Search Results for "voltcraft"

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

This is a Perl application enabling downloading and configuring the Voltcraft DL-141TH temperature and humidity sensors device. Targeted at Operating Systems supporting libusb. This application exists thanks to reverse engineering.

OpenHantek is a free software for Hantek (Voltcraft/Darkwire/Protek/Acetech) USB DSOs based on HantekDSO. The UI is written in C++/Qt 4 and uses OpenGL to draw the graphs. It was tested with the DSO-2090, test results with other models are welcome.

Software for the Voltcraft DL-120TH USB climate data logger project status: abandoned similar projects: https://www.sigrok.org/ framework for signal analysis https://gitlab.com/roeles/vdl120 vdl120 fork, based on apuch/vdl120 https://github.com/apuch/vdl120 vdl120 fork with PID2 0xea61, automatic EP_OUT + EP_IN, memset 0 *cfg see bug #3 https://github.com/lgyurci/voltcraft-dl191v based on vdl120 Voltcraft DL-191V voltage logger https://github.com/patrabu/dl120th dl120th in Python https://github.com/mildis/vdl120 vdl120 in Objective-C for macOS https://launchpad.net/vdl180 vdl180 in C for Voltcraft DL-180THP https://gitlab.com/kollo/X11-Basic_examples/blob/master/All/Tests/usb-VDL101T.bas usb-VDL101T in X11-Basic for Voltcraft DL-101T https://sourceforge.net/p/vdl-141th/code/ci/master/tree/lib/DL141TH/ perl module for Voltcraft DL-141TH temperature + humidity data logger

Hantek DSO-2150 software (Voltcraft/Darkwire/Protek/Acetech e.t.c DSO-2090/2150/2250/5200A e.t.c)

Software for the Voltcraft(R) IR-365RF wireless infrared thermometer

gDMM is a GTK+ 2 based application which reads data from a Digital Multimeter (Metex/Voltcraft or compatible, e.g. M-3650D) through the serial interface (RS-232) and draws a graph out of this data. Measurements can also be saved to/loaded from disk.