Utility Grid Management

The blackout across Spain and Portugal at the end of April has reminded us just how complex and critical our power infrastructure has become. The most recent ENTSO-E report showcases that in a matter of seconds, a highly interconnected system spanning multiple countries was disrupted – impacting millions of people, from homes and hospitals to trains and digital networks. The exact cause is still being investigated, but one thing is already clear: the way we design, monitor, and stabilize our power grids must evolve with the pace of change in the energy system. We’re seeing an unprecedented combination of rising electricity demand alongside a growing share of renewables with variable output. That’s not a problem in itself. But it does mean we need new answers for system stability. ➡️ Do our protection and control systems react quickly enough to fast-changing conditions? ➡️ Can digital technologies help us predict and prevent such events in the future? ➡️ Are our grids prepared for more dynamic, decentralized load flows? The good news is that solutions exist – from automated controls to grid-enhancing technologies. And when failure does occur, strong interconnections can enable faster restoration. It’s not about blaming a single source or technology. Blackouts have occurred with and without renewables. What matters now is learning the right lessons, investing in grid resilience, and making sure our infrastructure is not only smarter but also more secure!

Energy is once again dominating headlines all over the world. Gas and oil prices are volatile, key shipping routes face geopolitical pressure, and policymakers are concerned about supply risks. The renewed uncertainty is a reminder of an uncomfortable reality: the next energy crisis isn’t an if – it’s a when, and a question of how prepared we are. A defining challenge of this decade, and one that now feels more urgent than ever, is how to build a resilient energy system. One that minimises structural dependencies and is designed for rising electricity demand. The imperative of our time: The more we electrify, the less we import fossil fuels. The less we import, the more resilient we become. The course of action is clear: ▪️ Relentlessly scale renewables: Slowing the buildout will not reduce costs. Quite the opposite – delay compounds system costs for the entire economy. ▪️ Fix the grids: As fast as possible, as efficiently as possible, and at the lowest possible cost. Before they become even more of a bottleneck. ▪️ Secure 24/7 electricity supply: When the wind isn’t blowing and the sun isn’t shining, renewables need reliable backup in the form of battery storage and hydrogen-ready gas fired power plants. But gas should serve only as a backup, with renewables and batteries reducing its utilisation. ▪️ Reduce gas supply dependence with infrastructure and diversification: We must not replace old dependencies with new ones. Diversification of gas supplies is key. And the physical prerequisite is an import infrastructure with buffers. We need the planned LNG terminals, complemented by a nationally held gas reserve to help ensure secure supply in winter. ▪️ Electrify everything that makes sense: The more we can power with mostly homegrown electrons, the less dependent we become on fossil imports. Other energy import-dependent countries like Japan and China have electrification rates that are around 10 percentage points higher than Germany’s. This shows where the path forward lies. Electrification reduces reliance on imported fossil fuels, which in turn strengthens overall resilience. The time to act is now.

🔴 The Spanish power system collapsed within seconds following a double contingency in its interconnection lines with France. First, a 400 kV line disconnected, and less than a second later, a second line also failed, suddenly isolating Spain while it was exporting 5 GW of power. The frequency rose abruptly, triggering the automatic disconnection of approximately 10 GW of renewable generation, programmed to shut down when exceeding 50.2 Hz. This led to a sudden energy shortfall, a sharp frequency drop, and within just nine seconds, a total system blackout. 🪕 The causes of the incident are attributed to low rotational inertia (only about 10 GW of synchronous generation online), identically configured renewable protections that reacted simultaneously, reserves that were inadequate for such a high share of renewables, and an under-dimensioned interconnection with France. Could this have been avoided? Several measures could help prevent similar situations in the future, such as requiring synthetic inertia in large power plants, reinforcing the interconnection with France, and establishing a fast frequency response market, among others. 💡 In this context, Battery Energy Storage Systems (BESS) are more essential than ever. These systems can provide synthetic inertia, ultra-fast frequency response, and backup power in critical situations—capabilities that today’s renewable-dominated system cannot ensure on its own. By reacting in milliseconds, BESS help stabilize the grid during sudden frequency deviations, preventing massive disconnections and buying time for other reserves to activate. Their strategic deployment, combined with appropriate regulation, would make these systems a cornerstone of a more secure and resilient future power system. ... ✋️Please note that this post was written based on the information published on or before its release. Root cause analysis is still ongoing and updates will be released with the outcomes of the investigation. The goal is to show the features that can be provided by BESS within the wide portfolio of solutions applicable in these cases. All inisghts are highly welcome and appreciated in order to enrich our collective understanding. ... 📸 Reid Gardner Battery Energy Storage System (Nevada, USA) A real-world example of how BESS ensures grid stability by delivering synthetic inertia and fast frequency response—essential in a renewable-heavy energy mix.

𝗗𝗲𝗰𝗼𝗱𝗶𝗻𝗴 𝗜𝗻𝗱𝗶𝗮’𝘀 𝟮𝟬𝟯𝟬 𝗘𝗻𝗲𝗿𝗴𝘆 𝗠𝗶𝘅: 𝗜𝘀 𝟱𝟬% 𝗧𝗵𝗲𝗿𝗺𝗮𝗹 𝗣𝗼𝘄𝗲𝗿 𝗘𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗳𝗼𝗿 𝗚𝗿𝗶𝗱 𝗦𝘁𝗮𝗯𝗶𝗹𝗶𝘁𝘆? 🏭 As India accelerates its renewable energy (RE) transition, the 2023 Central Electricity Authority (CEA) "𝗥𝗲𝗽𝗼𝗿𝘁 𝗼𝗻 𝗢𝗽𝘁𝗶𝗺𝗮𝗹 𝗚𝗲𝗻𝗲𝗿𝗮𝘁𝗶𝗼𝗻 𝗠𝗶𝘅 𝟮𝟬𝟯𝟬" highlights a key reality - thermal power remains indispensable for grid stability, even as RE penetration rises. 🔹𝗥𝗲𝗻𝗲𝘄𝗮𝗯𝗹𝗲 𝗚𝗿𝗼𝘄𝘁𝗵 & 𝗖𝗵𝗮𝗹𝗹𝗲𝗻𝗴𝗲𝘀: ✅ By 2029-30, 64.4% of installed capacity (~780 GW) will be non-fossil fuel-based, with solar (292.5 GW) and wind (99.9 GW) as key contributors. ✅ The intermittency of solar and wind creates grid stability challenges, especially during evening peak demand. ✅ RE absorption may drop to 96% on some days due to coal plant flexibility constraints. 🔹𝗧𝗵𝗲𝗿𝗺𝗮𝗹 𝗣𝗼𝘄𝗲𝗿’𝘀 𝗥𝗼𝗹𝗲 𝗶𝗻 𝗘𝗻𝘀𝘂𝗿𝗶𝗻𝗴 𝗦𝘁𝗮𝗯𝗶𝗹𝗶𝘁𝘆:  ✅ Coal-based power will still contribute 55.9% of total electricity generation in 2029-30 (down from 75% in 2022-23). ✅ At least 160 GW of coal capacity must remain operational for over 50% of the year to meet demand when RE output is low. ✅ Thermal plants provide system ramping, balancing sudden fluctuations in RE generation. 🔹𝗖𝗮𝗻 𝗦𝘁𝗼𝗿𝗮𝗴𝗲 𝗦𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝗥𝗲𝗽𝗹𝗮𝗰𝗲 𝗧𝗵𝗲𝗿𝗺𝗮𝗹 𝗣𝗼𝘄𝗲𝗿? ❌ Not entirely. While Battery Energy Storage Systems (BESS) and Pumped Storage Plants (PSP) are being developed, large-scale deployment faces cost & feasibility constraints. ✅ Projected BESS capacity by 2030 ranges between 22.6 GW to 49.3 GW, but its role remains complementary, not a full replacement. 🔹 𝗛𝗼𝘄 𝗠𝘂𝗰𝗵 𝗧𝗵𝗲𝗿𝗺𝗮𝗹 𝗣𝗼𝘄𝗲𝗿 𝗶𝘀 𝗔𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗡𝗲𝗲𝗱𝗲𝗱? ❌ A strict 50% share is not required for grid stability. ✅ The report suggests thermal power should contribute at least 35-40% of total generation to ensure reliability. 🔹 𝗞𝗲𝘆 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀 𝗼𝗳 𝗧𝗵𝗲𝗿𝗺𝗮𝗹 𝗣𝗼𝘄𝗲𝗿: ✅ Backup for RE fluctuations ✅ Grid frequency stability ✅ Peak demand support (especially post-sunset) ✅ Preventing blackouts during unexpected RE shortfalls 🔹 𝗧𝗵𝗲 𝗘𝗻𝗲𝗿𝗴𝘆 𝗠𝗶𝘅 𝗼𝗳 𝟮𝟬𝟯𝟬: 📉 Thermal power’s share in installed capacity will decline to 35.5% (from 57% in 2023). 📈 RE’s share (including large hydro) will rise to 62.4% (from 41.4% in 2023). 🔥 Yet, coal demand will still be ~1019.6 million tonnes due to its role as a reliability anchor. 📢 𝗧𝗵𝗲 𝗩𝗲𝗿𝗱𝗶𝗰𝘁 – 𝗛𝗼𝘄 𝗥𝗲𝗮𝗱𝘆 𝗔𝗿𝗲 𝗪𝗲? India’s energy future is RE-driven, but thermal power will remain the backbone of stability. The optimal generation mix must balance RE expansion with sufficient thermal capacity and storage solutions to ensure an uninterrupted power supply. Also, refer https://lnkd.in/gGSDmWKj (by Hannah Ritchie & Pablo Rosado). What’s your take on India’s evolving power mix?⚡ #Renewable #Energy #EnergyTransition #GridStability #India #power #thermal #development #optimal #world

It has been truly busy time, diving deep into the causes and dynamics of the Iberian blackout last week. After all, I wanted to take a step back and compile the most frequent technical questions I’ve received, along with my personal answers based on experience and system technology perspective. I think this recent grid event raised some important lessons for power system stability in high-renewable grids. Here’s a simplified closer look, question by question: Q1: Did renewables cause the blackout? Cannot say directly. But with ~60% solar and ~10% wind generation at the time, the grid had low inertia due to inverter-based sources. This lack of synchronous inertia left the system vulnerable actually. That means as a disturbance occurred, the frequency deviation was sharper and faster, overwhelming protection systems before corrective action could stabilize the grid. Q2: Why is inertia so critical? Inertia from synchronous generators acts instantly with the frequency deviation, slowing down frequency changes by releasing kinetic energy. Without inertia, frequency falls faster and deeper, reducing reaction time for controls and risking cascading trips. Q3: Would more thermal or hydro have prevented it? Very likely yess, because synchronous thermal and hydro plants don’t just supply inertia; they provide short-circuit strength crucial for fault clearing and relay operation. Their presence also improves voltage stability and mitigates frequency oscillations. Without these stabilizers, a high-inverter grid faces higher risk during disturbances. Q4: Can batteries (BESS) or fast frequency response (FFR) replace inertia? Unfortunately not fully (or very very less than imagined / expected). Because BESS and FFR react after(!) a frequency deviation occurs; inertia works with(!) the deviation, inherently delaying the drop. While grid-forming inverters and synthetic inertia are promising technologies, they cannot (yet) replicate the instantaneous stabilizing effect of physical rotating mass at system scale. Q5: What’s the way forward for high-renewable grids? I think a robust future grid actually should have a balance. In that scenario, renewables deliver clean energy; synchronous thermal, hydro, and pumped storage provide inertia and grid strength; grid-forming inverters enhance stability but cannot entirely replace synchronous inertia. After all as a short summary, I can clearly state that decarbonization doesn’t mean eliminating inertia; it means integrating renewables with inertia-providing resources to ensure frequency stability, fault tolerance and protection system performance. The Iberian event echoes lessons from Europe’s Jan 8, 2021 grid split. Let’s never forget, inertia remains the backbone of a stable 50 Hz synchronous grid☘️

Grid Control Series: How grid frequency stays stable even when power consumption fluctuates. Curious? Let me explain below! 👇 This will be the first post of the grid control series which will cover grid control methods, why they are needed and what are the challenges within the actual energy transformation. One key aspect of each power grid system is a stable frequency. But how is it ensured that the frequency remains stable even when continuous load changes occur within the grid? The frequency of the power system depends directly on differences between the generated power and the consumed power. It can be imagined as a scale that, when there is an imbalance ➡️ the frequency will decrease if consumption is bigger than generation ➡️ the frequency will increase if consumption is lower than generation ➡️ Traditional Power Systems: In traditional power systems (Large power plants) the following mechanisms stabilize the frequency of the grid: 1️⃣ Dynamic load fluctuations are absorbed to a certain extent by the inertia of rotating masses and their stored kinetic energy. This natural inertia resists rapid frequency changes. 2️⃣ Frequency deviations are further stabilized by the provision of controllable reserve power, which is traded on the reserve power market. 3️⃣ For larger frequency deviations (e.g., ±200 mHz in Germany), inherent system functions of the power controllers like P(f) come into play. These are specified in standards (e.g., VDE AR-N-4110) in Germany and must be provided by every generation unit. ➡️ Modern Grid Approaches with Renewable Energies: As renewable and inverter-based generation increases, physical inertia decreases as they typically don't provide mechanical inertia like traditional generators. However, modern grid forming inverters combined with battery storage systems are able to emulate the inertia and thus, to stabilize the grid on dynamic load changes (1️⃣) by: ✅ Virtual Synchronous Machines (VSM) ✅ Virtual Inertia Emulation ✅ Droop Control In addtion, as in traditional approaches they are also able to participate in the reserve power market (2️⃣) as well to provide frequency control mechanisms like P(f) (3️⃣). This allows modern grids to maintain frequency stability even in low-inertia conditions. What are your main challenges in designing and controlling renewable energy systems in modern grids? #ControlSystemEngineering #GridStability #ActivePowerControl #InertiaEmulation #RenewableEnergy #PowerSystems #Simulation

As winter storms roll across large parts of the country this week, utilities are preparing for what could be significant strain on regional power grids. Heavy snow is one thing but ice storms in regions unaccustomed to winter weather often lead to widespread outages and unpredictable spikes in demand. It’s a good reminder of how critical infrastructure works together during moments like this. One question I get a lot is: “Do data centers add pressure to the grid during these events?” In reality, it’s often the opposite. At NTT Global Data Centers, our facilities are classified as critical infrastructure in the U.S. That means we’re built with layers of redundancy including the ability to automatically switch to generator power during emergencies. When communities face extreme heat or cold and the grid is under stress, we can move off the grid entirely to free up capacity where it’s needed most. This is known as demand response, and we’ve activated it in regions like California and Virginia during heat waves to help prevent brownouts and keep communities online. A few things people don’t always realize: 1. We’re consistent energy users. Unlike homes or office buildings with big swings in usage (think the 5 p.m. AC surge), data centers draw steady, predictable power. That stability actually helps the grid. 2. We fund our own substations. Large power users, including data centers, are responsible for building the substations required to support high-voltage feeds. That investment ultimately strengthens distribution capacity for surrounding areas. 3. Every facility undergoes rigorous power studies. Before anything is built, utilities perform extensive modeling to ensure we’re not burdening the local grid — the same process that applies to new neighborhoods, hospitals, or industrial facilities. As storms roll in and grid operators work to balance demand, it’s more important than ever that all parts of the energy ecosystem work together. Demand response is just one example of how critical facilities, like data centers can play a stabilizing role when communities need it most. Stay safe, stay warm — and let’s all be patient with the crews out in the weather keeping the lights on.  #CommunitySupport #WinterStorm2026 #GridReliability #DemandResponse #CriticalInfrastructure #NTTGlobalDataCenters #EnergyResilience #PowerGrid #PublicSafety

⚡ Spain’s April 28 Blackout: It Wasn’t About Renewables or Inertia On April 28, Spain experienced a major power outage. Very quickly, some voices rushed to blame renewables: “Too much wind and solar! Not enough inertia from coal and gas!” But now, Spain’s official report is out. And it tells a very different story. 🚨 What really happened? • There was a voltage control failure on the grid — not a frequency drop. • A large thermal power plant was mistakenly taken offline. • The grid was hit by oscillations across Europe, and couldn’t absorb the shock. • The loss of voltage control caused a chain reaction of outages — even if the system had run on 100% coal, it wouldn’t have helped. In short: ➡️ The problem wasn’t lack of inertia. It was a lack of fast, flexible control systems. 🔧 So… what’s the difference? 🌀 Inertia Comes from big spinning machines (coal, gas, nuclear). Helps slow down changes in frequency. Useful — but not what failed here. ⚡ Voltage Control Keeps the power level stable so the grid doesn’t “wobble”. Needs fast-response systems to inject or absorb “reactive power”. That’s what was missing. ✅ What could have actually helped? Here’s what really supports a modern, stable grid: 1. Fast voltage stabilizers → Devices like STATCOMs, synchronous condensers, or smart inverters in wind and solar that react instantly. 2. Grid-forming technology → Batteries and advanced inverters that actively shape and support the grid. 3. Better system operations → Avoiding errors like taking a key power plant offline during sensitive periods. 4. Real-time coordination across borders → Tools that manage European grid oscillations before they snowball. 🧠 Personal Final Thought This blackout wasn’t a failure of renewables. It was a failure to invest in the tools that make any modern grid work — fast, smart, automated stability systems. The energy transition doesn’t just need clean generation — It needs a resilient, digital-ready grid to carry it. 🙋♂️ would be happy to have your views on this topic… will it happen again… more and more? Tikehau Capital International Energy Agency (IEA) David Martín Christian ROUQUEROL Rafael Pinedo Mendizabal Jose María Mateu Sánchez-Ocaña Marta Ramirez Segura Alessandro Blasi

On 28 April, my home country of Spain 𝐩𝐥𝐮𝐧𝐠𝐞𝐝 𝐢𝐧𝐭𝐨 𝐝𝐚𝐫𝐤𝐧𝐞𝐬𝐬 🌑. We now know that the root cause was a sequence of voltage oscillations that triggered widespread grid instability – like a tightrope walker wobbling without a safety net. Under normal conditions, such fluctuations (or wobbles) are absorbed by stabilising mechanisms (the safety net). But this time, there were fewer synchronous generators online than planned, and several failed to respond to control signals. Insufficient voltage control and limited cross-border transmission capacity further weakened the system’s footing. As the instabilities intensified, multiple generation units disconnected and the grid, unable to recover its balance, collapsed. The key lesson: 𝐢𝐭’𝐬 𝐧𝐨𝐭 𝐚𝐛𝐨𝐮𝐭 𝐰𝐡𝐞𝐭𝐡𝐞𝐫 𝐠𝐫𝐢𝐝𝐬 𝐜𝐚𝐧 𝐡𝐚𝐧𝐝𝐥𝐞 𝐫𝐞𝐧𝐞𝐰𝐚𝐛𝐥𝐞𝐬, 𝐛𝐮𝐭 𝐡𝐨𝐰 𝐰𝐞 𝐚𝐝𝐚𝐩𝐭 𝐨𝐮𝐫 𝐢𝐧𝐟𝐫𝐚𝐬𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐫𝐞𝐠𝐮𝐥𝐚𝐭𝐢𝐨𝐧𝐬 𝐭𝐨 𝐞𝐧𝐬𝐮𝐫𝐞 𝐫𝐞𝐬𝐢𝐥𝐢𝐞𝐧𝐜𝐞 𝐚𝐧𝐝 𝐬𝐞𝐜𝐮𝐫𝐢𝐭𝐲. At InnoEnergy, we support companies that strengthen 𝐠𝐫𝐢𝐝 𝐫𝐞𝐥𝐢𝐚𝐛𝐢𝐥𝐢𝐭𝐲. As their solutions scale, the future will look very different, with grid failures becoming a thing of the past. For example:   🔋Repono's battery storage, when scaled at large, will together with other grid side energy storage facilities represent a massive resource of grid forming inverters - supporting both frequency and voltage stability of the grid. 🔌Skeleton Technologies’s supercapacitors, if deployed at scale, integrated as active energy sources in statcoms offer a real-time stabilizing tool for the grid - particularly during high volatility and renewable integration. ⚡️Enline Energy Solutions’s virtual-sensor technology and predictive analytics provide real-time grid insights. If implemented, it could provide dynamic line rating, increasing the capacity of existing grid infrastructure. 📊Energiot’s overhead line sensors will also provide real time data for dynamic line rating, as well as a better understanding of the status of the grid.   In my latest Forbes article, I take a closer look at the 𝒃𝒍𝒂𝒄𝒌𝒐𝒖𝒕, 𝒕𝒉𝒆 𝒃𝒍𝒂𝒎𝒆 𝒈𝒂𝒎𝒆, 𝒂𝒏𝒅 𝒕𝒉𝒆 𝒇𝒖𝒕𝒖𝒓𝒆 𝒐𝒇 𝒕𝒉𝒆 𝒈𝒓𝒊𝒅. Have a read and let me know what you think, link is below in the comments. 👇

Grid stability is something most people never think about — yet it is what keeps every light on, every hospital running, and every industry operating. Traditionally, power system stability was supported by large synchronous generators whose rotating mass naturally helped dampen disturbances. Today, as renewable energy continues to scale, the grid is becoming lighter and more dynamic. In my recent graduate studies, I’ve been exploring how increasing inverter-based resources are reshaping stability considerations in modern power systems. One insight stands out: Stability is no longer just about generation adequacy — it is increasingly about response speed. The ability of a system to detect, react, and recover from disturbances in milliseconds is becoming a defining characteristic of resilient grids. This shift is pushing engineers to rethink conventional planning and adopt smarter control strategies, advanced protection schemes, and grid-forming technologies. The power grid is evolving from a purely mechanical system into a highly coordinated electro-digital network. Understanding this transformation is what makes power engineering both challenging and incredibly exciting today.