Skip to Main Content
 

Global Search Box

 
 
 

ETD Abstract Container

Abstract Header

Modeling and experiment of fission products release and interaction with coolant for defective fuel in Light Water Reactor(LWR)

Abstract Details

2017, Master of Science, Ohio State University, Nuclear Engineering.
During the normal operation of light water reactor, fuel defects can reside on fuel cladding from various reason such as fuel-pellet mechanical interaction, the hydriding of the Zr clad, the grid fritting from the assembly support, the warp wire fritting with the clad and also the stress corrosion cracking (SCC). The formation of defects on fuel cladding will result water ingression to the gap and react with nuclear fuel and the cladding inner surface. The interaction of water and nuclear fuel will affect the fuel thermal properties and deteriorate the cladding by hydriding and change of oxygen potential in the fuel. The change of fuel thermal properties will decrease the thermal conductivity, lead the decrease of heat transfer coefficient which may increase the fuel melting risk. The volatile fission products and fission gas will release to the coolant through cladding defects and increase the coolant activity and the defective nuclear fuel becomes a fission product source term when reactor is under normal operation. Experimental and modeling are applied to understand the behavior of a defective fuel pin. The experimental part focuses on the dissolution test of rare earth fission products in simulated LWR coolant chemistry and the diffusion coefficient measurement of cesium iodide in simulated LWR coolant chemistry using Nuclear Magnetic Resonance (NMR) technique. Rare earth fission products significantly contribute the residual heat and large quantity of radioactivity after the core shut down or in severe accident, therefore, their dissolution kinetic parameters in LWR are important to reactor safety and the understanding the source terms. The solubility test of rare earth fission product species (La2O3, Nd2O3 and CeO2) in simulate LWR coolant water (1000 ppm H3BO3 and 2 ppm LiOH) under different temperatures (room temperature 23 oC, 40 oC, 60 oC and 80 oC), results show that Neodymium oxide has the largest solubility in boric acid water and cerium oxide has the lowest solubility, the addition of boric acid will significantly increase the solubility of rare earth oxide in boric acid water. The diffusion coefficient of cesium iodide in boric acid water is measured using NMR technique. The NMR Diffusion-Ordered Spectroscopy (DOSY) measurement of Cs+ in simulated LWR coolant chemistry shows the self-diffusion coefficient of Cs+ is about 3.04 × 10-11 m2/s, and shows little dependence on Cs+ concentration in the solution. The measured data is about 100 times smaller than Cs+ in free water, different solution composition, temperature difference, pH difference and also the measurement method difference may cause the difference. The cesium transport and diffusion through the fuel matrix based on a fuel oxidation model is established. MOOSE/BISON code developed by Idaho National Laboratory is used to develop the cesium release model, the oxidation model results from the developed model agree with the results in reference which validate the model development using MOOSE/BISON. The cesium release model shows the time dependent cesium release after fuel defects reside on the fuel cladding, the radioactivity release to the coolant will be significant in the long term operation. The releasing of Cs into the coolant is significant when the fuel-water contact area is about 5%. And the releasing of Cs into the coolant will be significant when the diffusion coefficient of Cs in the fuel matrix increases 10 times.
Jinsuo Zhang (Advisor)
Marat Khafizov (Advisor)
115 p.

Recommended Citations

Citations

  • Xue, S. (2017). Modeling and experiment of fission products release and interaction with coolant for defective fuel in Light Water Reactor(LWR) [Master's thesis, Ohio State University]. OhioLINK Electronic Theses and Dissertations Center. http://rave.ohiolink.edu/etdc/view?acc_num=osu1492734885411167

    APA Style (7th edition)

  • Xue, Sha. Modeling and experiment of fission products release and interaction with coolant for defective fuel in Light Water Reactor(LWR). 2017. Ohio State University, Master's thesis. OhioLINK Electronic Theses and Dissertations Center, http://rave.ohiolink.edu/etdc/view?acc_num=osu1492734885411167.

    MLA Style (8th edition)

  • Xue, Sha. "Modeling and experiment of fission products release and interaction with coolant for defective fuel in Light Water Reactor(LWR)." Master's thesis, Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1492734885411167

    Chicago Manual of Style (17th edition)