Open Source IoT Software

Firmware for ESP8266 modules. http://www.esp8266.nu/index.php/Tutorial_ESPEasy_Firmware_Upload Use an ESP8266 module as a wireless sensor for temperature, humidity, barometric pressure, LUX, etc. Or use it as an actuator to control Relays. Supports the following Home Automation platform protocols: * Domoticz HTTP * Domoticz MQTT * OpenHAB MQTT * PiDome MQTT * Nodo Telnet * ThingSpeak webservice * EmonCMS * FHEM HTTP * Generic HTTP using templates Supported devices: * DS18B20 * DHT11 * DHT22 * BH1750 * BMP085 * Wiegand RFID * PN532 * SI7021 * TSL2516 * HCSR04 * TSOP4838 IR * MCP23017 * PCF8591 * PCA9685 * LCD and OLED displays * BME280 * INA219 * MLX90614 * ADS1115 * MSP5611 * BMP280 * SHT1x The ESP is web configurable for both Wifi setup and device configuration. For support: - have a look at the wiki on www.esp8266.nu - join our forum on www.esp8266.nu/forum

The AWS-IoT-Arduino-Yún-SDK allows developers to connect their Arduino Yún compatible Board to AWS IoT. By connecting the device to the AWS IoT, users can securely work with the message broker, rules and the Thing Shadow provided by AWS IoT and with other AWS services like AWS Lambda, Amazon Kinesis, Amazon S3, etc. The AWS-IoT-Arduino-Yún-SDK consists of two parts, which take use of the resources of the two chips on Arduino Yún, one for native Arduino IDE API access and the other for functionality and connections to the AWS IoT built on top of AWS IoT Device SDK for Python. The AWS-IoT-Arduino-Yún-SDK provides APIs to let users publish messages to AWS IoT and subscribe to MQTT topics to receive messages transmitted by other devices or coming from the broker. This allows to interact with the standard MQTT PubSub functionality of AWS IoT.

gigasetelements-cli is a python based program which allows you to control your Gigaset Elements home security system. It comes with an easy to use CLI (command-line interface) suitable for direct use or cron jobs.

iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for Raspberry Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. See - ionware.io/free-offer/