Scribd
Upload
610 views1 page

ER90S-B9 Welding Wire Specifications

This document provides technical information about Chrome Moly welding wire from Weldwire Company. The alloy is ER90S-B9, intended for MIG and TIG welding processes. It contains 9% chromium and 1% molybdenum. Recommended welding parameters such as voltage, amperage, and gas composition are provided for various wire diameters using MIG and TIG welding processes. Controlled preheat, inter-pass, and post-weld heat treatment is required when using this wire.

Uploaded by

faizalzol
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
610 views1 page

ER90S-B9 Welding Wire Specifications

This document provides technical information about Chrome Moly welding wire from Weldwire Company. The alloy is ER90S-B9, intended for MIG and TIG welding processes. It contains 9% chromium and 1% molybdenum. Recommended welding parameters such as voltage, amperage, and gas composition are provided for various wire diameters using MIG and TIG welding processes. Controlled preheat, inter-pass, and post-weld heat treatment is required when using this wire.

Uploaded by

faizalzol
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

WELDWIRE COMPANY, INC.

Technical Information
Chrome Moly Welding Wire

Alloy: WW90S-B9 Class: ER90S-B9

Conforms to Certification: AWS A5.28 ASME SFA A5.28

Alloy: ER90S-B9 Weld Process: Mig and Tig Welding Processes


AWS Chemical Composition Requirements C = 0.07 - 0.13 Ni = 0.80 max Mn = 1.20 max Cr = 8.00 - 10.50 Si = 0.15 - 0.50 Mo = 0.85 - 1.20 P = 0.010 max Cu = 0.20 max S = 0.010 max V = 0.15 - 0.30 Other = 0.50 max Al = 0.04 max Deposited All Weld Metal Properties % (AW) Tensile Strength Yield Strength Elongation 100,000psi 85,000psi 22%

Deposited Charpy-V-Notch Impact Properties % Not Applicable

Deposited Chemical Composition % (Typical) C = 0.09 P = 0.009 Cr = 8.75 Mn = 1.00 S = 0.009 Mo = 1.08 Si = 0.20 Ni = 0.75 Cu = 0.11 V = 0.19 Application

Deposited Mechanical Properties (S.R.) 1400 F for (2) Hours Tensile Strength Yield Strength Elongation 112,000psi 100,000psi 17%

Material contains 9% chromium and 1% molybdenum. Classification is intended for welding base materials of similar composition. Requires controlled preheat, inter-pass and post-weld heat treatment. Recommended Welding Parameters Process Tig Diameter of Wire .035 inches x 36 .045 inches x 36 1/16 inches x 36 3/32 inches x 36 1/8 inches x 36 .035 inches .045 inches 1/16 inches .035 inches .045 inches Voltage (V) 10 12 10 12 12 15 15 20 15 20 28 32 30 34 30 34 22 25 23 26 Amperage (A) 50 70 70 100 100 - 125 125 - 175 175 - 250 165 200 180 220 230 260 100 140 120 150 Gas 100% Argon 100% Argon 100% Argon 100% Argon 100% Argon 98% Argon + 2% Helium 75% Argon + 25% Co2 100% Co2 100% Co2 75% Argon + 25% Co2

MIG-Sprayer Transfer

MIG-Short Arc Transfer

If additional information is needed Contact Weldwire Company, Inc. 800-523-1266

You might also like