Scribd
Upload
9K views1 page

SPLM 2012 License Key Generation Guide

In this document you can see how to install the smart plant licence manger for the istallation of the caesar II for pipe design.

Uploaded by

Saeed Rehman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
9K views1 page

SPLM 2012 License Key Generation Guide

In this document you can see how to install the smart plant licence manger for the istallation of the caesar II for pipe design.

Uploaded by

Saeed Rehman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
  • License Machine Installation Instructions

Install SPLM using 'License Machine' option.

Open Start Menu and Run 'Generate Machine ID' ([Link]) and generate
ID to the text file.
Run [Link] and [Link]
Copy 'Hardware fingerprint' from [Link] to the HWID field of the [Link] and
input 'Name' either. Serial number will be generated.
Copy 'Name' and generated 'Serial' to the [Link]'s fields - 'Name' and 'Key'.
Press OK.
In a few seconds you will see popup window 'Key is valid and has been stored', press OK.
Restart [Link]
Now you will see another window. Copy generated in the first step your 'Machine ID' to
the first field of the keygen.
Press 'Caesar' button and enter number of seats in the 6 fields (for ex. 10) and press
'Done' button, input license expiry day (for ex. 500).
Press 'Generate' button. Your license will be generated in the bottom field. Copy it.
Open Start Menu Start SPLM ([Link]), choose 'Install and remove' option, choose
'Install License Key' option and paste copied license in the field
'License key', press OK.
Open SPLM again from start menu choose option 'Configure and test -> Select License
Machine for Client', enter your PC Name in the field
'License machine', press OK.
Open SPLM again from start menu choose option 'Display -> Show key status' and test
stored keys.
Install CAESAR and run it using serial 00103189401000

You might also like