Search Results for "program"

...ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones. For real-time, autonomous speech synthesis, check out ESP8266SAM, a library that uses this one and a port of an ancient format-based synthesis program to allow your ESP8266 to talk with low memory and no network required. All this code is released under the GPL, and all of it is to be used at your own risk. If you find any bugs, please let me know via the GitHub issue tracker or drop me an email. The MOD and MP3 routines were taken from StellaPlayer and libMAD respectively. The software I2S delta-sigma 32x oversampling DAC was my own creation and sounds quite good if I do say so myself.

...More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each segment's mode, color, speed, and direction (normal or reverse). Note, some effects make use of more than one color (up to three) and are programmed by specifying an array of colors. Random color introduced alternating from start and end of strip. Alternating white/red/black pixels running. Strobe effect with different strobe count and pause, controlled by speed setting. ...

...See https://ko-fi.com/post/The-Story-of-GCBASIC-Making-Microcontroller-Progr-D1D319SJ72 for story of GCBASIC. This is a continuous release project. The latest release is always available. This will give you the most complete development toolchain to create and program 8-bit PIC, AVR and LGT microcontrollers. We have added new capabilities that make GCBASIC the easiest tool set available - supporting over 1400 microcontrollers with tools to make this fun and simple. Please see the download section for your options. We have two IDEs, we have just the compiler and we have a minimal install - it is your choice. ...

HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick.

A new way to program on VEX Robotics.Easy vb-style objective program style.

Ce projet a pour but de faciliter la programmation de parcours pour robots vex avec des encoders. Il suffit de placer des point sur l'image, de définir une échelle et d'indiquer la distant qui sépare les roues motrices et le programme va générer un code RobotC que vous pourrez utiliser pour programmer votre robot ! Et il y a évidement pleins d'outils indispensables pour vous rendre la tâche plus facile ;). https://www.youtube.com/watch?feature=player_embedded&v=4U9jdZDquII

...DISCLAIMER: this is not like the diamond bullet studios simulation, this only simulates how the hardware would act, so that code can be tested. It is not our goal to provide a program that allows simulation for strategy testing, nor will it ever be.

SILENT is a Scratch modification that interfaces with LEGO MINDSTORM NXT 2.0 robot. It's based on Scratch 1.4.2, developed in JAVA, Squeak and Bash scripting. It's supported by Linux and Windows XP/7, in which it was tested. It required JAVA>=6. Easy to setup and easy to learn! Please leave your review to help me to improve it!

...https://github.com/cmwslw/nxt-plus-plus NXT++ is an interface written in C++ that allows the control LEGO MINDSTORMS NXT robots directly through a USB or Bluetooth connection. The interface is intended to be simple and easy to use. The interface can be used in any C++ program.

...Also included is a diagnostic application named Roomba-Term that uses the framework. I invite you to use the Roomba-Term software as a tool & an example on how to program with the C# SCI

Written in C++, IFI-picloader is a US First Competition Linux port for Innovation First Inc. Robot Controller programmer using a pic 18F8520. It writes MCC18 compiled hex files to PIC and allows users to program under *nix based operating systems.

IM Bot Framework is an adapter to interface console I/O programs to IM servers. The goal of this program is to allow easy development of bots in any programming language that can read from and write to stdio.