NPC_GetCurrentPathPointIndex
cảnh báo
Đã thêm hàm trong phiên bản omp v1.5.8.3079. Mục này không hoạt động trên các phiên bản cũ hơn!
Description
Gets the current path point index an NPC is moving towards.
| Name | Description |
|---|---|
| npcid | The ID of the NPC |
Returns
Returns the current path point index the NPC is moving towards.
Examples
public OnPlayerCommandText(playerid, cmdtext[])
{
// The commands to create paths and to create points on paths
if (!strcmp(cmdtext, "/startpatrol", true))
{
new npcid = PlayerNPC[playerid];
if (npcid == INVALID_NPC_ID)
return SendClientMessage(playerid, 0xFF0000FF, "You are not debugging a NPC.");
new count = NPC_GetPathPointCount(PlayerPatrolPath[playerid]);
if (NPC_IsValidPath(PlayerPatrolPath[playerid]))
{
NPC_MoveByPath(npcid, PlayerPatrolPath[playerid], NPC_MOVE_TYPE_WALK);
SendClientMessage(playerid, 0x00FF00FF, "NPC %d started patrol route with %d points", npcid, count);
PlayerPatrolTimer[playerid] = SetTimerEx("CheckPathProgress", 2000, true, "i", playerid);
}
else
{
SendClientMessage(playerid, 0xFF0000FF, "Failed to start patrol route");
}
return 1;
}
return 0;
}
forward CheckPathProgress(playerid);
public CheckPathProgress(playerid)
{
if (!IsPlayerConnected(playerid))
{
// Do something about it
return 0;
}
new npcid = PlayerNPC[playerid];
if (npcid == INVALID_NPC_ID || !NPC_IsValid(npcid))
{
// Do something about it
return 0;
}
if (!NPC_IsValidPath(PlayerPatrolPath[playerid]))
{
// Do something about it
return 0;
}
new currentPoint = NPC_GetCurrentPathPointIndex(npcid);
new totalPoints = NPC_GetPathPointCount(PlayerPatrolPath[playerid]);
if (currentPoint != INVALID_NODE_ID)
{
SendClientMessage(playerid, 0xFFFF00FF, "NPC %d progress: Point %d of %d", npcid, currentPoint + 1, totalPoints);
}
return 1;
}
Notes
- Returns -1 if the NPC is not following a path
- This indicates the point the NPC is currently moving towards
Related Functions
- NPC_MoveByPath: Make NPC follow a path
- NPC_CreatePath: Create a new path
- NPC_AddPointToPath: Add point to path
- NPC_GetPathPointCount: Get total points in path
Related Callbacks
- OnNPCFinishMovePath: Called when NPC finishes path
- OnNPCFinishMove: Called when NPC finishes movement