MGE Galaxy 3000
Scalable and ready to grow with your future power demands
10 / 15 / 20 / 30 kVA
>
Performance 3 Phase Power Protection with Adaptability to Meet the Unique Requirements of Small Datacenters and Building Critical Applications > Strong electrical features > Easy to install > Intuitive to use > High availability architectures component
MGE Galaxy 3000 10 / 15 / 20 / 30 KVA
MGE Galaxy 3000 Topology
> 4 Port Communications Interface > Microcontroller Management System > Internal Maintenance Bypass > Power Cable Connections > Bottom Entry Conduit Plate > IGBT Power Factor Corrected Rectifier > IGBT PWM Inverter > Battery Breaker > 4 Color Graphical User Interface > Internal Sealed Low Maintenance Battery Bank > Front Access Slide Out Battery Trays
MGE Galaxy 3000 Parallel
> Up to 4 parallel modules (Parallel for capacity and
redundancy)
> 2 or 3 CB System Bypass Cabinet (60 and 90 kVA) > Up to Two 42 Pole Distribution on SBC
> Remote Alarm Status Panel > Secondary UPS Isolation (up to 4 Breakers) > Field Upgrade Kits (Unitary to Parallel)
Graphical User Interface
Displays include:
> Alarm / event logs > Battery usage history > Animated power flow diagrams > Phase balancing > Operator instructions > Power graphs
MGE Galaxy 3000 features
One-Line Double Conversion Topology
> True isolation between the input and output > Independence of the input and output voltages and frequency > No-break transfer to battery or bypass power > No reliance on batteries for frequency stabilization
Input Power Factor Correction
> THDI < 3%, Power Factor > 0.99 > No special installation precautions > No risk of harmonic problems of existing installations > Total compatibility with an generators, even for low loads > Current consumption reduced by up to 20%, allowing smaller upstream breakers, transformers and cables
Fault Tolerant Circuitry
> 150% rated fast current limiting inverter and fully rated transfer switch > Robust static bypass switch > Inverter fast enough to current limit > Static transfer switch sustained enough current to clear the fault with out damage
Generator Friendly Technology
> Super wide frequency and voltage input range (<25%) > No leading power factor > Ultra low input THD > Smallest UPS to generator ratio in the industry > No reliance on battery power to regulate frequency like Delta Conversion technology
Digital Power Quality (DPQ)
> Variable Switching Frequency > Sub Cycle Control of Output > Error Correction Pulses > Real Time References SineWave > Fast Switching Frequency
Communication
> Automatic shutdown / restart of an unlimited number of servers > View power system status from any point on the WAN > Integration with Enterprise-wide management systems > Pager or E-mail notification of power events > Load shedding for optimized use of backup power > Environmental monitoring and management
Technical characteristics
UPS Rating kVA/KW Input Input Voltage (V) Frequency (Hz) Power Factor Current Distortion (THDI) Input Current ( A @ 208V) Output Voltage (V) Frequency (Hz) Voltage Regulation Voltage Transient Response Voltage Recovery Time Voltage Distortion THD Inverter Overload Bypass Overload Output Current (A @ 208 V) Heat Rejection Environmental Operating Temperature Non-Operating Temperature Relative Humidity Dimensions and Weights Single Module UPS Micro Cabinet Standard Cabinet Auxiliary Cabinet Auxiliary Cabinet (42 Pole Distribution) Battery Cabinet Parallel Module UPS (20/30kVA) System Bypass Cabinet Distribution Cabinet Standards 10/8 15/12 20/16 30/24 208V, 220V, 480V, 600V, 3 Phase, 4 Wire + G (+-15%) (Parallel Module 208V only 60 Hz (+ 8%/ -25%) <0.99 <3% 42 56
28
83
208V (220V, 480V, 600V w/aux cabinet), 3 Phase, 4 Wire + G (Parallel Module 208V only) 60 Hz, +-1% (selectable to 4%), +-0.1% free running +-1.0% for balanced load +-2.5% for 100% unbalanced load +-5% for 100% step load +-1% for loss or return of AC input Within 1% of nominal within 1 cycle <3% L-L and L-N for non-linear loads 120% for 1 min, 145% for 30 sec 10 X nominal current for 1 cycle 28 42 56 83 4821 7232 8895 13342 UPS: 0 to 40C (32F to 104F) Battery: 25C (77F) -20C to +45C (-4F to 113F) 0-95% non-condensing
23.0W X 35.5D X 48.5H (830 lbs max) 32.8W X 40.1D X 62.4H (2,565 lbs max) 18.8W X 40.1D X 62.4H (450 lbs max) 18.8W X 40.1D X 62.4H (180 lbs max) 33.0W X 35.6D X 62.4H (2,723 lbs max) 32.8W X 40.1D X 62.4H (7565 lbs max) 28.8W X 35.64D X 62.33H (300 lbs max) 18.8W X 35.64D X 62.33H (180 lbs max) ISO 9001, UL 1778, cUL, UL924, FCC Part 15, Subpart J, Class A, NEMA PE 1, NEMA 250, NFPA 70, IEC 1000 (801) level 4, OSHA
