Search Results for "bootloader#"

What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? ...

Pinguino is an electronics prototyping platform. It supports different 8- and 32-bit ©Microchip microcontrollers, all with built-in USB module. Pinguino comes with a USB Bootloader, a small program running inside the microcontroller which is responsible for transferring your application from your PC to the microcontroller memory and handing over the control to this program afterwards. No programmer is then needed, only a USB cable and a PC. Pinguino is also an Integrated Development Environement (IDE) which gives everyone the ability to write, compile and upload programs on a Pinguino board.

Small universal tool for handling USART STM32 bootloader. Works with all STM32 family devices (also with newest STM32F4 and STM32F0). Dedicated especially for Linux users. Works in shell. There are plans to make a GUI overlay.

Set of tools for programming STM8 microcontrollers, including assembler, linker and flashing tool via integrated bootloader.

Simple command-line tool to download/upload firmware to/from STM32 MCU with factory preprogrammed serial bootloader. Look <a href="http://openfacts2.berlios.de/wikien/index.php/BerliosProject:STM%20Flasher">wiki</a> for more info.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

TrustedGRUB extends the GRUB bootloader with TCG support. This makes it possible to provide a secure bootstrap architecture. The whole boot process is measured and - by support of a Trusted Platform Module (TPM) - the system integrity is verifyable.

ATmon is a bootloader and monitor tool for the Atmel ATmega32 microcontroller.

A complete bootloader that can load both an AVR processor and a Xilinx FPGA using a DataFLASH device to store programs.

This is a python library that can be used to build Linux kernel, which includes selecting kernel config file, setting kernel config parameters, compiling kernel, modules and even appending a new item for the compiled kernel to bootloader config file (cur

Enterprise is a custom UEFI bootloader designed to load Linux distributions directly from ISO files on Apple Mac computers (even those without UEFI booting support). It is designed to compliment Mac Linux USB Loader, though it can also be used separately (albeit with some setup work). The purpose of Enterprise is as the first stage in a two-stage booting process for Mac Linux USB Loader-created USB drives.