test our software, any comments
and suggestions for improvements also will impact the final release.
Hauptstrae 119 - 121
D-68804 Altluheim
phone
fax
+49-6205-3948-0
+49-6205-37560
e-mail
web
info@[Link]
[Link]
