prepared statements) (Tom)
Assume NaN value to be larger than any other value in MIN()/MAX() (Tom)
Prevent interval from supressing ':00' seconds display
+New pg_get_triggerdef(prettyprint) and pg_constraint_is_visible() functions
_________________________________________________________________
just a preformatted message (Tom, Sean Chittenden)
Allow control SSL negotiation with sslmode values "disable", "allow",
"Prefer", and "require" (Jon Jensen)
+Allow new error codes and levels of text (Tom)
+Allow access to the underlying table and column of a query result (Tom)
+Allow access to the current transaction status (Tom)
+Add ability to pass binary data directly to the backend (Tom)
_________________________________________________________________
-# $Header: /cvsroot/pgsql/config/ac_func_accept_argtypes.m4,v 1.4 2002/03/29 17:32:53 petere Exp $
+# $Header: /cvsroot/pgsql/config/ac_func_accept_argtypes.m4,v 1.4.4.1 2003/09/07 04:36:39 momjian Exp $
# This comes from the official Autoconf macro archive at
# <http://research.cys.de/autoconf-archive/>
# (I removed the $ before the Id CVS keyword below.)
dnl @synopsis AC_FUNC_ACCEPT_ARGTYPES
dnl
dnl Checks the data types of the three arguments to accept(). Results are
-dnl placed into the symbols ACCEPT_TYPE_ARG[123], consistent with the
-dnl following example:
+dnl placed into the symbols ACCEPT_TYPE_RETURN and ACCEPT_TYPE_ARG[123],
+dnl consistent with the following example:
dnl
+dnl #define ACCEPT_TYPE_RETURN int
dnl #define ACCEPT_TYPE_ARG1 int
dnl #define ACCEPT_TYPE_ARG2 struct sockaddr *
dnl #define ACCEPT_TYPE_ARG3 socklen_t
# Solaris 7 and 8 have arg3 as 'void *' (disguised as 'Psocklen_t'
# which is *not* 'socklen_t *'). If we detect that, then we assume
# 'int' as the result, because that ought to work best.
+#
+# On Win32, accept() returns 'unsigned int PASCAL'
AC_DEFUN([AC_FUNC_ACCEPT_ARGTYPES],
[AC_MSG_CHECKING([types of arguments for accept()])
- AC_CACHE_VAL(ac_cv_func_accept_arg1,dnl
- [AC_CACHE_VAL(ac_cv_func_accept_arg2,dnl
- [AC_CACHE_VAL(ac_cv_func_accept_arg3,dnl
- [for ac_cv_func_accept_arg1 in 'int' 'unsigned int'; do
- for ac_cv_func_accept_arg2 in 'struct sockaddr *' 'const struct sockaddr *' 'void *'; do
- for ac_cv_func_accept_arg3 in 'int' 'size_t' 'socklen_t' 'unsigned int' 'void'; do
- AC_TRY_COMPILE(
+ AC_CACHE_VAL(ac_cv_func_accept_return,dnl
+ [AC_CACHE_VAL(ac_cv_func_accept_arg1,dnl
+ [AC_CACHE_VAL(ac_cv_func_accept_arg2,dnl
+ [AC_CACHE_VAL(ac_cv_func_accept_arg3,dnl
+ [for ac_cv_func_accept_return in 'int' 'unsigned int PASCAL'; do
+ for ac_cv_func_accept_arg1 in 'int' 'unsigned int'; do
+ for ac_cv_func_accept_arg2 in 'struct sockaddr *' 'const struct sockaddr *' 'void *'; do
+ for ac_cv_func_accept_arg3 in 'int' 'size_t' 'socklen_t' 'unsigned int' 'void'; do
+ AC_TRY_COMPILE(
[#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
-extern int accept ($ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *);],
- [], [ac_not_found=no; break 3], [ac_not_found=yes])
+extern $ac_cv_func_accept_return accept ($ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *);],
+ [], [ac_not_found=no; break 4], [ac_not_found=yes])
+ done
done
done
done
if test "$ac_cv_func_accept_arg3" = "void"; then
ac_cv_func_accept_arg3=int
fi
+ ])dnl AC_CACHE_VAL
])dnl AC_CACHE_VAL
])dnl AC_CACHE_VAL
])dnl AC_CACHE_VAL
- AC_MSG_RESULT([$ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *])
+ AC_MSG_RESULT([$ac_cv_func_accept_return, $ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *])
+ AC_DEFINE_UNQUOTED(ACCEPT_TYPE_RETURN, $ac_cv_func_accept_return,
+ [Define to the return type of 'accept'])
AC_DEFINE_UNQUOTED(ACCEPT_TYPE_ARG1, $ac_cv_func_accept_arg1,
[Define to the type of arg 1 of 'accept'])
AC_DEFINE_UNQUOTED(ACCEPT_TYPE_ARG2, $ac_cv_func_accept_arg2,
#
# Autoconf macros for configuring the build of Python extension modules
#
-# $Header: /cvsroot/pgsql/config/python.m4,v 1.5 2002/09/04 22:54:18 petere Exp $
+# $Header: /cvsroot/pgsql/config/python.m4,v 1.5.4.1 2003/09/07 04:36:39 momjian Exp $
#
# PGAC_PATH_PYTHON
python_prefix=`${PYTHON} -c "import sys; print sys.prefix"`
python_execprefix=`${PYTHON} -c "import sys; print sys.exec_prefix"`
python_configdir="${python_execprefix}/lib/python${python_version}/config"
-python_moduledir="${python_prefix}/lib/python${python_version}/site-packages"
-python_moduleexecdir="${python_execprefix}/lib/python${python_version}/site-packages"
python_includespec="-I${python_prefix}/include/python${python_version}"
if test "$python_prefix" != "$python_execprefix"; then
python_includespec="-I${python_execprefix}/include/python${python_version} $python_includespec"
fi
-AC_SUBST(python_version)[]dnl
AC_SUBST(python_prefix)[]dnl
AC_SUBST(python_execprefix)[]dnl
AC_SUBST(python_configdir)[]dnl
-AC_SUBST(python_moduledir)[]dnl
-AC_SUBST(python_moduleexecdir)[]dnl
AC_SUBST(python_includespec)[]dnl
# This should be enough of a message.
if test "$python_prefix" != "$python_execprefix"; then
])# _PGAC_CHECK_PYTHON_DIRS
-# PGAC_CHECK_PYTHON_MODULE_SETUP
-# ------------------------------
-# Finds things required to build a Python extension module.
-# This used to do more, that's why it's separate.
-#
-# It would be nice if we could check whether the current setup allows
-# the build of the shared module. Future project.
-AC_DEFUN([PGAC_CHECK_PYTHON_MODULE_SETUP],
-[
- AC_REQUIRE([_PGAC_CHECK_PYTHON_DIRS])
-])# PGAC_CHECK_PYTHON_MODULE_SETUP
-
-
# PGAC_CHECK_PYTHON_EMBED_SETUP
# -----------------------------
# Courtesy of the INN 2.3.1 package...
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.53 for PostgreSQL 7.4beta1.
+# Generated by GNU Autoconf 2.53 for PostgreSQL 7.4beta2.
#
#
# Identity of this package.
PACKAGE_NAME='PostgreSQL'
PACKAGE_TARNAME='postgresql'
-PACKAGE_VERSION='7.4beta1'
-PACKAGE_STRING='PostgreSQL 7.4beta1'
+PACKAGE_VERSION='7.4beta2'
+PACKAGE_STRING='PostgreSQL 7.4beta2'
ac_unique_file="src/backend/access/common/heaptuple.c"
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures PostgreSQL 7.4beta1 to adapt to many kinds of systems.
+\`configure' configures PostgreSQL 7.4beta2 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of PostgreSQL 7.4beta1:";;
+ short | recursive ) echo "Configuration of PostgreSQL 7.4beta2:";;
esac
cat <<\_ACEOF
--with-tclconfig=DIR tclConfig.sh and tkConfig.sh are in DIR
--with-tkconfig=DIR tkConfig.sh is in DIR
--with-perl build Perl modules (PL/Perl)
- --with-python build Python interface module
+ --with-python build Python modules (PL/Python)
--with-java build JDBC interface and Java tools
--with-krb4[=DIR] build with Kerberos 4 support [/usr/athena]
--with-krb5[=DIR] build with Kerberos 5 support [/usr/athena]
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
-PostgreSQL configure 7.4beta1
+PostgreSQL configure 7.4beta2
generated by GNU Autoconf 2.53
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by PostgreSQL $as_me 7.4beta1, which was
+It was created by PostgreSQL $as_me 7.4beta2, which was
generated by GNU Autoconf 2.53. Invocation command line was
$ $0 $@
{ echo "$as_me:$LINENO: using CFLAGS=$CFLAGS" >&5
echo "$as_me: using CFLAGS=$CFLAGS" >&6;}
+# We already have this in Makefile.win32, but configure needs it too
+if test "$PORTNAME" = "win32"
+then
+ CPPFLAGS="$CPPFLAGS -Isrc/include/port/win32"
+fi
+
# Check if the compiler still works with the template settings
echo "$as_me:$LINENO: checking whether the C compiler still works" >&5
echo $ECHO_N "checking whether the C compiler still works... $ECHO_C" >&6
#
-# Optionally build Python interface module
+# Optionally build Python modules (PL/Python)
#
echo "$as_me:$LINENO: checking whether to build Python modules" >&5
echo $ECHO_N "checking whether to build Python modules... $ECHO_C" >&6
python_prefix=`${PYTHON} -c "import sys; print sys.prefix"`
python_execprefix=`${PYTHON} -c "import sys; print sys.exec_prefix"`
python_configdir="${python_execprefix}/lib/python${python_version}/config"
-python_moduledir="${python_prefix}/lib/python${python_version}/site-packages"
-python_moduleexecdir="${python_execprefix}/lib/python${python_version}/site-packages"
python_includespec="-I${python_prefix}/include/python${python_version}"
if test "$python_prefix" != "$python_execprefix"; then
python_includespec="-I${python_execprefix}/include/python${python_version} $python_includespec"
fi
-
-
-
echo "$as_me:$LINENO: checking how to link an embedded Python application" >&5
echo $ECHO_N "checking how to link an embedded Python application... $ECHO_C" >&6
fi
echo "$as_me:$LINENO: checking types of arguments for accept()" >&5
echo $ECHO_N "checking types of arguments for accept()... $ECHO_C" >&6
- if test "${ac_cv_func_accept_arg1+set}" = set; then
+ if test "${ac_cv_func_accept_return+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test "${ac_cv_func_accept_arg2+set}" = set; then
+ if test "${ac_cv_func_accept_arg1+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test "${ac_cv_func_accept_arg3+set}" = set; then
+ if test "${ac_cv_func_accept_arg2+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- for ac_cv_func_accept_arg1 in 'int' 'unsigned int'; do
- for ac_cv_func_accept_arg2 in 'struct sockaddr *' 'const struct sockaddr *' 'void *'; do
- for ac_cv_func_accept_arg3 in 'int' 'size_t' 'socklen_t' 'unsigned int' 'void'; do
- cat >conftest.$ac_ext <<_ACEOF
+ if test "${ac_cv_func_accept_arg3+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ for ac_cv_func_accept_return in 'int' 'unsigned int PASCAL'; do
+ for ac_cv_func_accept_arg1 in 'int' 'unsigned int'; do
+ for ac_cv_func_accept_arg2 in 'struct sockaddr *' 'const struct sockaddr *' 'void *'; do
+ for ac_cv_func_accept_arg3 in 'int' 'size_t' 'socklen_t' 'unsigned int' 'void'; do
+ cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
#ifdef HAVE_SYS_TYPES_H
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
-extern int accept ($ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *);
+extern $ac_cv_func_accept_return accept ($ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *);
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_not_found=no; break 3
+ ac_not_found=no; break 4
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_not_found=yes
fi
rm -f conftest.$ac_objext conftest.$ac_ext
+ done
done
done
done
fi
fi
- echo "$as_me:$LINENO: result: $ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *" >&5
-echo "${ECHO_T}$ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *" >&6
+
+fi
+ echo "$as_me:$LINENO: result: $ac_cv_func_accept_return, $ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *" >&5
+echo "${ECHO_T}$ac_cv_func_accept_return, $ac_cv_func_accept_arg1, $ac_cv_func_accept_arg2, $ac_cv_func_accept_arg3 *" >&6
+
+cat >>confdefs.h <<_ACEOF
+#define ACCEPT_TYPE_RETURN $ac_cv_func_accept_return
+_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define ACCEPT_TYPE_ARG1 $ac_cv_func_accept_arg1
+HAVE_IPV6=no
echo "$as_me:$LINENO: checking for struct sockaddr_in6" >&5
echo $ECHO_N "checking for struct sockaddr_in6... $ECHO_C" >&6
if test "${ac_cv_type_struct_sockaddr_in6+set}" = set; then
#define HAVE_IPV6 1
_ACEOF
+ HAVE_IPV6=yes
fi
fi
+
echo "$as_me:$LINENO: checking for PS_STRINGS" >&5
echo $ECHO_N "checking for PS_STRINGS... $ECHO_C" >&6
if test "${pgac_cv_var_PS_STRINGS+set}" = set; then
#
# For each platform, we need to know about any special compile and link
# libraries, and whether the normal C function names are thread-safe.
+# See the comment at the top of src/port/thread.c for more information.
#
if test "$enable_thread_safety" = yes; then
if test "${ac_cv_header_pthread_h+set}" = set; then
if test $ac_cv_header_pthread_h = yes; then
:
else
- { { echo "$as_me:$LINENO: error: pthread.h not found, required for --with-threads" >&5
-echo "$as_me: error: pthread.h not found, required for --with-threads" >&2;}
+ { { echo "$as_me:$LINENO: error: pthread.h not found, required for --enable-thread-safetys" >&5
+echo "$as_me: error: pthread.h not found, required for --enable-thread-safetys" >&2;}
{ (exit 1); exit 1; }; }
fi
Please report your platform threading info to the PostgreSQL mailing lists
so it can be added to the next release. Report all compile flags, link flags,
functions, or libraries required for threading support.
+See the comment at the top of src/port/thread.c for more information.
" >&5
echo "$as_me: error:
Cannot enable threads on your platform.
Please report your platform threading info to the PostgreSQL mailing lists
so it can be added to the next release. Report all compile flags, link flags,
functions, or libraries required for threading support.
+See the comment at the top of src/port/thread.c for more information.
" >&2;}
{ (exit 1); exit 1; }; }
fi
_LIBS="$LIBS"
CFLAGS="$CFLAGS $THREAD_CFLAGS"
LIBS="$LIBS $THREAD_LIBS"
+echo "$as_me:$LINENO: checking for strerror_r" >&5
+echo $ECHO_N "checking for strerror_r... $ECHO_C" >&6
+if test "${ac_cv_func_strerror_r+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char strerror_r (); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char strerror_r ();
+char (*f) ();
+#ifdef F77_DUMMY_MAIN
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int F77_DUMMY_MAIN() { return 1; }
+#endif
+int
+main ()
+{
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_strerror_r) || defined (__stub___strerror_r)
+choke me
+#else
+f = strerror_r;
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_strerror_r=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_func_strerror_r=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_strerror_r" >&5
+echo "${ECHO_T}$ac_cv_func_strerror_r" >&6
+if test $ac_cv_func_strerror_r = yes; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: strerror_r not found, required on this platform for --enable-thread-safety" >&5
+echo "$as_me: error: strerror_r not found, required on this platform for --enable-thread-safety" >&2;}
+ { (exit 1); exit 1; }; }
+fi
-for ac_func in strerror_r getpwuid_r gethostbyname_r
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
+echo "$as_me:$LINENO: checking for getpwuid_r" >&5
+echo $ECHO_N "checking for getpwuid_r... $ECHO_C" >&6
+if test "${ac_cv_func_getpwuid_r+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below. */
+ which can conflict with char getpwuid_r (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char $ac_func ();
+char getpwuid_r ();
char (*f) ();
#ifdef F77_DUMMY_MAIN
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+#if defined (__stub_getpwuid_r) || defined (__stub___getpwuid_r)
choke me
#else
-f = $ac_func;
+f = getpwuid_r;
#endif
;
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
+ ac_cv_func_getpwuid_r=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
-eval "$as_ac_var=no"
+ac_cv_func_getpwuid_r=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
+echo "$as_me:$LINENO: result: $ac_cv_func_getpwuid_r" >&5
+echo "${ECHO_T}$ac_cv_func_getpwuid_r" >&6
+if test $ac_cv_func_getpwuid_r = yes; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: getpwuid_r not found, required on this platform for --enable-thread-safety" >&5
+echo "$as_me: error: getpwuid_r not found, required on this platform for --enable-thread-safety" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+echo "$as_me:$LINENO: checking for gethostbyname_r" >&5
+echo $ECHO_N "checking for gethostbyname_r... $ECHO_C" >&6
+if test "${ac_cv_func_gethostbyname_r+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char gethostbyname_r (); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname_r ();
+char (*f) ();
+#ifdef F77_DUMMY_MAIN
+# ifdef __cplusplus
+ extern "C"
+# endif
+ int F77_DUMMY_MAIN() { return 1; }
+#endif
+int
+main ()
+{
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_gethostbyname_r) || defined (__stub___gethostbyname_r)
+choke me
+#else
+f = gethostbyname_r;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_gethostbyname_r=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_func_gethostbyname_r=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname_r" >&5
+echo "${ECHO_T}$ac_cv_func_gethostbyname_r" >&6
+if test $ac_cv_func_gethostbyname_r = yes; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: gethostbyname_r not found, required on this platform for --enable-thread-safety" >&5
+echo "$as_me: error: gethostbyname_r not found, required on this platform for --enable-thread-safety" >&2;}
+ { (exit 1); exit 1; }; }
fi
-done
CFLAGS="$_CFLAGS"
LIBS="$_LIBS"
} >&5
cat >&5 <<_CSEOF
-This file was extended by PostgreSQL $as_me 7.4beta1, which was
+This file was extended by PostgreSQL $as_me 7.4beta2, which was
generated by GNU Autoconf 2.53. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-PostgreSQL config.status 7.4beta1
+PostgreSQL config.status 7.4beta2
configured by $0, generated by GNU Autoconf 2.53,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
s,@perl_useshrplib@,$perl_useshrplib,;t t
s,@perl_embed_ldflags@,$perl_embed_ldflags,;t t
s,@PYTHON@,$PYTHON,;t t
-s,@python_version@,$python_version,;t t
s,@python_prefix@,$python_prefix,;t t
s,@python_execprefix@,$python_execprefix,;t t
s,@python_configdir@,$python_configdir,;t t
-s,@python_moduledir@,$python_moduledir,;t t
-s,@python_moduleexecdir@,$python_moduleexecdir,;t t
s,@python_includespec@,$python_includespec,;t t
s,@python_libspec@,$python_libspec,;t t
s,@LIBOBJS@,$LIBOBJS,;t t
+s,@HAVE_IPV6@,$HAVE_IPV6,;t t
s,@THREAD_CFLAGS@,$THREAD_CFLAGS,;t t
s,@THREAD_LIBS@,$THREAD_LIBS,;t t
s,@HAVE_POSIX_SIGNALS@,$HAVE_POSIX_SIGNALS,;t t
dnl Process this file with autoconf to produce a configure script.
-dnl $Header: /cvsroot/pgsql/configure.in,v 1.280 2003/08/11 18:07:38 tgl Exp $
+dnl $Header: /cvsroot/pgsql/configure.in,v 1.280.2.1 2003/09/07 04:36:38 momjian Exp $
dnl
dnl Developers, please strive to achieve this order:
dnl
dnl Texinfo. Use this sorcery to use "docdir" instead of "infodir".
m4_define([info], [doc])
m4_define([infodir], [docdir])
m4_undefine([infodir])
m4_undefine([info])
AC_SUBST(docdir)
fi
AC_MSG_NOTICE([using CFLAGS=$CFLAGS])
+# We already have this in Makefile.win32, but configure needs it too
+if test "$PORTNAME" = "win32"
+then
+ CPPFLAGS="$CPPFLAGS -Isrc/include/port/win32"
+fi
+
# Check if the compiler still works with the template settings
AC_MSG_CHECKING([whether the C compiler still works])
AC_TRY_LINK([], [return 0;],
AC_SUBST(with_perl)
#
-# Optionally build Python interface module
+# Optionally build Python modules (PL/Python)
#
AC_MSG_CHECKING([whether to build Python modules])
-PGAC_ARG_BOOL(with, python, no, [ --with-python build Python interface module])
+PGAC_ARG_BOOL(with, python, no, [ --with-python build Python modules (PL/Python)])
AC_MSG_RESULT([$with_python])
AC_SUBST(with_python)
if test "$with_python" = yes; then
PGAC_PATH_PYTHON
- PGAC_CHECK_PYTHON_MODULE_SETUP
PGAC_CHECK_PYTHON_EMBED_SETUP
fi
AC_CHECK_DECLS(fdatasync, [], [], [#include <unistd.h>])
+HAVE_IPV6=no
AC_CHECK_TYPE([struct sockaddr_in6],
[AC_CHECK_FUNC(inet_ntop,
- [AC_DEFINE(HAVE_IPV6, 1, [Define to 1 if you have support for IPv6.])])],
+ [AC_DEFINE(HAVE_IPV6, 1, [Define to 1 if you have support for IPv6.])
+ HAVE_IPV6=yes])],
[],
[$ac_includes_default
#include <netinet/in.h>])
+AC_SUBST(HAVE_IPV6)
AC_CACHE_CHECK([for PS_STRINGS], [pgac_cv_var_PS_STRINGS],
[AC_TRY_LINK(
#
# For each platform, we need to know about any special compile and link
# libraries, and whether the normal C function names are thread-safe.
+# See the comment at the top of src/port/thread.c for more information.
#
if test "$enable_thread_safety" = yes; then
-AC_CHECK_HEADER(pthread.h, [], [AC_MSG_ERROR([pthread.h not found, required for --with-threads])])
+AC_CHECK_HEADER(pthread.h, [], [AC_MSG_ERROR([pthread.h not found, required for --enable-thread-safetys])])
if test "$SUPPORTS_THREADS" != yes; then
AC_MSG_ERROR([
Please report your platform threading info to the PostgreSQL mailing lists
so it can be added to the next release. Report all compile flags, link flags,
functions, or libraries required for threading support.
+See the comment at the top of src/port/thread.c for more information.
])
fi
else
_LIBS="$LIBS"
CFLAGS="$CFLAGS $THREAD_CFLAGS"
LIBS="$LIBS $THREAD_LIBS"
-AC_CHECK_FUNCS([strerror_r getpwuid_r gethostbyname_r])
+AC_CHECK_FUNC(strerror_r,
+ [], [AC_MSG_ERROR([strerror_r not found, required on this platform for --enable-thread-safety])])
+AC_CHECK_FUNC(getpwuid_r,
+ [], [AC_MSG_ERROR([getpwuid_r not found, required on this platform for --enable-thread-safety])])
+AC_CHECK_FUNC(gethostbyname_r,
+ [], [AC_MSG_ERROR([gethostbyname_r not found, required on this platform for --enable-thread-safety])])
CFLAGS="$_CFLAGS"
LIBS="$_LIBS"
fi
-# $Header: /cvsroot/pgsql/contrib/contrib-global.mk,v 1.5 2002/11/02 00:16:21 tgl Exp $
+# $Header: /cvsroot/pgsql/contrib/contrib-global.mk,v 1.5.4.1 2003/09/07 04:36:39 momjian Exp $
# This file contains generic rules to build many kinds of simple
# contrib modules. You only need to set a few variables and include
uninstall:
ifneq (,$(DATA)$(DATA_built))
- rm -f $(addprefix $(DESTDIR)$(datadir)/contrib/, $(DATA) $(DATA_built))
+ rm -f $(addprefix $(DESTDIR)$(datadir)/contrib/, $(notdir $(DATA) $(DATA_built)))
endif
ifdef MODULES
rm -f $(addprefix $(DESTDIR)$(pkglibdir)/, $(addsuffix $(DLSUFFIX), $(MODULES)))
int tokenlen;
int tsearch_yylex(void);
void start_parse_str(char *, int);
-void start_parse_fh(FILE *, int);
void end_parse(void);
#endif
YY_BUFFER_STATE buf = NULL; /* buffer to parse; it need for parse from string */
-int lrlimit = -1; /* for limiting read from filehandle ( -1 - unlimited read ) */
-int bytestoread = 0; /* for limiting read from filehandle */
-
-/* redefine macro for read limited length */
-#define YY_INPUT(buf,result,max_size) \
- if ( yy_current_buffer->yy_is_interactive ) { \
- int c = '*', n; \
- for ( n = 0; n < max_size && \
- (c = getc( tsearch_yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( tsearch_yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } else { \
- if ( lrlimit == 0 ) \
- result=YY_NULL; \
- else { \
- if ( lrlimit>0 ) { \
- bytestoread = ( lrlimit > max_size ) ? max_size : lrlimit; \
- lrlimit -= bytestoread; \
- } else \
- bytestoread = max_size; \
- if ( ((result = fread( buf, 1, bytestoread, tsearch_yyin )) == 0) \
- && ferror( tsearch_yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- } \
- }
-
%}
%option 8bit
BEGIN INITIAL;
}
-/* start parse from filehandle */
-void start_parse_fh( FILE* fh, int limit ) {
- if (buf) end_parse();
- lrlimit = ( limit ) ? limit : -1;
- buf = tsearch_yy_create_buffer( fh, YY_BUF_SIZE );
- tsearch_yy_switch_to_buffer( buf );
- BEGIN INITIAL;
-}
-
+# $Header: /cvsroot/pgsql/contrib/tsearch2/Makefile,v 1.3.2.1 2003/09/07 04:36:39 momjian Exp $
+
subdir = contrib/tsearch2
top_builddir = ../..
include $(top_builddir)/src/Makefile.global
-override CPPFLAGS := -I$(srcdir) -I$(srcdir)/snowball -I$(srcdir)/ispell -I$(srcdir)/wordparser $(CPPFLAGS)
-
MODULE_big = tsearch2
OBJS = dict_ex.o dict.o snmap.o stopword.o common.o prs_dcfg.o \
dict_snowball.o dict_ispell.o dict_syn.o \
$(SUBDIRS:%=%-recursive):
$(MAKE) -C $(subst -recursive,,$@) SUBSYS.o
+PG_CPPFLAGS = -I$(srcdir)/snowball -I$(srcdir)/ispell -I$(srcdir)/wordparser
+
+DATA = stopword/english.stop stopword/russian.stop
DATA_built = tsearch2.sql untsearch2.sql
DOCS = README.tsearch2
REGRESS = tsearch2
-EXTRA_CLEAN = tsearch2.sql.in
-
SHLIB_LINK := -lm
-include $(top_srcdir)/contrib/contrib-global.mk
-# DO NOT DELETE
-install: installstop
-
-installstop:
- cp $(srcdir)/stopword/*.stop $(datadir)
-
-
-tsearch2.sql.in: tsearch.sql._in
- sed 's,DATA_PATH,$(datadir),g' < $< > $@
+tsearch2.sql: tsearch.sql.in
+ sed -e 's,MODULE_PATHNAME,$$libdir/$(MODULE_big),g' \
+ -e 's,DATA_PATH,$(datadir)/contrib,g' $< >$@
untsearch2.sql: untsearch.sql.in
cp $< $@
+.PHONY: subclean
clean: subclean
subclean:
for dir in $(SUBDIRS); do $(MAKE) -C $$dir clean || exit; done
+include $(top_srcdir)/contrib/contrib-global.mk
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html><head><title>tsearch-v2-intro</title>
+
+<link type="text/css" rel="stylesheet" href="tsearch-V2-intro_files/tsearch.txt"></head>
-<html>
-<head>
- <title>tsearch-v2-intro</title>
-<link type="text/css" rel="stylesheet" href="/~megera/postgres/gist/tsearch/tsearch.css">
-</head>
<body>
<div class="content">
<h2>Tsearch2 - Introduction</h2>
- <p><a href=
- "http://www.sai.msu.su/~megera/postgres/gist/tsearch/V2/docs/tsearch-V2-intro.html">
+ <p><a href="http://www.sai.msu.su/%7Emegera/postgres/gist/tsearch/V2/docs/tsearch-V2-intro.html">
[Online version]</a> of this document is available.</p>
<p>The tsearch2 module is available to add as an extension to
<p>The README.tsearch2 file included in the contrib/tsearch2
directory contains a brief overview and history behind tsearch.
- This can also be found online <a href=
- "http://www.sai.msu.su/~megera/postgres/gist/tsearch/V2/">[right
+ This can also be found online <a href="http://www.sai.msu.su/%7Emegera/postgres/gist/tsearch/V2/">[right
here]</a>.</p>
<p>Further in depth documentation such as a full function
- reference, and user guide can be found online at the <a href=
- "http://www.sai.msu.su/~megera/postgres/gist/tsearch/V2/docs/">[tsearch
+ reference, and user guide can be found online at the <a href="http://www.sai.msu.su/%7Emegera/postgres/gist/tsearch/V2/docs/">[tsearch
documentation home]</a>.</p>
<h3>ACKNOWLEDGEMENTS</h3>
<p>Step one is to download the tsearch V2 module :</p>
- <p><a href=
- "http://www.sai.msu.su/~megera/postgres/gist/tsearch/V2/">[http://www.sai.msu.su/~megera/postgres/gist/tsearch/V2/]</a>
+ <p><a href="http://www.sai.msu.su/%7Emegera/postgres/gist/tsearch/V2/">[http://www.sai.msu.su/~megera/postgres/gist/tsearch/V2/]</a>
(check Development History for latest stable version !)</p>
- <pre>
- tar -zxvf tsearch-v2.tar.gz
+ <pre> tar -zxvf tsearch-v2.tar.gz
mv tsearch2 PGSQL_SRC/contrib/
cd PGSQL_SRC/contrib/tsearch2
</pre>
<p>Then continue with the regular building and installation
process</p>
- <pre>
- gmake
+ <pre> gmake
gmake install
gmake installcheck
</pre>
<p>That is pretty much all you have to do, unless of course you
get errors. However if you get those, you better go check with
- the mailing lists over at <a href=
- "http://www.postgresql.org">http://www.postgresql.org</a> or
- <a href=
- "http://openfts.sourceforge.net/">http://openfts.sourceforge.net/</a>
+ the mailing lists over at <a href="http://www.postgresql.org/">http://www.postgresql.org</a> or
+ <a href="http://openfts.sourceforge.net/">http://openfts.sourceforge.net/</a>
since its never failed for me.</p>
<p>The directory in the contib/ and the directory from the
<p>We should create a database to use as an example for the
remainder of this file. We can call the database "ftstest". You
can create it from the command line like this:</p>
- <pre>
- #createdb ftstest
+ <pre> #createdb ftstest
</pre>
<p>If you thought installation was easy, this next bit is even
easier. Change to the PGSQL_SRC/contrib/tsearch2 directory and
type:</p>
- <pre>
- psql ftstest < tsearch2.sql
+ <pre> psql ftstest < tsearch2.sql
</pre>
<p>The file "tsearch2.sql" holds all the wonderful little
pg_ts_cfgmap are added.</p>
<p>You can check out the tables if you like:</p>
- <pre>
- #psql ftstest
+ <pre> #psql ftstest
ftstest=# \d
List of relations
Schema | Name | Type | Owner
<p>The first thing we can do is try out some of the types that
are provided for us. Lets look at the tsvector type provided
for us:</p>
- <pre>
- SELECT 'Our first string used today'::tsvector;
+ <pre> SELECT 'Our first string used today'::tsvector;
tsvector
---------------------------------------
'Our' 'used' 'first' 'today' 'string'
<p>The results are the words used within our string. Notice
they are not in any particular order. The tsvector type returns
a string of space separated words.</p>
- <pre>
- SELECT 'Our first string used today first string'::tsvector;
+ <pre> SELECT 'Our first string used today first string'::tsvector;
tsvector
-----------------------------------------------
'Our' 'used' 'again' 'first' 'today' 'string'
by the tsearch2 module.</p>
<p>The function to_tsvector has 3 possible signatures:</p>
- <pre>
- to_tsvector(oid, text);
+ <pre> to_tsvector(oid, text);
to_tsvector(text, text);
to_tsvector(text);
</pre>
the searchable text is broken up into words (Stemming process).
Right now we will specify the 'default' configuration. See the
section on TSEARCH2 CONFIGURATION to learn more about this.</p>
- <pre>
- SELECT to_tsvector('default',
+ <pre> SELECT to_tsvector('default',
'Our first string used today first string');
to_tsvector
--------------------------------------------
<p>If you want to view the output of the tsvector fields
without their positions, you can do so with the function
"strip(tsvector)".</p>
- <pre>
- SELECT strip(to_tsvector('default',
+ <pre> SELECT strip(to_tsvector('default',
'Our first string used today first string'));
strip
--------------------------------
<p>If you wish to know the number of unique words returned in
the tsvector you can do so by using the function
"length(tsvector)"</p>
- <pre>
- SELECT length(to_tsvector('default',
+ <pre> SELECT length(to_tsvector('default',
'Our first string used today first string'));
length
--------
<p>Lets take a look at the function to_tsquery. It also has 3
signatures which follow the same rational as the to_tsvector
function:</p>
- <pre>
- to_tsquery(oid, text);
+ <pre> to_tsquery(oid, text);
to_tsquery(text, text);
to_tsquery(text);
</pre>
<p>Lets try using the function with a single word :</p>
- <pre>
- SELECT to_tsquery('default', 'word');
+ <pre> SELECT to_tsquery('default', 'word');
to_tsquery
-----------
'word'
<p>Lets attempt to use the function with a string of multiple
words:</p>
- <pre>
- SELECT to_tsquery('default', 'this is many words');
+ <pre> SELECT to_tsquery('default', 'this is many words');
ERROR: Syntax error
</pre>
"tsquery" used for searching a tsvector field. What we need to
do is search for one to many words with some kind of logic (for
now simple boolean).</p>
- <pre>
- SELECT to_tsquery('default', 'searching|sentence');
+ <pre> SELECT to_tsquery('default', 'searching|sentence');
to_tsquery
----------------------
'search' | 'sentenc'
<p>You can not use words defined as being a stop word in your
configuration. The function will not fail ... you will just get
no result, and a NOTICE like this:</p>
- <pre>
- SELECT to_tsquery('default', 'a|is&not|!the');
+ <pre> SELECT to_tsquery('default', 'a|is&not|!the');
NOTICE: Query contains only stopword(s)
or doesn't contain lexem(s), ignored
to_tsquery
<p>The next stage is to add a full text index to an existing
table. In this example we already have a table defined as
follows:</p>
- <pre>
- CREATE TABLE tblMessages
+ <pre> CREATE TABLE tblMessages
(
intIndex int4,
strTopic varchar(100),
test strings for a topic, and a message. here is some test data
I inserted. (yes I know it's completely useless stuff ;-) but
it will serve our purpose right now).</p>
- <pre>
- INSERT INTO tblMessages
+ <pre> INSERT INTO tblMessages
VALUES ('1', 'Testing Topic', 'Testing message data input');
INSERT INTO tblMessages
VALUES ('2', 'Movie', 'Breakfast at Tiffany\'s');
<p>The next stage is to create a special text index which we
will use for FTI, so we can search our table of messages for
words or a phrase. We do this using the SQL command:</p>
- <pre>
- ALTER TABLE tblMessages ADD idxFTI tsvector;
+ <pre> ALTER TABLE tblMessages ADD COLUMN idxFTI tsvector;
</pre>
<p>Note that unlike traditional indexes, this is actually a new
<p>The general rule for the initial insertion of data will
follow four steps:</p>
- <pre>
- 1. update table
+ <pre> 1. update table
2. vacuum full analyze
3. create index
4. vacuum full analyze
the index has been created on the table, vacuum full analyze is
run again to update postgres's statistics (ie having the index
take effect).</p>
- <pre>
- UPDATE tblMessages SET idxFTI=to_tsvector('default', strMessage);
+ <pre> UPDATE tblMessages SET idxFTI=to_tsvector('default', strMessage);
VACUUM FULL ANALYZE;
</pre>
information stored, you should instead do the following, which
effectively concatenates the two fields into one before being
inserted into the table:</p>
- <pre>
- UPDATE tblMessages
+ <pre> UPDATE tblMessages
SET idxFTI=to_tsvector('default',coalesce(strTopic,'') ||' '|| coalesce(strMessage,''));
VACUUM FULL ANALYZE;
</pre>
Full Text INDEXINGi ;-)), so don't worry about any indexing
overhead. We will create an index based on the gist function.
GiST is an index structure for Generalized Search Tree.</p>
- <pre>
- CREATE INDEX idxFTI_idx ON tblMessages USING gist(idxFTI);
+ <pre> CREATE INDEX idxFTI_idx ON tblMessages USING gist(idxFTI);
VACUUM FULL ANALYZE;
</pre>
<p>The last thing to do is set up a trigger so every time a row
in this table is changed, the text index is automatically
updated. This is easily done using:</p>
- <pre>
- CREATE TRIGGER tsvectorupdate BEFORE UPDATE OR INSERT ON tblMessages
+ <pre> CREATE TRIGGER tsvectorupdate BEFORE UPDATE OR INSERT ON tblMessages
FOR EACH ROW EXECUTE PROCEDURE tsearch2(idxFTI, strMessage);
</pre>
<p>Or if you are indexing both strMessage and strTopic you
should instead do:</p>
- <pre>
- CREATE TRIGGER tsvectorupdate BEFORE UPDATE OR INSERT ON tblMessages
+ <pre> CREATE TRIGGER tsvectorupdate BEFORE UPDATE OR INSERT ON tblMessages
FOR EACH ROW EXECUTE PROCEDURE
tsearch2(idxFTI, strTopic, strMessage);
</pre>
the tsearch2 function. Lets say we want to create a function to
remove certain characters (like the @ symbol from all
text).</p>
- <pre>
- CREATE FUNCTION dropatsymbol(text)
+ <pre> CREATE FUNCTION dropatsymbol(text)
RETURNS text AS 'select replace($1, \'@\', \' \');' LANGUAGE SQL;
</pre>
<p>Now we can use this function within the tsearch2 function on
the trigger.</p>
- <pre>
- DROP TRIGGER tsvectorupdate ON tblmessages;
+ <pre> DROP TRIGGER tsvectorupdate ON tblmessages;
CREATE TRIGGER tsvectorupdate BEFORE UPDATE OR INSERT ON tblMessages
FOR EACH ROW EXECUTE PROCEDURE tsearch2(idxFTI, dropatsymbol, strMessage);
INSERT INTO tblmessages VALUES (69, 'Attempt for dropatsymbol', '
[email protected]');
locale of the server. All you have to do is change your default
configuration, or add a new one for your specific locale. See
the section on TSEARCH2 CONFIGURATION.</p>
- <pre class="real">
- SELECT * FROM tblmessages WHERE intindex = 69;
+ <pre class="real"> SELECT * FROM tblmessages WHERE intindex = 69;
intindex | strtopic | strmessage | idxfti
----------+--------------------------+---------------+-----------------------
<p>Lets search the indexed data for the word "Test". I indexed
based on the the concatenation of the strTopic, and the
strMessage:</p>
- <pre>
- SELECT intindex, strtopic FROM tblmessages
+ <pre> SELECT intindex, strtopic FROM tblmessages
WHERE idxfti @@ 'test'::tsquery;
intindex | strtopic
----------+---------------
"Testing Topic". Notice that the word I search for was all
lowercase. Let's see what happens when I query for uppercase
"Test".</p>
- <pre>
- SELECT intindex, strtopic FROM tblmessages
+ <pre> SELECT intindex, strtopic FROM tblmessages
WHERE idxfti @@ 'Test'::tsquery;
intindex | strtopic
----------+----------
<p>Most likely the best way to query the field is to use the
to_tsquery function on the right hand side of the @@ operator
like this:</p>
- <pre>
- SELECT intindex, strtopic FROM tblmessages
+ <pre> SELECT intindex, strtopic FROM tblmessages
WHERE idxfti @@ to_tsquery('default', 'Test | Zeppelin');
intindex | strtopic
----------+--------------------
a way around which doesn't appear to have a significant impact
on query time, and that is to use a query such as the
following:</p>
- <pre>
- SELECT intindex, strTopic FROM tblmessages
+ <pre> SELECT intindex, strTopic FROM tblmessages
WHERE idxfti @@ to_tsquery('default', 'gettysburg & address')
AND strMessage ~* '.*men are created equal.*';
intindex | strtopic
english stemming. We could edit the file
:'/usr/local/pgsql/share/english.stop' and add a word to the
list. I edited mine to exclude my name from indexing:</p>
- <pre>
- - Edit /usr/local/pgsql/share/english.stop
+ <pre> - Edit /usr/local/pgsql/share/english.stop
- Add 'andy' to the list
- Save the file.
</pre>
connected to the DB while editing the stop words, you will need
to end the current session and re-connect. When you re-connect
to the database, 'andy' is no longer indexed:</p>
- <pre>
- SELECT to_tsvector('default', 'Andy');
+ <pre> SELECT to_tsvector('default', 'Andy');
to_tsvector
------------
(1 row)
</pre>
<p>Originally I would get the result :</p>
- <pre>
- SELECT to_tsvector('default', 'Andy');
+ <pre> SELECT to_tsvector('default', 'Andy');
to_tsvector
------------
'andi':1
'simple', the results would be different. There are no stop
words for the simple dictionary. It will just convert to lower
case, and index every unique word.</p>
- <pre>
- SELECT to_tsvector('simple', 'Andy andy The the in out');
+ <pre> SELECT to_tsvector('simple', 'Andy andy The the in out');
to_tsvector
-------------------------------------
'in':5 'out':6 'the':3,4 'andy':1,2
into the actual configuration of tsearch2. In the examples in
this document the configuration has always been specified when
using the tsearch2 functions:</p>
- <pre>
- SELECT to_tsvector('default', 'Testing the default config');
+ <pre> SELECT to_tsvector('default', 'Testing the default config');
SELECT to_tsvector('simple', 'Example of simple Config');
</pre>
contains both the 'default' configurations based on the 'C'
locale. And the 'simple' configuration which is not based on
any locale.</p>
- <pre>
- SELECT * from pg_ts_cfg;
+ <pre> SELECT * from pg_ts_cfg;
ts_name | prs_name | locale
-----------------+----------+--------------
default | default | C
configuration or just use one that already exists. If I do not
specify which configuration to use in the to_tsvector function,
I receive the following error.</p>
- <pre>
- SELECT to_tsvector('learning tsearch is like going to school');
+ <pre> SELECT to_tsvector('learning tsearch is like going to school');
ERROR: Can't find tsearch config by locale
</pre>
into the pg_ts_cfg table. We will call the configuration
'default_english', with the default parser and use the locale
'en_US'.</p>
- <pre>
- INSERT INTO pg_ts_cfg (ts_name, prs_name, locale)
+ <pre> INSERT INTO pg_ts_cfg (ts_name, prs_name, locale)
VALUES ('default_english', 'default', 'en_US');
</pre>
tsearch2.sql</p>
<p>Lets take a first look at the pg_ts_dict table</p>
- <pre>
- ftstest=# \d pg_ts_dict
+ <pre> ftstest=# \d pg_ts_dict
Table "public.pg_ts_dict"
Column | Type | Modifiers
-----------------+---------+-----------
dict_name | text | not null
dict_init | oid |
dict_initoption | text |
- dict_lemmatize | oid | not null
+ dict_lexize | oid | not null
dict_comment | text |
Indexes: pg_ts_dict_idx unique btree (dict_name)
</pre>
ISpell. We will assume you have ISpell installed on you
machine. (in /usr/local/lib)</p>
- <p>First lets register the dictionary(ies) to use from ISpell.
- We will use the english dictionary from ISpell. We insert the
- paths to the relevant ISpell dictionary (*.hash) and affixes
- (*.aff) files. There seems to be some question as to which
- ISpell files are to be used. I installed ISpell from the latest
- sources on my computer. The installation installed the
- dictionary files with an extension of *.hash. Some
- installations install with an extension of *.dict As far as I
- know the two extensions are equivilant. So *.hash ==
- *.dict.</p>
-
- <p>We will also continue to use the english word stop file that
+ <p>There has been some confusion in the past as to which files
+ are used from ISpell. ISpell operates using a hash file. This
+ is a binary file created by the ISpell command line utility
+ "buildhash". This utility accepts a file containing the words
+ from the dictionary, and the affixes file and the output is the
+ hash file. The default installation of ISPell installs the
+ english hash file english.hash, which is the exact same file as
+ american.hash. ISpell uses this as the fallback dictionary to
+ use.</p>
+
+ <p>This hash file is not what tsearch2 requires as the ISpell
+ interface. The file(s) needed are those used to create the
+ hash. Tsearch uses the dictionary words for morphology, so the
+ listing is needed not spellchecking. Regardless, these files
+ are included in the ISpell sources, and you can use them to
+ integrate into tsearch2. This is not complicated, but is not
+ very obvious to begin with. The tsearch2 ISpell interface needs
+ only the listing of dictionary words, it will parse and load
+ those words, and use the ISpell dictionary for lexem
+ processing.</p>
+
+ <p>I found the ISPell make system to be very finicky. Their
+ documentation actually states this to be the case. So I just
+ did things the command line way. In the ISpell source tree
+ under langauges/english there are several files in this
+ directory. For a complete description, please read the ISpell
+ README. Basically for the english dictionary there is the
+ option to create the small, medium, large and extra large
+ dictionaries. The medium dictionary is recommended. If the make
+ system is configured correctly, it would build and install the
+ english.has file from the medium size dictionary. Since we are
+ only concerned with the dictionary word listing ... it can be
+ created from the /languages/english directory with the
+ following command:</p>
+ <pre> sort -u -t/ +0f -1 +0 -T /usr/tmp -o english.med english.0 english.1
+</pre>
+
+ <p>This will create a file called english.med. You can copy
+ this file to whever you like. I place mine in /usr/local/lib so
+ it coincides with the ISpell hash files. You can now add the
+ tsearch2 configuration entry for the ISpell english dictionary.
+ We will also continue to use the english word stop file that
was installed for the en_stem dictionary. You could use a
different one if you like. The ISpell configuration is based on
the "ispell_template" dictionary installed by default with
tsearch2. We will use the OIDs to the stored procedures from
the row where the dict_name = 'ispell_template'.</p>
- <pre>
- INSERT INTO pg_ts_dict
+ <pre> INSERT INTO pg_ts_dict
(SELECT 'en_ispell',
dict_init,
- 'DictFile="/usr/local/lib/english.hash",'
+ 'DictFile="/usr/local/lib/english.med",'
'AffFile="/usr/local/lib/english.aff",'
'StopFile="/usr/local/pgsql/share/english.stop"',
dict_lexize
WHERE dict_name = 'ispell_template');
</pre>
+ <p>Now that we have a dictionary we can specify it's use in a
+ query to get a lexem. For this we will use the lexize function.
+ The lexize function takes the name of the dictionary to use as
+ an argument. Just as the other tsearch2 functions operate.</p>
+ <pre> SELECT lexize('en_ispell', 'program');
+ lexize
+ -----------
+ {program}
+ (1 row)
+</pre>
+
+ <p>If you wanted to always use the ISpell english dictionary
+ you have installed, you can configure tsearch2 to always use a
+ specific dictionary.</p>
+ <pre> SELCECT set_curdict('en_ispell');
+</pre>
+
+ <p>Lexize is meant to turn a word into a lexem. It is possible
+ to receive more than one lexem returned for a single word.</p>
+ <pre> SELECT lexize('en_ispell', 'conditionally');
+ lexize
+ -----------------------------
+ {conditionally,conditional}
+ (1 row)
+</pre>
+
+ <p>The lexize function is not meant to take a full string as an
+ argument to return lexems for. If you passed in an entire
+ sentence, it attempts to find that entire sentence in the
+ dictionary. SInce the dictionary contains only words, you will
+ receive an empty result set back.</p>
+ <pre> SELECT lexize('en_ispell', 'This is a senctece to lexize');
+ lexize
+ --------
+
+ (1 row)
+
+If you parse a lexem from a word not in the dictionary, then you will receive an empty result. This makes sense because the word "tsearch" is not int the english dictionary. You can create your own additions to the dictionary if you like. This may be useful for scientific or technical glossaries that need to be indexed. SELECT lexize('en_ispell', 'tsearch'); lexize -------- (1 row)
+</pre>
+
+ <p>This is not to say that tsearch will be ignored when adding
+ text information to the the tsvector index column. This will be
+ explained in greater detail with the table pg_ts_cfgmap.</p>
+
<p>Next we need to set up the configuration for mapping the
dictionay use to the lexxem parsings. This will be done by
altering the pg_ts_cfgmap table. We will insert several rows,
configured for use within tsearch2. There are several type of
lexims we would be concerned with forcing the use of the ISpell
dictionary.</p>
- <pre>
- INSERT INTO pg_ts_cfgmap (ts_name, tok_alias, dict_name)
+ <pre> INSERT INTO pg_ts_cfgmap (ts_name, tok_alias, dict_name)
VALUES ('default_english', 'lhword', '{en_ispell,en_stem}');
INSERT INTO pg_ts_cfgmap (ts_name, tok_alias, dict_name)
VALUES ('default_english', 'lpart_hword', '{en_ispell,en_stem}');
<p>There are several other lexem types used that we do not need
to specify as using the ISpell dictionary. We can simply insert
values using the 'simple' stemming process dictionary.</p>
- <pre>
- INSERT INTO pg_ts_cfgmap
+ <pre> INSERT INTO pg_ts_cfgmap
VALUES ('default_english', 'url', '{simple}');
INSERT INTO pg_ts_cfgmap
VALUES ('default_english', 'host', '{simple}');
complete. We have successfully created a new tsearch2
configuration. At the same time we have also set the new
configuration to be our default for en_US locale.</p>
- <pre>
- SELECT to_tsvector('default_english',
+ <pre> SELECT to_tsvector('default_english',
'learning tsearch is like going to school');
to_tsvector
--------------------------------------------------
(1 row)
</pre>
+ <p>Notice here that words like "tsearch" are still parsed and
+ indexed in the tsvector column. There is a lexem returned for
+ the word becuase in the configuration mapping table, we specify
+ words to be used from the 'en_ispell' dictionary first, but as
+ a fallback to use the 'en_stem' dictionary. Therefore a lexem
+ is not returned from en_ispell, but is returned from en_stem,
+ and added to the tsvector.</p>
+ <pre> SELECT to_tsvector('learning tsearch is like going to computer school');
+ to_tsvector
+ ---------------------------------------------------------------------------
+ 'go':5 'like':4 'learn':1 'school':8 'compute':7 'tsearch':2 'computer':7
+ (1 row)
+</pre>
+
+ <p>Notice in this last example I added the word "computer" to
+ the text to be converted into a tsvector. Because we have setup
+ our default configuration to use the ISpell english dictionary,
+ the words are lexized, and computer returns 2 lexems at the
+ same position. 'compute':7 and 'computer':7 are now both
+ indexed for the word computer.</p>
+
+ <p>You can create additional dictionarynlists, or use the extra
+ large dictionary from ISpell. You can read through the ISpell
+ documents, and source tree to make modifications as you see
+ fit.</p>
+
<p>In the case that you already have a configuration set for
the locale, and you are changing it to your new dictionary
configuration. You will have to set the old locale to NULL. If
we are using the 'C' locale then we would do this:</p>
- <pre>
- UPDATE pg_ts_cfg SET locale=NULL WHERE locale = 'C';
+ <pre> UPDATE pg_ts_cfg SET locale=NULL WHERE locale = 'C';
</pre>
<p>That about wraps up the configuration of tsearch2. There is
<p>1) Backup any global database objects such as users and
groups (this step is usually only necessary when you will be
restoring to a virgin system)</p>
- <pre>
- pg_dumpall -g > GLOBALobjects.sql
+ <pre> pg_dumpall -g > GLOBALobjects.sql
</pre>
<p>2) Backup the full database schema using pg_dump</p>
- <pre>
- pg_dump -s DATABASE > DATABASEschema.sql
+ <pre> pg_dump -s DATABASE > DATABASEschema.sql
</pre>
<p>3) Backup the full database using pg_dump</p>
- <pre>
- pg_dump -Fc DATABASE > DATABASEdata.tar
+ <pre> pg_dump -Fc DATABASE > DATABASEdata.tar
</pre>
<p>To Restore a PostgreSQL database that uses the tsearch2
module:</p>
<p>1) Create the blank database</p>
- <pre>
- createdb DATABASE
+ <pre> createdb DATABASE
</pre>
<p>2) Restore any global database objects such as users and
groups (this step is usually only necessary when you will be
restoring to a virgin system)</p>
- <pre>
- psql DATABASE < GLOBALobjects.sql
+ <pre> psql DATABASE < GLOBALobjects.sql
</pre>
<p>3) Create the tsearch2 objects, functions and operators</p>
- <pre>
- psql DATABASE < tsearch2.sql
+ <pre> psql DATABASE < tsearch2.sql
</pre>
<p>4) Edit the backed up database schema and delete all SQL
tsvector types. If your not sure what these are, they are the
ones listed in tsearch2.sql. Then restore the edited schema to
the database</p>
- <pre>
- psql DATABASE < DATABASEschema.sql
+ <pre> psql DATABASE < DATABASEschema.sql
</pre>
<p>5) Restore the data for the database</p>
- <pre>
- pg_restore -N -a -d DATABASE DATABASEdata.tar
+ <pre> pg_restore -N -a -d DATABASE DATABASEdata.tar
</pre>
<p>If you get any errors in step 4, it will most likely be
tsearch2.sql. Any errors in step 5 will mean the database
schema was probably restored wrongly.</p>
</div>
-</body>
-</html>
+</body></html>
\ No newline at end of file
'wether':CD & 'sky':BC
(1 row)
+select to_tsquery('asd&(and|fghj)');
+ to_tsquery
+----------------
+ 'asd' & 'fghj'
+(1 row)
+
+select to_tsquery('(asd&and)|fghj');
+ to_tsquery
+----------------
+ 'asd' | 'fghj'
+(1 row)
+
+select to_tsquery('(asd&!and)|fghj');
+ to_tsquery
+----------------
+ 'asd' | 'fghj'
+(1 row)
+
+select to_tsquery('(the|and&(i&1))&fghj');
+ to_tsquery
+--------------
+ '1' & 'fghj'
+(1 row)
+
select 'a b:89 ca:23A,64b d:34c'::tsvector @@ 'd:AC & ca';
?column?
----------
+# $Header: /cvsroot/pgsql/contrib/tsearch2/ispell/Attic/Makefile,v 1.3.2.1 2003/09/07 04:36:39 momjian Exp $
+
subdir = contrib/tsearch2/ispell
top_builddir = ../../..
include $(top_builddir)/src/Makefile.global
-override CPPFLAGS := -I$(srcdir) -I$(srcdir)/.. $(CPPFLAGS)
+PG_CPPFLAGS = -I$(srcdir)/.. $(CPPFLAGS)
override CFLAGS += $(CFLAGS_SL)
SUBOBJS = spell.o
EXTRA_CLEAN = SUBSYS.o $(SUBOBJS)
include $(top_srcdir)/contrib/contrib-global.mk
-# DO NOT DELETE
-
-
PG_FUNCTION_INFO_V1(to_tsquery_current);
Datum to_tsquery_current(PG_FUNCTION_ARGS);
-#define END 0
-#define ERR 1
-#define VAL 2
-#define OPR 3
-#define OPEN 4
-#define CLOSE 5
-#define VALTRUE 6 /* for stop words */
-#define VALFALSE 7
-
/* parser's states */
#define WAITOPERAND 1
#define WAITOPERATOR 2
/* XXX */
if (prs.curwords == 0)
- pushval_asis(state, VALTRUE, 0, 0, 0);
+ pushval_asis(state, VALSTOP, 0, 0, 0);
}
#define STACKDEPTH 32
elog(DEBUG3, (ptr[*pos].type == OPR) ?
"%d %c" : "%d %d", *pos, ptr[*pos].val);
#endif
- if (ptr[*pos].type == VAL || ptr[*pos].type == VALTRUE)
+ if (ptr[*pos].type == VAL || ptr[*pos].type == VALSTOP)
{
ptr[*pos].left = 0;
(*pos)++;
#define OPR 3
#define OPEN 4
#define CLOSE 5
-#define VALTRUE 6 /* for stop words */
-#define VALFALSE 7
+#define VALSTOP 6 /* for stop words */
bool TS_execute(ITEM * curitem, void *checkval,
bool calcnot, bool (*chkcond) (void *checkval, ITEM * val));
#define V_UNKNOWN 0
#define V_TRUE 1
#define V_FALSE 2
+#define V_STOP 3
/*
* Clean query tree from values which is always in
if (node->valnode->type == VAL)
return node;
- else if (node->valnode->type == VALTRUE)
+ else if (node->valnode->type == VALSTOP)
{
pfree(node);
- *result = V_TRUE;
+ *result = V_STOP;
return NULL;
}
node->right = clean_fakeval_intree(node->right, &rresult);
if (!node->right)
{
- *result = (rresult == V_TRUE) ? V_FALSE : V_TRUE;
+ *result = V_STOP;
freetree(node);
return NULL;
}
}
- else if (node->valnode->val == (int4) '|')
- {
- NODE *res = node;
-
- node->left = clean_fakeval_intree(node->left, &lresult);
- node->right = clean_fakeval_intree(node->right, &rresult);
- if (lresult == V_TRUE || rresult == V_TRUE)
- {
- freetree(node);
- *result = V_TRUE;
- return NULL;
- }
- else if (lresult == V_FALSE && rresult == V_FALSE)
- {
- freetree(node);
- *result = V_FALSE;
- return NULL;
- }
- else if (lresult == V_FALSE)
- {
- res = node->right;
- pfree(node);
- }
- else if (rresult == V_FALSE)
- {
- res = node->left;
- pfree(node);
- }
- return res;
- }
else
{
NODE *res = node;
node->left = clean_fakeval_intree(node->left, &lresult);
node->right = clean_fakeval_intree(node->right, &rresult);
- if (lresult == V_FALSE || rresult == V_FALSE)
- {
- freetree(node);
- *result = V_FALSE;
- return NULL;
- }
- else if (lresult == V_TRUE && rresult == V_TRUE)
+ if (lresult == V_STOP && rresult == V_STOP)
{
freetree(node);
- *result = V_TRUE;
+ *result = V_STOP;
return NULL;
}
- else if (lresult == V_TRUE)
+ else if (lresult == V_STOP)
{
res = node->right;
pfree(node);
}
- else if (rresult == V_TRUE)
+ else if (rresult == V_STOP)
{
res = node->left;
pfree(node);
+# $Header: /cvsroot/pgsql/contrib/tsearch2/snowball/Attic/Makefile,v 1.3.2.1 2003/09/07 04:36:39 momjian Exp $
+
subdir = contrib/tsearch2/snowball
top_builddir = ../../..
include $(top_builddir)/src/Makefile.global
-override CPPFLAGS := -I$(srcdir) -I$(srcdir)/.. $(CPPFLAGS)
+PG_CPPFLAGS = -I$(srcdir)/..
override CFLAGS += $(CFLAGS_SL)
SUBOBJS = english_stem.o api.o russian_stem.o utilities.o
EXTRA_CLEAN = SUBSYS.o $(SUBOBJS)
include $(top_srcdir)/contrib/contrib-global.mk
-# DO NOT DELETE
-
-
select to_tsquery('default', 'qwe & sKies ');
select to_tsquery('simple', 'qwe & sKies ');
select to_tsquery('default', '\'the wether\':dc & \' sKies \':BC ');
+select to_tsquery('asd&(and|fghj)');
+select to_tsquery('(asd&and)|fghj');
+select to_tsquery('(asd&!and)|fghj');
+select to_tsquery('(the|and&(i&1))&fghj');
select 'a b:89 ca:23A,64b d:34c'::tsvector @@ 'd:AC & ca';
select 'a b:89 ca:23A,64b d:34c'::tsvector @@ 'd:AC & ca:B';
select 'a b:89 ca:23A,64b d:34c'::tsvector @@ 'd:AC & ca:A';
+# $Header: /cvsroot/pgsql/contrib/tsearch2/wordparser/Attic/Makefile,v 1.3.2.1 2003/09/07 04:36:39 momjian Exp $
+
subdir = contrib/tsearch2/wordparser
top_builddir = ../../..
include $(top_builddir)/src/Makefile.global
-override CPPFLAGS := -I$(srcdir) -I$(srcdir)/.. $(CPPFLAGS)
+PG_CPPFLAGS = -I$(srcdir)/..
override CFLAGS += $(CFLAGS_SL)
SUBOBJS = parser.o deflex.o
EXTRA_CLEAN = SUBSYS.o $(SUBOBJS) parser.c
include $(top_srcdir)/contrib/contrib-global.mk
-# DO NOT DELETE
-
-
int tokenlen;
int tsearch2_yylex(void);
void start_parse_str(char *, int);
-void start_parse_fh(FILE *, int);
void end_parse(void);
#endif
YY_BUFFER_STATE buf = NULL; /* buffer to parse; it need for parse from string */
-int lrlimit = -1; /* for limiting read from filehandle ( -1 - unlimited read ) */
-int bytestoread = 0; /* for limiting read from filehandle */
-
-/* redefine macro for read limited length */
-#define YY_INPUT(buf,result,max_size) \
- if ( yy_current_buffer->yy_is_interactive ) { \
- int c = '*', n; \
- for ( n = 0; n < max_size && \
- (c = getc( tsearch2_yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( tsearch2_yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } else { \
- if ( lrlimit == 0 ) \
- result=YY_NULL; \
- else { \
- if ( lrlimit>0 ) { \
- bytestoread = ( lrlimit > max_size ) ? max_size : lrlimit; \
- lrlimit -= bytestoread; \
- } else \
- bytestoread = max_size; \
- if ( ((result = fread( buf, 1, bytestoread, tsearch2_yyin )) == 0) \
- && ferror( tsearch2_yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- } \
- }
-
%}
%option 8bit
BEGIN INITIAL;
}
-/* start parse from filehandle */
-void start_parse_fh( FILE* fh, int limit ) {
- if (buf) end_parse();
- lrlimit = ( limit ) ? limit : -1;
- buf = tsearch2_yy_create_buffer( fh, YY_BUF_SIZE );
- tsearch2_yy_switch_to_buffer( buf );
- BEGIN INITIAL;
-}
Frequently Asked Questions (FAQ) for PostgreSQL
- Last updated: Fri Jul 25 18:07:30 EDT 2003
+ Last updated: Fri Sep 5 12:42:57 EDT 2003
A native port to MS Win NT/2000/XP is currently being worked on. For
more details on the current status of PostgreSQL on Windows see
- http://techdocs.postgresql.org/guides/Windows.
+ http://techdocs.postgresql.org/guides/Windows and
+ http://candle.pha.pa.us/main/writings/pgsql/win32.html.
There is also a Novell Netware 6 port at http://forge.novell.com.
Finally, you could use the OID returned from the INSERT statement to
look up the default value, though this is probably the least portable
- approach. In Perl, using DBI with Edmund Mergl's DBD::Pg module, the
+ approach, and the oid value will wrap around when it reaches 4
+ billion. In Perl, using DBI with Edmund Mergl's DBD::Pg module, the
oid value is made available via $sth->{pg_oid_status} after
$sth->execute().
- Letzte Aktualisierung der deutschen Übersetzung: Di., den 22.07.2003,
- 16:20 CET
+ Letzte Aktualisierung der deutschen Übersetzung: Di., den 02.09.2003,
+ 10:00 CET
Die aktuellste Version dieses Dokuments liegt auf der PostgreSQL
Website:
Schließlich besteht noch die Möglichkeit, den von einer
INSERT-Anweisung zurückgelieferten OID-Wert als einmaligen Wert zu
- verwenden. In Perl mit dem DBD::Pg-Modul von Edmund Mergl wird der
- OID-Wert nach einem $sth->excute() über $sth->{pg_oid_status}
- zurückgeliefert.
+ verwenden. Dieser Ansatz ist allerdings PostgreSQL-spezifisch;
+ außerdem wird nach ca. 4 Milliarden Einträgen der OID-Wert wieder auf
+ eine kleine Zahl gesetzt, ist also nicht garantiert einmalig.
+
+ In Perl mit dem DBD::Pg-Modul wird der OID-Wert nach einem
+ $sth->excute() über $sth->{pg_oid_status} zurückgeliefert.
4.15.3) Führen currval() und nextval() zu einer Race-Condition mit anderen
Nutzern?
4.28) Welche Möglichkeiten zur Verschlüsselung gibt es?
* contrib/pgcrypto enthält diverse Funktionen für die Benützung mit
- SQL-Abfragen;
- * die einzige Möglichkeit, Kommunikationen zwischen Client und
- Server zu verschlüsseln, ist durch die Anwendung von hostssl in
- pg_hba.conf;
+ SQL-Abfragen.
+ * Um Verbindungen zwischen dem Server und Client-Anwendungen zu
+ verschlüsseln, muss in der Server-Konfigurationsdatei
+ postgresql.conf die ssl-Option auf true (Voreinstellung: false)
+ gesetzt werden und ein passender host- bzw. hostssl-Eintrag muss
+ in pg_hba.conf vorhanden sein. Zudem muss die sslmode-Einstellung
+ beim Client nicht auf disable gesetzt werden. (Bitte beachten Sie
+ auch, daß neben der eingebauten SSL-Unterstützung verschlüsselte
+ Verbindungen auch über externe Anwendungen wie stunnel oder ssh
+ aufgebaut werden können).
* Die Passwörter der Datenbanknutzer werden ab Version 7.3
automatisch verschlüsselt (in früheren Versionen muß der Parameter
PASSWORD_ENCRYPTION in postgresql.conf explizit eingeschaltet
- werden);
- * der Server läuft auf einem verschlüsselten Dateisystem.
+ werden).
+ * Betrieb des Servers auf einem verschlüsselten Dateisystem.
_________________________________________________________________
PostgreSQL erweitern
Die englische Vorlage dieser FAQ wird ständig überarbeitet. Daher
liegt die Übersetzung nicht immer auf dem aktuellsten Stand.
+ Die aktuellste Version der deutschen Übersetzung befindet sich immer
+ unter http://sql-info.de/postgresql/FAQ_german.html. Diese
+ "Arbeitsversion" enthält eventuell Änderungen, die noch nicht auf der
+ PostgreSQL-Website eingebunden worden sind.
+
Über Verbesserungshinweise und Korrekturvorschläge sowie
Verständnisfragen zum Inhalt der FAQ freue ich mich. Ich nehme auch
- allgemeine Fragen zu PostgreSQL gerne entgegen, kann aber leider keine
- zeitige Antwort garantieren.
+ allgemeine Fragen zu PostgreSQL gerne entgegen, verweise jedoch auf
+ die Mailing-Listen als schnelle und zuverlässige Anlaufstellen.
Diese Übersetzung basiert teilweise auf einer früheren Übersetzung von
TODO list for PostgreSQL
========================
-Last updated: Tue Aug 12 18:04:15 EDT 2003
+Last updated: Fri Sep 5 15:52:01 EDT 2003
* Allow configuration files to be specified in a different directory
* -Add start time to pg_stat_activity
* Allow limits on per-db/user connections
-* Have standalone backend read postgresql.conf
+* -Have standalone backend read postgresql.conf (Tom)
* Add group object ownership, so groups can rename/drop/grant on objects,
so we can implement roles
* Add the concept of dataspaces/tablespaces [tablespaces]
* Allow server log information to be output as INSERT statements
* Prevent default re-use of sysids for dropped users and groups
* Prevent dropping user that still owns objects, or auto-drop the objects
+* Allow pooled connections to query prepared queries
+* Allow pooled connections to close all open WITH HOLD cursors
from making invalid dates valid
* -Prevent month/day swapping of ISO dates to make invalid dates valid
* Have initdb set DateStyle based on locale?
+* Add pg_get_acldef(), pg_get_typedefault(), and pg_get_attrdef()
+* Add ALTER DOMAIN, AGGREGATE, CONVERSION, SEQUENCE ... OWNER TO
+* Allow to_char to print localized month names (Karel)
+
* ARRAYS
o Allow nulls in arrays
* Prevent mismatch of frontend/backend encodings from converting bytea
data from being interpreted as encoded strings
* -Remove Cyrillic recode support
+* Fix upper()/lower() to work for multibyte encodings
+
Views / Rules
INSERT INTO inherit_table (unique_index_col) VALUES (dup) should fail
[inheritance]
* Add UNIQUE capability to non-btree indexes
-* Add btree index support for reltime, tinterval, regproc
+* -Add btree index support for reltime, tinterval, regproc (Tom)
* Add rtree index support for line, lseg, path, point
* -Certain indexes will not shrink, e.g. indexes on ever-increasing
columns and indexes with many duplicate keys
float4, numeric/decimal too [optimizer]
* Add FILLFACTOR to btree index creation
* Add concurrency to GIST
-* Improve concurrency of hash indexes (Neil)
+* -Improve concurrency of hash indexes (Tom)
* Allow a single index to index multiple tables (for inheritance and subtables)
* -Have SELECT '13 minutes'::interval display zero seconds in ISO datestyle
* Prevent COMMENT ON DATABASE from using a database name
* Add GUC variable to prevent waiting on locks
+* Allow TRUNCATE ... CASCADE/RESTRICT
+* Allow PREPARE of cursors
* ALTER
o Allow ALTER TABLE to modify column lengths and change to binary
compatible types
o Add ALTER DATABASE ... OWNER TO newowner
+ o Allow ALTER TABLE ... ALTER CONSTRAINT ... RENAME
* CLUSTER
o Automatically maintain clustering on a table
* -Allow psql to show transaction status if backend protocol changes made
* -Add schema, cast, and conversion backslash commands to psql (Christopher)
* -Allow pg_dump to dump a specific schema (Neil Conway)
-* Allow psql to do table completion for SELECT * FROM schema_part and
+* -Allow psql to do table completion for SELECT * FROM schema_part and
table completion for SELECT * FROM schema_name.
* Add XML capability to pg_dump and COPY, when backend XML capability
* -Allow SSL-enabled clients to turn off SSL transfers
* Allow psql \du to show groups, and add \dg for groups
* Allow clients to query WITH HOLD cursors and prepared statements
* Prevent unneeded quoting in psql \d output using fmtId()
+* Add a libpq function to support Parse/DescribeStatement capability
* JDBC
* Support triggers on columns (Neil)
* Have AFTER triggers execute after the appropriate SQL statement in a
function, not at the end of the function
-
+* Print table names with constraint names in error messages, or make constraint
+ names unique within a schema
Dependency Checking
===================
* Provide automatic running of vacuum in the background in backend
rather than in /contrib [vacuum]
* Allow free space map to be auto-sized or warn when it is too small
+* Maintain a map of recently-expired of pages so vacuum can reclaim
+ free space without a sequential scan
Locking
* Acquire lock on a relation before building a relcache entry for it
* Research interaction of setitimer() and sleep() used by statement_timeout
* Add checks for fclose() failure
-* Change CVS $Id: TODO,v 1.1115 2003/08/13 03:12:04 momjian Exp $ to $PostgreSQL: pgsql/doc/TODO,v 1.1115 2003/08/13 03:12:04 momjian Exp $
+* Change CVS $Id: TODO,v 1.1115.2.1 2003/09/07 04:36:40 momjian Exp $ to $PostgreSQL: pgsql/doc/TODO,v 1.1115.2.1 2003/09/07 04:36:40 momjian Exp $
* Exit postmaster if postgresql.conf can not be opened
* Rename /scripts directory because they are all C programs now
* Allow the regression tests to start postmaster with -i so the tests
alink="#0000ff">
<H1>Frequently Asked Questions (FAQ) for PostgreSQL</H1>
- <P>Last updated: Fri Jul 25 18:07:30 EDT 2003</P>
+ <P>Last updated: Fri Sep 5 12:42:57 EDT 2003</P>
<P>Current maintainer: Bruce Momjian (<A href=
<p>A native port to MS Win NT/2000/XP is currently being worked
on. For more details on the current status of PostgreSQL on Windows see
<a href="http://techdocs.postgresql.org/guides/Windows">
- http://techdocs.postgresql.org/guides/Windows</a>.</p>
+ http://techdocs.postgresql.org/guides/Windows</a> and
+ <a href="http://candle.pha.pa.us/main/writings/pgsql/win32.html">
+ http://candle.pha.pa.us/main/writings/pgsql/win32.html</a>.</p>
<p>There is also a Novell Netware 6 port at
<a href="http://forge.novell.com">http://forge.novell.com</a>.</p>
Finally, you could use the <A href="#4.16"><SMALL>OID</SMALL></A>
returned from the <SMALL>INSERT</SMALL> statement to look up the
- default value, though this is probably the least portable approach.
+ default value, though this is probably the least portable approach,
+ and the oid value will wrap around when it reaches 4 billion.
In Perl, using DBI with Edmund Mergl's DBD::Pg module, the oid
value is made available via <I>$sth->{pg_oid_status}</I> after
<I>$sth->execute()</I>.
- <p>Letzte Aktualisierung der deutschen Übersetzung: Di., den 22.07.2003, 16:20 CET</p>
+ <p>Letzte Aktualisierung der deutschen Übersetzung: Di., den 02.09.2003, 10:00 CET</p>
<p>Die aktuellste Version dieses Dokuments liegt auf der PostgreSQL Website:</p>
<ul>
new_id = output of execute("SELECT currval('person_id_seq')");
</pre>
<p>Schließlich besteht noch die Möglichkeit, den von einer <small>INSERT</small>-Anweisung
- zurückgelieferten <small>OID</small>-Wert als einmaligen Wert zu verwenden.
- In Perl mit dem <em>DBD::Pg</em>-Modul von Edmund Mergl wird der OID-Wert nach einem
+ zurückgelieferten <a href="#4.16"><small>OID</small></a>-Wert als einmaligen Wert zu verwenden.
+ Dieser Ansatz ist allerdings PostgreSQL-spezifisch; außerdem wird nach
+ ca. 4 Milliarden Einträgen der <small>OID</small>-Wert wieder auf eine kleine Zahl
+ gesetzt, ist also nicht garantiert einmalig.</p>
+
+ <p>In Perl mit dem <em>DBD::Pg</em>-Modul wird der OID-Wert nach einem
<em>$sth->excute()</em> über <em>$sth->{pg_oid_status}</em> zurückgeliefert.</p>
<h4><a name="4.15.3">4.15.3</a>) Führen <em>currval()</em> und <em>nextval()</em> zu einer Race-Condition mit anderen
<ul>
<li><em>contrib/pgcrypto</em> enthält diverse Funktionen für die Benützung mit
- SQL-Abfragen;</li>
- <li>die einzige Möglichkeit, Kommunikationen zwischen Client und Server
- zu verschlüsseln, ist durch die Anwendung von <em>hostssl</em> in <em>pg_hba.conf</em>;</li>
+ SQL-Abfragen.</li>
+
+ <li>Um Verbindungen zwischen dem Server und Client-Anwendungen zu
+ verschlüsseln, muss in der Server-Konfigurationsdatei <em>postgresql.conf</em>
+ die <em>ssl</em>-Option auf <em>true</em> (Voreinstellung: <em>false</em>) gesetzt werden
+ und ein passender <em>host</em>- bzw. <em>hostssl</em>-Eintrag muss in
+ <em>pg_hba.conf</em> vorhanden sein. Zudem muss die <em>sslmode</em>-Einstellung
+ beim Client nicht auf <em>disable</em> gesetzt werden. (Bitte beachten Sie auch,
+ daß neben der eingebauten SSL-Unterstützung verschlüsselte Verbindungen
+ auch über externe Anwendungen wie <em>stunnel</em> oder <em>ssh</em> aufgebaut werden können).</li>
+
<li>Die Passwörter der Datenbanknutzer werden ab Version 7.3 automatisch
verschlüsselt (in früheren Versionen muß der Parameter <em>PASSWORD_ENCRYPTION</em>
- in <em>postgresql.conf</em> explizit eingeschaltet werden);</li>
- <li>der Server läuft auf einem verschlüsselten Dateisystem.</li>
+ in <em>postgresql.conf</em> explizit eingeschaltet werden).</li>
+ <li>Betrieb des Servers auf einem verschlüsselten Dateisystem.</li>
</ul>
<hr />
<p>Die englische Vorlage dieser FAQ wird ständig überarbeitet. Daher liegt
die Übersetzung nicht immer auf dem aktuellsten Stand.</p>
+ <p>Die aktuellste Version der deutschen Übersetzung befindet sich immer unter
+ <a href="http://sql-info.de/postgresql/FAQ_german.html">http://sql-info.de/postgresql/FAQ_german.html</a>.
+ Diese "Arbeitsversion" enthält eventuell Änderungen, die noch nicht auf der
+ PostgreSQL-Website eingebunden worden sind.</p>
+
<p>Über Verbesserungshinweise und Korrekturvorschläge sowie Verständnisfragen
zum Inhalt der FAQ freue ich mich. Ich nehme auch allgemeine Fragen zu PostgreSQL gerne
- entgegen, kann aber leider keine zeitige Antwort garantieren.</p>
+ entgegen, verweise jedoch auf die Mailing-Listen als schnelle und zuverlässige
+ Anlaufstellen.</p>
<p>Diese Übersetzung basiert teilweise auf einer früheren Übersetzung von Karsten
#
# PostgreSQL documentation makefile
#
-# $Header: /cvsroot/pgsql/doc/src/sgml/Makefile,v 1.57 2003/04/10 01:22:44 petere Exp $
+# $Header: /cvsroot/pgsql/doc/src/sgml/Makefile,v 1.57.2.1 2003/09/07 04:36:40 momjian Exp $
#
#----------------------------------------------------------------------------
# Enable draft mode during development
ifneq (,$(findstring devel, $(VERSION)))
-JADEFLAGS += -V draft-mode
+override JADEFLAGS += -V draft-mode
endif
$(JADE) $(JADEFLAGS) $(SGMLINCLUDE) $(CATALOG) -d stylesheet.dsl -i output-html -t sgml $<
-COLLATEINDEX := $(PERL) $(COLLATEINDEX) -f -g
+COLLATEINDEX := LC_ALL=C $(PERL) $(COLLATEINDEX) -f -g
ifeq (,$(wildcard HTML.index))
bookindex.sgml:
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/advanced.sgml,v 1.34 2003/03/25 16:15:35 petere Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/advanced.sgml,v 1.34.2.1 2003/09/07 04:36:40 momjian Exp $
-->
<chapter id="tutorial-advanced">
<title>Transactions</title>
<indexterm zone="tutorial-transactions">
- <primary>transactions</primary>
+ <primary>transaction</primary>
</indexterm>
<para>
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/array.sgml,v 1.29 2003/08/09 22:50:21 tgl Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/array.sgml,v 1.29.2.1 2003/09/07 04:36:40 momjian Exp $ -->
<sect1 id="arrays">
<title>Arrays</title>
<indexterm>
- <primary>arrays</primary>
+ <primary>array</primary>
</indexterm>
<para>
expression syntax is discussed in more detail in <xref
linkend="sql-syntax-array-constructors">.
</para>
-
</sect2>
<sect2>
<literal>||</literal>.
<programlisting>
SELECT ARRAY[1,2] || ARRAY[3,4];
- ?column?
----------------
- {{1,2},{3,4}}
+ ?column?
+-----------
+ {1,2,3,4}
(1 row)
SELECT ARRAY[5,6] || ARRAY[[1,2],[3,4]];
{{5,6},{1,2},{3,4}}
(1 row)
</programlisting>
+ </para>
+ <para>
The concatenation operator allows a single element to be pushed on to the
beginning or end of a one-dimensional array. It also accepts two
<replaceable>N</>-dimensional arrays, or an <replaceable>N</>-dimensional
- and an <replaceable>N+1</>-dimensional array. In the former case, the two
- <replaceable>N</>-dimension arrays become outer elements of an
- <replaceable>N+1</>-dimensional array. In the latter, the
- <replaceable>N</>-dimensional array is added as either the first or last
- outer element of the <replaceable>N+1</>-dimensional array.
-
- When extending an array by concatenation, the subscripts of its existing
- elements are preserved. For example, when pushing
- onto the beginning of an array with one-based subscripts, the resulting
- array has zero-based subscripts:
+ and an <replaceable>N+1</>-dimensional array.
+ </para>
+ <para>
+ When a single element is pushed on to the beginning of a one-dimensional
+ array, the result is an array with a lower bound subscript equal to
+ the righthand operand's lower bound subscript, minus one. When a single
+ element is pushed on to the end of a one-dimensional array, the result is
+ an array retaining the lower bound of the lefthand operand. For example:
<programlisting>
SELECT array_dims(1 || ARRAY[2,3]);
array_dims
------------
[0:2]
(1 row)
+
+SELECT array_dims(ARRAY[1,2] || 3);
+ array_dims
+------------
+ [1:3]
+(1 row)
+</programlisting>
+ </para>
+
+ <para>
+ When two arrays with an equal number of dimensions are concatenated, the
+ result retains the lower bound subscript of the lefthand operand's outer
+ dimension. The result is an array comprising every element of the lefthand
+ operand followed by every element of the righthand operand. For example:
+<programlisting>
+SELECT array_dims(ARRAY[1,2] || ARRAY[3,4,5]);
+ array_dims
+------------
+ [1:5]
+(1 row)
+
+SELECT array_dims(ARRAY[[1,2],[3,4]] || ARRAY[[5,6],[7,8],[9,0]]);
+ array_dims
+------------
+ [1:5][1:2]
+(1 row)
+</programlisting>
+ </para>
+
+ <para>
+ When an <replaceable>N</>-dimensional array is pushed on to the beginning
+ or end of an <replaceable>N+1</>-dimensional array, the result is
+ analogous to the element-array case above. Each <replaceable>N</>-dimensional
+ sub-array is essentially an element of the <replaceable>N+1</>-dimensional
+ array's outer dimension. For example:
+<programlisting>
+SELECT array_dims(ARRAY[1,2] || ARRAY[[3,4],[5,6]]);
+ array_dims
+------------
+ [0:2][1:2]
+(1 row)
</programlisting>
</para>
(1 row)
SELECT array_cat(ARRAY[1,2], ARRAY[3,4]);
- array_cat
----------------
- {{1,2},{3,4}}
+ array_cat
+-----------
+ {1,2,3,4}
(1 row)
SELECT array_cat(ARRAY[[1,2],[3,4]], ARRAY[5,6]);
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/backup.sgml,v 2.27 2003/08/01 01:01:52 tgl Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/backup.sgml,v 2.27.2.1 2003/09/07 04:36:40 momjian Exp $
-->
<chapter id="backup">
<title>Backup and Restore</title>
</para>
</important>
+ <tip>
+ <para>
+ Restore performance can be improved by increasing <literal>SORT_MEM</>
+ (see <xref linkend="runtime-config-resource-memory">).
+ </para>
+ </tip>
</sect2>
<sect2 id="backup-dump-all">
</para>
<para>
- For reasons of backward compatibility, <application>pg_dump</> does
- not dump large objects by default. To dump large objects you must use
- either the custom or the TAR output format, and use the <option>-b</> option in
- <application>pg_dump</>. See the reference pages for details.
- The directory <filename>contrib/pg_dumplo</> of the
- <productname>PostgreSQL</> source tree also contains a program that can
- dump large objects.
+ For reasons of backward compatibility, <application>pg_dump</>
+ does not dump large objects by default.<indexterm><primary>large
+ object</primary><secondary>backup</secondary></indexterm> To dump
+ large objects you must use either the custom or the TAR output
+ format, and use the <option>-b</> option in
+ <application>pg_dump</>. See the reference pages for details. The
+ directory <filename>contrib/pg_dumplo</> of the
+ <productname>PostgreSQL</> source tree also contains a program
+ that can dump large objects.
</para>
<para>
<sect1 id="migration">
<title>Migration between releases</title>
- <indexterm zone="migration"><primary>upgrading</></>
+
+ <indexterm zone="migration">
+ <primary>upgrading</primary>
+ </indexterm>
+
+ <indexterm zone="migration">
+ <primary>version</primary>
+ <secondary>compatibility</secondary>
+ </indexterm>
<para>
As a general rule, the internal data storage format is subject to
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/charset.sgml,v 2.37 2003/08/04 04:03:03 tgl Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/charset.sgml,v 2.37.2.1 2003/09/07 04:36:40 momjian Exp $ -->
<chapter id="charset">
<title>Localization</>
<listitem>
<para>
Sort order in queries using <command>ORDER BY</>
- <indexterm><primary>ORDER BY</></>
+ <indexterm><primary>ORDER BY</><secondary>and locales</></indexterm>
</para>
</listitem>
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/client-auth.sgml,v 1.53 2003/07/26 13:50:01 momjian Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/client-auth.sgml,v 1.53.2.1 2003/09/07 04:36:40 momjian Exp $
-->
<chapter id="client-authentication">
<programlisting>
(<replaceable>actual-IP-address</replaceable> xor <replaceable>IP-address-field</replaceable>) and <replaceable>IP-mask-field</replaceable>
</programlisting>
- must be zero for the record to match. (Of course IP addresses
- can be spoofed but this consideration is beyond the scope of
- <productname>PostgreSQL</productname>.) If you machine supports
- IPv6, the default <filename>pg_hba.conf</> file will have an
- IPv6 entry for <literal>localhost</>. You can add your own IPv6
- entries to the file. IPv6 entries are used only for IPv6
- connections.
+ must be zero for the record to match.
+ </para>
+
+ <para>
+ An IP address given in IPv4 format will match IPv6 connections that
+ have the corresponding address, for example <literal>127.0.0.1</>
+ will match the IPv6 address <literal>::ffff:127.0.0.1</>. An entry
+ given in IPv6 format will match only IPv6 connections, even if the
+ represented address is in the IPv4-in-IPv6 range. Note that entries
+ in IPv6 format will be rejected if the system's C library does not have
+ support for IPv6 addresses.
</para>
<para>
<term><replaceable>CIDR-mask</replaceable></term>
<listitem>
<para>
- This is an integer specifying the number of significant bits
- to set in the mask, and is an alternative to using the
- <replaceable>IP-mask</replaceable> notation. The number must
+ This field may be used as an alternative to the
+ <replaceable>IP-mask</replaceable> notation. It is an
+ integer specifying the number of high-order bits
+ to set in the mask. The number must
be between 0 and 32 (in the case of an IPv4 address) or 128
(in the case of an IPv6 address) inclusive. 0 will match any
address, while 32/128 will match only the exact host specified.
# TYPE DATABASE USER IP-ADDRESS IP-MASK METHOD
host all all 127.0.0.1 255.255.255.255 trust
+# The same as the last line but using a CIDR mask
+#
+# TYPE DATABASE USER IP-ADDRESS/CIDR-mask METHOD
+host all all 127.0.0.1/32 trust
+
# Allow any user from any host with IP address 192.168.93.x to connect
# to database "template1" as the same user name that ident reports for
# the connection (typically the Unix user name).
# TYPE DATABASE USER IP-ADDRESS IP-MASK METHOD
host template1 all 192.168.93.0 255.255.255.0 ident sameuser
+# The same as the last line but using a CIDR mask
+#
+# TYPE DATABASE USER IP-ADDRESS/CIDR-mask METHOD
+host template1 all 192.168.93.0/24 ident sameuser
+
# Allow a user from host 192.168.12.10 to connect to database
# "template1" if the user's password is correctly supplied.
#
</indexterm>
<indexterm>
<primary>password</primary>
+ <secondary>authentication</secondary>
</indexterm>
<para>
<para>
<productname>Kerberos</productname> is an industry-standard secure
- authentication system suitable for distributed computing over a
- public network. A description of the
- <productname>Kerberos</productname> system is far beyond the scope
- of this document; in all generality it can be quite complex (yet
- powerful). The <ulink
+ authentication system suitable for distributed computing over a public
+ network. A description of the <productname>Kerberos</productname> system
+ is far beyond the scope of this document; in all generality it can be
+ quite complex (yet powerful). The <ulink
url="http://www.nrl.navy.mil/CCS/people/kenh/kerberos-faq.html">Kerberos
- <acronym>FAQ</></ulink> or <ulink
- url="ftp://athena-dist.mit.edu">MIT Project Athena</ulink> can be
- a good starting point for exploration. Several sources for
- <productname>Kerberos</> distributions exist.
+ <acronym>FAQ</></ulink> or <ulink url="ftp://athena-dist.mit.edu">MIT
+ Project Athena</ulink> can be a good starting point for exploration.
+ Several sources for <productname>Kerberos</> distributions exist.
+ </para>
+
+ <para>
+ While <productname>PostgreSQL</> supports both Kerberos 4 and
+ Kerberos 5, only Kerberos 5 is recommended. Kerberos 4 is
+ considered insecure and no longer recommended for general
+ use.
</para>
<para>
<sect2 id="auth-pam">
<title>PAM Authentication</title>
+ <indexterm zone="auth-pam">
+ <primary>PAM</primary>
+ </indexterm>
+
<para>
This authentication method operates similarly to
<literal>password</literal> except that it uses PAM (Pluggable
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/datatype.sgml,v 1.122 2003/08/09 22:50:21 tgl Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/datatype.sgml,v 1.122.2.1 2003/09/07 04:36:40 momjian Exp $
-->
<chapter id="datatype">
<title id="datatype-title">Data Types</title>
<indexterm zone="datatype">
- <primary>data types</primary>
+ <primary>data type</primary>
</indexterm>
<indexterm>
- <primary>types</primary>
- <see>data types</see>
+ <primary>type</primary>
+ <see>data type</see>
</indexterm>
<para>
<title>Numeric Types</title>
<indexterm zone="datatype-numeric">
- <primary>data types</primary>
+ <primary>data type</primary>
<secondary>numeric</secondary>
</indexterm>
- <indexterm zone="datatype-numeric">
- <primary>integer</primary>
- </indexterm>
-
- <indexterm zone="datatype-numeric">
- <primary>smallint</primary>
- </indexterm>
-
- <indexterm zone="datatype-numeric">
- <primary>bigint</primary>
- </indexterm>
-
- <indexterm>
- <primary>int4</primary>
- <see>integer</see>
- </indexterm>
-
- <indexterm>
- <primary>int2</primary>
- <see>smallint</see>
- </indexterm>
-
- <indexterm>
- <primary>int8</primary>
- <see>bigint</see>
- </indexterm>
-
- <indexterm zone="datatype-numeric">
- <primary>numeric (data type)</primary>
- </indexterm>
-
- <indexterm>
- <primary>decimal</primary>
- <see>numeric</see>
- </indexterm>
-
- <indexterm zone="datatype-numeric">
- <primary>real</primary>
- </indexterm>
-
- <indexterm zone="datatype-numeric">
- <primary>double precision</primary>
- </indexterm>
-
- <indexterm>
- <primary>float4</primary>
- <see>real</see>
- </indexterm>
-
- <indexterm>
- <primary>float8</primary>
- <see>double precision</see>
- </indexterm>
-
- <indexterm zone="datatype-numeric">
- <primary>floating point</primary>
- </indexterm>
-
<para>
Numeric types consist of two-, four-, and eight-byte integers,
four- and eight-byte floating-point numbers, and fixed-precision
<sect2 id="datatype-int">
<title>Integer Types</title>
+ <indexterm zone="datatype-int">
+ <primary>integer</primary>
+ </indexterm>
+
+ <indexterm zone="datatype-int">
+ <primary>smallint</primary>
+ </indexterm>
+
+ <indexterm zone="datatype-int">
+ <primary>bigint</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>int4</primary>
+ <see>integer</see>
+ </indexterm>
+
+ <indexterm>
+ <primary>int2</primary>
+ <see>smallint</see>
+ </indexterm>
+
+ <indexterm>
+ <primary>int8</primary>
+ <see>bigint</see>
+ </indexterm>
+
<para>
The types <type>smallint</type>, <type>integer</type>, and
<type>bigint</type> store whole numbers, that is, numbers without
<sect2 id="datatype-numeric-decimal">
<title>Arbitrary Precision Numbers</title>
+ <indexterm zone="datatype-numeric-decimal">
+ <primary>numeric (data type)</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>decimal</primary>
+ <see>numeric</see>
+ </indexterm>
+
<para>
The type <type>numeric</type> can store numbers with up to 1000
digits of precision and perform calculations exactly. It is
<sect2 id="datatype-float">
<title>Floating-Point Types</title>
+ <indexterm zone="datatype-float">
+ <primary>real</primary>
+ </indexterm>
+
+ <indexterm zone="datatype-float">
+ <primary>double precision</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>float4</primary>
+ <see>real</see>
+ </indexterm>
+
+ <indexterm>
+ <primary>float8</primary>
+ <see>double precision</see>
+ </indexterm>
+
+ <indexterm zone="datatype-float">
+ <primary>floating point</primary>
+ </indexterm>
+
<para>
The data types <type>real</type> and <type>double
precision</type> are inexact, variable-precision numeric types.
</indexterm>
<indexterm>
- <primary>sequences</primary>
+ <primary>sequence</primary>
<secondary>and serial type</secondary>
</indexterm>
<title>Character Types</title>
<indexterm zone="datatype-character">
- <primary>character strings</primary>
+ <primary>character string</primary>
<secondary>data types</secondary>
</indexterm>
<indexterm>
- <primary>strings</primary>
- <see>character strings</see>
+ <primary>string</primary>
+ <see>character string</see>
</indexterm>
- <indexterm>
+ <indexterm zone="datatype-character">
+ <primary>character</primary>
+ </indexterm>
+
+ <indexterm zone="datatype-character">
+ <primary>character varying</primary>
+ </indexterm>
+
+ <indexterm zone="datatype-character">
<primary>text</primary>
- <see>character strings</see>
+ </indexterm>
+
+ <indexterm zone="datatype-character">
+ <primary>char</primary>
+ </indexterm>
+
+ <indexterm zone="datatype-character">
+ <primary>varchar</primary>
</indexterm>
<table id="datatype-character-table">
<sect1 id="datatype-binary">
<title>Binary Data Types</title>
+
+ <indexterm zone="datatype-binary">
+ <primary>binary data</primary>
+ </indexterm>
+
+ <indexterm zone="datatype-binary">
+ <primary>bytea</primary>
+ </indexterm>
+
<para>
The <type>bytea</type> data type allows storage of binary strings;
see <xref linkend="datatype-binary-table">.
<sect1 id="datatype-datetime">
<title>Date/Time Types</title>
+ <indexterm zone="datatype-datetime">
+ <primary>date</primary>
+ </indexterm>
+ <indexterm zone="datatype-datetime">
+ <primary>time</primary>
+ </indexterm>
+ <indexterm zone="datatype-datetime">
+ <primary>time without time zone</primary>
+ </indexterm>
+ <indexterm zone="datatype-datetime">
+ <primary>time with time zone</primary>
+ </indexterm>
+ <indexterm zone="datatype-datetime">
+ <primary>timestamp</primary>
+ </indexterm>
+ <indexterm zone="datatype-datetime">
+ <primary>timestamp with time zone</primary>
+ </indexterm>
+ <indexterm zone="datatype-datetime">
+ <primary>timestamp without time zone</primary>
+ </indexterm>
+ <indexterm zone="datatype-datetime">
+ <primary>interval</primary>
+ </indexterm>
+ <indexterm zone="datatype-datetime">
+ <primary>time span</primary>
+ </indexterm>
+
<para>
<productname>PostgreSQL</productname> supports the full set of
<acronym>SQL</acronym> date and time types, shown in <xref
<indexterm>
<primary>date</primary>
- <secondary>data type</secondary>
</indexterm>
<para>
<indexterm>
<primary>time</primary>
- <secondary>data type</secondary>
</indexterm>
<indexterm>
<primary>time without time zone</primary>
- <secondary>time</secondary>
</indexterm>
<indexterm>
<primary>time with time zone</primary>
- <secondary>data type</secondary>
</indexterm>
<para>
<indexterm>
<primary>timestamp</primary>
- <secondary>data type</secondary>
</indexterm>
<indexterm>
<primary>timestamp with time zone</primary>
- <secondary>data type</secondary>
</indexterm>
<indexterm>
<primary>timestamp without time zone</primary>
- <secondary>data type</secondary>
</indexterm>
<para>
<indexterm>
<primary>date</primary>
<secondary>output format</secondary>
- <seealso>Formatting</seealso>
+ <seealso>formatting</seealso>
</indexterm>
<indexterm>
<primary>time</primary>
<secondary>output format</secondary>
- <seealso>Formatting</seealso>
+ <seealso>formatting</seealso>
</indexterm>
<para>
<title>Time Zones</title>
<indexterm zone="datatype-timezones">
- <primary>time zones</primary>
+ <primary>time zone</primary>
</indexterm>
<para>
<title>Line Segments</title>
<indexterm>
- <primary>line</primary>
+ <primary>lseg</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>line segment</primary>
</indexterm>
<para>
<primary>box (data type)</primary>
</indexterm>
+ <indexterm>
+ <primary>rectangle</primary>
+ </indexterm>
+
<para>
Boxes are represented by pairs of points that are opposite
corners of the box.
<indexterm zone="datatype-net-types">
<primary>network</primary>
- <secondary>addresses</secondary>
+ <secondary>data types</secondary>
</indexterm>
<para>
<title>Bit String Types</title>
<indexterm zone="datatype-bit">
- <primary>bit strings</primary>
+ <primary>bit string</primary>
<secondary>data type</secondary>
</indexterm>
</thead>
<tbody>
- <row>
- <entry><type>record</></entry>
- <entry>Identifies a function returning an unspecified row type.</entry>
- </row>
-
<row>
<entry><type>any</></entry>
<entry>Indicates that a function accepts any input data type whatever.</entry>
<row>
<entry><type>anyarray</></entry>
<entry>Indicates that a function accepts any array data type
- (see <xref linkend="types-polymorphic">).</entry>
+ (see <xref linkend="extend-types-polymorphic">).</entry>
</row>
<row>
<entry><type>anyelement</></entry>
<entry>Indicates that a function accepts any data type
- (see <xref linkend="types-polymorphic">).</entry>
+ (see <xref linkend="extend-types-polymorphic">).</entry>
</row>
<row>
- <entry><type>void</></entry>
- <entry>Indicates that a function returns no value.</entry>
+ <entry><type>cstring</></entry>
+ <entry>Indicates that a function accepts or returns a null-terminated C string.</entry>
</row>
<row>
- <entry><type>trigger</></entry>
- <entry>A trigger function is declared to return <type>trigger.</></entry>
+ <entry><type>internal</></entry>
+ <entry>Indicates that a function accepts or returns a server-internal
+ data type.</entry>
</row>
<row>
</row>
<row>
- <entry><type>cstring</></entry>
- <entry>Indicates that a function accepts or returns a null-terminated C string.</entry>
+ <entry><type>record</></entry>
+ <entry>Identifies a function returning an unspecified row type.</entry>
</row>
<row>
- <entry><type>internal</></entry>
- <entry>Indicates that a function accepts or returns a server-internal
- data type.</entry>
+ <entry><type>trigger</></entry>
+ <entry>A trigger function is declared to return <type>trigger.</></entry>
+ </row>
+
+ <row>
+ <entry><type>void</></entry>
+ <entry>Indicates that a function returns no value.</entry>
</row>
<row>
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/datetime.sgml,v 2.32 2003/07/29 00:03:17 tgl Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/datetime.sgml,v 2.32.2.1 2003/09/07 04:36:41 momjian Exp $
-->
<appendix id="datetime-appendix">
</para>
<indexterm>
- <primary>time zones</primary>
+ <primary>time zone</primary>
+ <secondary>abbreviations</secondary>
</indexterm>
<para>
<entry>+07:00</entry>
<entry>Christmas (Island) Time</entry>
</row>
-<!--
- Conflicts with China Coastal Time
- <row>
- <entry>CCT</entry>
- <entry>+06:30</entry>
- <entry>Cocos Island Time</entry>
- </row>
--->
<row>
<entry>MMT</entry>
<entry>+06:30</entry>
- <entry>Myannar Time</entry>
+ <entry>Myanmar Time</entry>
</row>
<row>
<entry>ALMT</entry>
<entry>-01:00</entry>
<entry>West Africa Time</entry>
</row>
+ <row>
+ <entry>FNST</entry>
+ <entry>-01:00</entry>
+ <entry>Fernando de Noronha Summer Time</entry>
+ </row>
+ <row>
+ <entry>FNT</entry>
+ <entry>-02:00</entry>
+ <entry>Fernando de Noronha Time</entry>
+ </row>
+ <row>
+ <entry>BRST</entry>
+ <entry>-02:00</entry>
+ <entry>Brasilia Summer Time</entry>
+ </row>
<row>
<entry>NDT</entry>
<entry>-02:30</entry>
<entry>-03:00</entry>
<entry>(unknown)</entry>
</row>
+ <row>
+ <entry>BRT</entry>
+ <entry>-03:00</entry>
+ <entry>Brasilia Time</entry>
+ </row>
<row>
<entry>NFT</entry>
<entry>-03:30</entry>
<entry>-04:00</entry>
<entry>Atlantic/Porto Acre Summer Time</entry>
</row>
- <row>
- <entry>ACT</entry>
- <entry>-05:00</entry>
- <entry>Atlantic/Porto Acre Standard Time</entry>
- </row>
<row>
<entry>EDT</entry>
<entry>-04:00</entry>
<entry>GMT +4 hours</entry>
</row>
-->
+ <row>
+ <entry>ACT</entry>
+ <entry>-05:00</entry>
+ <entry>Atlantic/Porto Acre Standard Time</entry>
+ </row>
<row>
<entry>CDT</entry>
<entry>-05:00</entry>
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/ddl.sgml,v 1.17 2003/08/14 23:13:27 tgl Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/ddl.sgml,v 1.17.2.1 2003/09/07 04:36:41 momjian Exp $ -->
<chapter id="ddl">
<title>Data Definition</title>
<sect1 id="ddl-basics">
<title>Table Basics</title>
+ <indexterm zone="ddl-basics">
+ <primary>table</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>row</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>column</primary>
+ </indexterm>
+
<para>
A table in a relational database is much like a table on paper: It
consists of rows and columns. The number and order of the columns
containing both date and time.
</para>
+ <indexterm>
+ <primary>table</primary>
+ <secondary>creating</secondary>
+ </indexterm>
+
<para>
To create a table, you use the aptly named <literal>CREATE
TABLE</literal> command. In this command you specify at least a
highly unusual and often a questionable design.
</para>
+ <indexterm>
+ <primary>table</primary>
+ <secondary>removing</secondary>
+ </indexterm>
+
<para>
If you no longer need a table, you can remove it using the
<command>DROP TABLE</command> command. For example:
</para>
<indexterm>
- <primary>columns</primary>
- <secondary>system columns</secondary>
+ <primary>column</primary>
+ <secondary>system column</secondary>
</indexterm>
<variablelist>
<para>
<indexterm>
<primary>OID</primary>
+ <secondary>column</secondary>
</indexterm>
The object identifier (object ID) of a row. This is a serial
number that is automatically added by
<varlistentry>
<term><structfield>tableoid</></term>
<listitem>
+ <indexterm>
+ <primary>tableoid</primary>
+ </indexterm>
+
<para>
The OID of the table containing this row. This column is
particularly handy for queries that select from inheritance
<varlistentry>
<term><structfield>xmin</></term>
<listitem>
+ <indexterm>
+ <primary>xmin</primary>
+ </indexterm>
+
<para>
The identity (transaction ID) of the inserting transaction for
this tuple. (Note: In this context, a tuple is an individual
<varlistentry>
<term><structfield>cmin</></term>
<listitem>
+ <indexterm>
+ <primary>cmin</primary>
+ </indexterm>
+
<para>
The command identifier (starting at zero) within the inserting
transaction.
<varlistentry>
<term><structfield>xmax</></term>
<listitem>
+ <indexterm>
+ <primary>xmax</primary>
+ </indexterm>
+
<para>
The identity (transaction ID) of the deleting transaction, or
zero for an undeleted tuple. It is possible for this column to
<varlistentry>
<term><structfield>cmax</></term>
<listitem>
+ <indexterm>
+ <primary>cmax</primary>
+ </indexterm>
+
<para>
The command identifier within the deleting transaction, or zero.
</para>
<varlistentry>
<term><structfield>ctid</></term>
<listitem>
+ <indexterm>
+ <primary>ctid</primary>
+ </indexterm>
+
<para>
The physical location of the tuple within its table. Note that
although the <structfield>ctid</structfield> can be used to
<sect1 id="ddl-default">
<title>Default Values</title>
+ <indexterm zone="ddl-default">
+ <primary>default value</primary>
+ </indexterm>
+
<para>
A column can be assigned a default value. When a new row is
created and no values are specified for some of the columns, the
</para>
<para>
+ <indexterm><primary>null value</primary><secondary>default value</secondary></indexterm>
If no default value is declared explicitly, the null value is the
default value. This usually makes sense because a null value can
be thought to represent unknown data.
<sect1 id="ddl-constraints">
<title>Constraints</title>
+ <indexterm zone="ddl-constraints">
+ <primary>constraint</primary>
+ </indexterm>
+
<para>
Data types are a way to limit the kind of data that can be stored
in a table. For many applications, however, the constraint they
<sect2>
<title>Check Constraints</title>
+ <indexterm>
+ <primary>check constraint</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>constraint</primary>
+ <secondary>check</secondary>
+ </indexterm>
+
<para>
A check constraint is the most generic constraint type. It allows
you to specify that the value in a certain column must satisfy an
would not make too much sense.
</para>
+ <indexterm>
+ <primary>constraint</primary>
+ <secondary>name</secondary>
+ </indexterm>
+
<para>
You can also give the constraint a separate name. This clarifies
error messages and allows you to refer to the constraint when you
It's a matter of taste.
</para>
+ <indexterm>
+ <primary>null value</primary>
+ <secondary sortas="check constraints">with check constraints</secondary>
+ </indexterm>
+
<para>
It should be noted that a check constraint is satisfied if the
check expression evaluates to true or the null value. Since most
<sect2>
<title>Not-Null Constraints</title>
+ <indexterm>
+ <primary>not-null constraint</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>constraint</primary>
+ <secondary>NOT NULL</secondary>
+ </indexterm>
+
<para>
A not-null constraint simply specifies that a column must not
assume the null value. A syntax example:
<sect2>
<title>Unique Constraints</title>
+ <indexterm>
+ <primary>unique constraint</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>constraint</primary>
+ <secondary>unique</secondary>
+ </indexterm>
+
<para>
Unique constraints ensure that the data contained in a column or a
group of columns is unique with respect to all the rows in the
</programlisting>
</para>
+ <indexterm>
+ <primary>null value</primary>
+ <secondary sortas="unique constraints">with unique constraints</secondary>
+ </indexterm>
+
<para>
In general, a unique constraint is violated when there are (at
least) two rows in the table where the values of each of the
<sect2>
<title>Primary Keys</title>
+ <indexterm>
+ <primary>primary key</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>constraint</primary>
+ <secondary>primary key</secondary>
+ </indexterm>
+
<para>
Technically, a primary key constraint is simply a combination of a
unique constraint and a not-null constraint. So, the following
<sect2 id="ddl-constraints-fk">
<title>Foreign Keys</title>
+ <indexterm>
+ <primary>foreign key</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>constraint</primary>
+ <secondary>foreign key</secondary>
+ </indexterm>
+
+ <indexterm>
+ <primary>referential integrity</primary>
+ </indexterm>
+
<para>
A foreign key constraint specifies that the values in a column (or
a group of columns) must match the values appearing in some row
the last table.
</para>
+ <indexterm>
+ <primary>CASCADE</primary>
+ <secondary>foreign key action</secondary>
+ </indexterm>
+
+ <indexterm>
+ <primary>RESTRICT</primary>
+ <secondary>foreign key action</secondary>
+ </indexterm>
+
<para>
We know that the foreign keys disallow creation of orders that
do not relate to any products. But what if a product is removed
<sect1 id="ddl-alter">
<title>Modifying Tables</title>
+ <indexterm zone="ddl-alter">
+ <primary>table</primary>
+ <secondary>modifying</secondary>
+ </indexterm>
+
<para>
When you create a table and you realize that you made a mistake, or
the requirements of the application changed, then you can drop the
<sect2>
<title>Adding a Column</title>
+ <indexterm>
+ <primary>column</primary>
+ <secondary>adding</secondary>
+ </indexterm>
+
<para>
To add a column, use this command:
<programlisting>
<sect2>
<title>Removing a Column</title>
+ <indexterm>
+ <primary>column</primary>
+ <secondary>removing</secondary>
+ </indexterm>
+
<para>
To remove a column, use this command:
<programlisting>
<sect2>
<title>Adding a Constraint</title>
+ <indexterm>
+ <primary>constraint</primary>
+ <secondary>adding</secondary>
+ </indexterm>
+
<para>
To add a constraint, the table constraint syntax is used. For example:
<programlisting>
<sect2>
<title>Removing a Constraint</title>
+ <indexterm>
+ <primary>constraint</primary>
+ <secondary>removing</secondary>
+ </indexterm>
+
<para>
To remove a constraint you need to know its name. If you gave it
a name then that's easy. Otherwise the system assigned a
<sect2>
<title>Changing the Default</title>
+ <indexterm>
+ <primary>default value</primary>
+ <secondary>changing</secondary>
+ </indexterm>
+
<para>
To set a new default for a column, use a command like this:
<programlisting>
<sect2>
<title>Renaming a Column</title>
+ <indexterm>
+ <primary>column</primary>
+ <secondary>renaming</secondary>
+ </indexterm>
+
<para>
To rename a column:
<programlisting>
<sect2>
<title>Renaming a Table</title>
+ <indexterm>
+ <primary>table</primary>
+ <secondary>renaming</secondary>
+ </indexterm>
+
<para>
To rename a table:
<programlisting>
<sect1 id="ddl-priv">
<title>Privileges</title>
+ <indexterm zone="ddl-priv">
+ <primary>privilege</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>permission</primary>
+ <see>privilege</see>
+ </indexterm>
+
<para>
When you create a database object, you become its owner. By
default, only the owner of an object can do anything with the
<sect1 id="ddl-schemas">
<title>Schemas</title>
- <indexterm>
- <primary>schemas</primary>
- </indexterm>
-
- <indexterm>
- <primary>namespaces</primary>
+ <indexterm zone="ddl-schemas">
+ <primary>schema</primary>
</indexterm>
<para>
<sect2 id="ddl-schemas-create">
<title>Creating a Schema</title>
+ <indexterm zone="ddl-schemas-create">
+ <primary>schema</primary>
+ <secondary>creating</secondary>
+ </indexterm>
+
<para>
To create a separate schema, use the command <literal>CREATE
SCHEMA</literal>. Give the schema a name of your choice. For
</para>
<indexterm>
- <primary>qualified names</primary>
+ <primary>qualified name</primary>
</indexterm>
<indexterm>
- <primary>names</primary>
+ <primary>name</primary>
<secondary>qualified</secondary>
</indexterm>
the following chapters.
</para>
+ <indexterm>
+ <primary>schema</primary>
+ <secondary>removing</secondary>
+ </indexterm>
+
<para>
To drop a schema if it's empty (all objects in it have been
dropped), use
<sect2 id="ddl-schemas-public">
<title>The Public Schema</title>
+ <indexterm zone="ddl-schemas-public">
+ <primary>schema</primary>
+ <secondary>public</secondary>
+ </indexterm>
+
<para>
In the previous sections we created tables without specifying any
schema names. By default, such tables (and other objects) are
</indexterm>
<indexterm>
- <primary>unqualified names</primary>
+ <primary>unqualified name</primary>
</indexterm>
<indexterm>
- <primary>names</primary>
+ <primary>name</primary>
<secondary>unqualified</secondary>
</indexterm>
in other schemas in the database.
</para>
+ <indexterm>
+ <primary>schema</primary>
+ <secondary>current</secondary>
+ </indexterm>
+
<para>
The first schema named in the search path is called the current schema.
Aside from being the first schema searched, it is also the schema in
command does not specify a schema name.
</para>
+ <indexterm>
+ <primary>search_path</primary>
+ </indexterm>
+
<para>
To show the current search path, use the following command:
<programlisting>
<sect2 id="ddl-schemas-priv">
<title>Schemas and Privileges</title>
+ <indexterm zone="ddl-schemas-priv">
+ <primary>privilege</primary>
+ <secondary sortas="schemas">for schemas</secondary>
+ </indexterm>
+
<para>
By default, users cannot see the objects in schemas they do not
own. To allow that, the owner of the schema needs to grant the
</para>
</sect2>
- <sect2>
+ <sect2 id="ddl-schemas-catalog">
<title>The System Catalog Schema</title>
+ <indexterm zone="ddl-schemas-catalog">
+ <primary>system catalog</primary>
+ <secondary>schema</secondary>
+ </indexterm>
+
<para>
In addition to <literal>public</> and user-created schemas, each
database contains a <literal>pg_catalog</> schema, which contains
<sect1 id="ddl-depend">
<title>Dependency Tracking</title>
+ <indexterm zone="ddl-depend">
+ <primary>CASCADE</primary>
+ <secondary sortas="DROP">with DROP</secondary>
+ </indexterm>
+
+ <indexterm zone="ddl-depend">
+ <primary>RESTRICT</primary>
+ <secondary sortas="DROP">with DROP</secondary>
+ </indexterm>
+
<para>
When you create complex database structures involving many tables
with foreign key constraints, views, triggers, functions, etc. you
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/dfunc.sgml,v 1.25 2003/04/10 01:22:44 petere Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/dfunc.sgml,v 1.25.2.1 2003/09/07 04:36:41 momjian Exp $
-->
<sect2 id="dfunc">
<para>
Before you are able to use your
<productname>PostgreSQL</productname> extension functions written in
- C, they must be compiled and linked in a special way to produce a file
- that can be dynamically loaded by the server. To be
- precise, a <firstterm>shared library</firstterm> needs to be created.
+ C, they must be compiled and linked in a special way to produce a
+ file that can be dynamically loaded by the server. To be precise, a
+ <firstterm>shared library</firstterm> needs to be
+ created.<indexterm><primary>shared library</></indexterm>
+
</para>
<para>
</para>
<para>
- <indexterm><primary>PIC</></>
- Creating shared libraries is generally analogous to linking
- executables: first the source files are compiled into object files,
- then the object files are linked together. The object files need to
- be created as <firstterm>position-independent code</firstterm>
- (<acronym>PIC</acronym>), which conceptually means that they can be
- placed at an arbitrary location in memory when they are loaded by the
- executable. (Object files intended for executables are usually not compiled
- that way.) The command to link a shared library contains special
- flags to distinguish it from linking an executable. --- At least
- this is the theory. On some systems the practice is much uglier.
+ <indexterm><primary>PIC</></> Creating shared libraries is generally
+ analogous to linking executables: first the source files are
+ compiled into object files, then the object files are linked
+ together. The object files need to be created as
+ <firstterm>position-independent code</firstterm>
+ (<acronym>PIC</acronym>),<indexterm><primary>PIC</></> which
+ conceptually means that they can be placed at an arbitrary location
+ in memory when they are loaded by the executable. (Object files
+ intended for executables are usually not compiled that way.) The
+ command to link a shared library contains special flags to
+ distinguish it from linking an executable. --- At least this is the
+ theory. On some systems the practice is much uglier.
</para>
<para>
<variablelist>
<varlistentry>
<term><systemitem class="osname">BSD/OS</></term>
- <indexterm><primary>BSD/OS</></>
+ <indexterm><primary>BSD/OS</><secondary>shared library</></>
<listitem>
<para>
The compiler flag to create <acronym>PIC</acronym> is
<varlistentry>
<term><systemitem class="osname">FreeBSD</></term>
- <indexterm><primary>FreeBSD</></>
+ <indexterm><primary>FreeBSD</><secondary>shared library</></>
<listitem>
<para>
The compiler flag to create <acronym>PIC</acronym> is
<varlistentry>
<term><systemitem class="osname">HP-UX</></term>
- <indexterm><primary>HP-UX</></>
+ <indexterm><primary>HP-UX</><secondary>shared library</></>
<listitem>
<para>
The compiler flag of the system compiler to create
<varlistentry>
<term><systemitem class="osname">IRIX</></term>
- <indexterm><primary>IRIX</></>
+ <indexterm><primary>IRIX</><secondary>shared library</></>
<listitem>
<para>
<acronym>PIC</acronym> is the default, no special compiler
<varlistentry>
<term><systemitem class="osname">Linux</></term>
- <indexterm><primary>Linux</></>
+ <indexterm><primary>Linux</><secondary>shared library</></>
<listitem>
<para>
The compiler flag to create <acronym>PIC</acronym> is
<varlistentry>
<term><systemitem class="osname">MacOS X</></term>
- <indexterm><primary>MacOS X</></>
+ <indexterm><primary>MacOS X</><secondary>shared library</></>
<listitem>
<para>
Here is an example. It assumes the developer tools are installed.
<varlistentry>
<term><systemitem class="osname">NetBSD</></term>
- <indexterm><primary>NetBSD</></>
+ <indexterm><primary>NetBSD</><secondary>shared library</></>
<listitem>
<para>
The compiler flag to create <acronym>PIC</acronym> is
<varlistentry>
<term><systemitem class="osname">OpenBSD</></term>
- <indexterm><primary>OpenBSD</></>
+ <indexterm><primary>OpenBSD</><secondary>shared library</></>
<listitem>
<para>
The compiler flag to create <acronym>PIC</acronym> is
<varlistentry>
<term><systemitem class="osname">Solaris</></term>
- <indexterm><primary>Solaris</></>
+ <indexterm><primary>Solaris</><secondary>shared library</></>
<listitem>
<para>
The compiler flag to create <acronym>PIC</acronym> is
<varlistentry>
<term><systemitem class="osname">Tru64 UNIX</></term>
- <indexterm><primary>Tru64 UNIX</></>
+ <indexterm><primary>Tru64 UNIX</><secondary>shared library</></>
<indexterm><primary>Digital UNIX</><see>Tru64 UNIX</></>
<listitem>
<para>
<varlistentry>
<term><systemitem class="osname">UnixWare</></term>
- <indexterm><primary>UnixWare</></>
+ <indexterm><primary>UnixWare</><secondary>shared library</></>
<listitem>
<para>
The compiler flag to create <acronym>PIC</acronym> is <option>-K
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/dml.sgml,v 1.5 2003/08/10 01:20:34 tgl Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/dml.sgml,v 1.5.2.1 2003/09/07 04:36:41 momjian Exp $ -->
<chapter id="dml">
<title>Data Manipulation</title>
<sect1 id="dml-insert">
<title>Inserting Data</title>
+ <indexterm zone="dml-insert">
+ <primary>inserting</primary>
+ </indexterm>
+
+ <indexterm zone="dml-insert">
+ <primary>INSERT</primary>
+ </indexterm>
+
<para>
When a table is created, it contains no data. The first thing to
do before a database can be of much use is to insert data. Data is
<sect1 id="dml-update">
<title>Updating Data</title>
+ <indexterm zone="dml-update">
+ <primary>updating</primary>
+ </indexterm>
+
+ <indexterm zone="dml-update">
+ <primary>UPDATE</primary>
+ </indexterm>
+
<para>
The modification of data that is already in the database is
referred to as updating. You can update individual rows, all the
<sect1 id="dml-delete">
<title>Deleting Data</title>
+ <indexterm zone="dml-delete">
+ <primary>deleting</primary>
+ </indexterm>
+
+ <indexterm zone="dml-delete">
+ <primary>DELETE</primary>
+ </indexterm>
+
<para>
So far we have explained how to add data to tables and how to
change data. What remains is to discuss how to remove data that is
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/ecpg.sgml,v 1.48 2003/08/07 04:17:21 momjian Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/ecpg.sgml,v 1.48.2.1 2003/09/07 04:36:41 momjian Exp $
-->
<chapter id="ecpg">
<title><application>ECPG</application> - Embedded <acronym>SQL</acronym> in C</title>
<indexterm zone="ecpg"><primary>embedded SQL</primary><secondary>in C</secondary></indexterm>
+ <indexterm zone="ecpg"><primary>C</primary></indexterm>
+ <indexterm zone="ecpg"><primary>ECPG</primary></indexterm>
<para>
This chapter describes the embedded <acronym>SQL</acronym> package
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/extend.sgml,v 1.23 2003/08/09 22:50:21 tgl Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/extend.sgml,v 1.23.2.1 2003/09/07 04:36:41 momjian Exp $
-->
<chapter id="extend">
</para>
</sect1>
- <sect1 id="type-system">
+ <sect1 id="extend-type-system">
<title>The <productname>PostgreSQL</productname> Type System</title>
- <indexterm zone="type-system">
- <primary>extending SQL</primary>
- <secondary>types</secondary>
+ <indexterm zone="extend-type-system">
+ <primary>base type</primary>
+ </indexterm>
+
+ <indexterm zone="extend-type-system">
+ <primary>data type</primary>
+ <secondary>base</secondary>
+ </indexterm>
+
+ <indexterm zone="extend-type-system">
+ <primary>composite type</primary>
</indexterm>
- <indexterm zone="type-system">
- <primary>data types</primary>
+ <indexterm zone="extend-type-system">
+ <primary>data type</primary>
+ <secondary>composite</secondary>
</indexterm>
<para>
pseudo-types.
</para>
- <sect2 id="types-polymorphic">
+ <sect2 id="extend-types-polymorphic">
<title>Polymorphic Types and Functions</title>
- <indexterm>
- <primary>polymorphic types</primary>
+ <indexterm zone="extend-types-polymorphic">
+ <primary>polymorphic type</primary>
+ </indexterm>
+
+ <indexterm zone="extend-types-polymorphic">
+ <primary>polymorphic function</primary>
+ </indexterm>
+
+ <indexterm zone="extend-types-polymorphic">
+ <primary>type</primary>
+ <secondary>polymorphic</secondary>
</indexterm>
- <indexterm>
- <primary>polymorphic functions</primary>
+ <indexterm zone="extend-types-polymorphic">
+ <primary>function</primary>
+ <secondary>polymorphic</secondary>
</indexterm>
<para>
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/filelist.sgml,v 1.29 2003/05/18 20:55:56 petere Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/filelist.sgml,v 1.29.2.1 2003/09/07 04:36:41 momjian Exp $ -->
<!entity history SYSTEM "history.sgml">
<!entity info SYSTEM "info.sgml">
<!entity libpgeasy SYSTEM "libpgeasy.sgml">
<!entity libpq SYSTEM "libpq.sgml">
<!entity libpgtcl SYSTEM "libpgtcl.sgml">
-<!entity pygresql SYSTEM "pygresql.sgml">
<!entity lobj SYSTEM "lobj.sgml">
<!entity odbc SYSTEM "odbc.sgml">
<!entity rules SYSTEM "rules.sgml">
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/func.sgml,v 1.166 2003/08/10 01:20:34 tgl Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/func.sgml,v 1.166.2.1 2003/09/07 04:36:41 momjian Exp $
PostgreSQL documentation
-->
<title>Functions and Operators</title>
<indexterm zone="functions">
- <primary>functions</primary>
+ <primary>function</primary>
</indexterm>
<indexterm zone="functions">
- <primary>operators</primary>
+ <primary>operator</primary>
</indexterm>
<para>
<title>Logical Operators</title>
<indexterm zone="functions-logical">
- <primary>operators</primary>
+ <primary>operator</primary>
<secondary>logical</secondary>
</indexterm>
The usual logical operators are available:
<indexterm>
- <primary>and</primary>
- <secondary>operator</secondary>
+ <primary>AND (operator)</primary>
</indexterm>
<indexterm>
- <primary>or</primary>
- <secondary>operator</secondary>
+ <primary>OR (operator)</primary>
</indexterm>
<indexterm>
- <primary>not</primary>
- <secondary>operator</secondary>
+ <primary>NOT (operator)</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>conjunction</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>disjunction</primary>
+ </indexterm>
+
+ <indexterm>
+ <primary>negation</primary>
</indexterm>
<simplelist>
<primary>between</primary>
</indexterm>
In addition to the comparison operators, the special
- <token>BETWEEN</token> construct is available.
+ <token>BETWEEN</token> construct is available.<indexterm><primary>BETWEEN</primary></indexterm>
<synopsis>
<replaceable>a</replaceable> BETWEEN <replaceable>x</replaceable> AND <replaceable>y</replaceable>
</synopsis>
<replaceable>expression</replaceable> ISNULL
<replaceable>expression</replaceable> NOTNULL
</synopsis>
+ <indexterm><primary>null value</primary><secondary>comparing</secondary></indexterm>
</para>
<para>
<entry>
String concatenation
<indexterm>
- <primary>character strings</primary>
+ <primary>character string</primary>
<secondary>concatenation</secondary>
</indexterm>
</entry>
<entry>
Number of characters in string
<indexterm>
- <primary>character strings</primary>
+ <primary>character string</primary>
<secondary>length</secondary>
</indexterm>
<indexterm>
<primary>length</primary>
- <secondary>character strings</secondary>
+ <secondary sortas="character string">of a character string</secondary>
<see>character strings, length</see>
</indexterm>
</entry>
<entry>
Number of characters in string
<indexterm>
- <primary>character strings</primary>
+ <primary>character string</primary>
<secondary>length</secondary>
</indexterm>
<indexterm>
<primary>length</primary>
- <secondary>character strings</secondary>
+ <secondary sortas="character string">of a character string</secondary>
<see>character strings, length</see>
</indexterm>
</entry>
</row>
<row>
- <entry><literal><function>quote_ident</function>(<parameter>string</parameter> text)</literal></entry>
+ <entry><literal><function>quote_ident</function>(<parameter>string</parameter> text)</literal><indexterm><primary>quote_ident</></></entry>
<entry><type>text</type></entry>
<entry>
Return the given string suitably quoted to be used as an identifier
</row>
<row>
- <entry><literal><function>quote_literal</function>(<parameter>string</parameter> text)</literal></entry>
+ <entry><literal><function>quote_literal</function>(<parameter>string</parameter> text)</literal><indexterm><primary>quote_literal</></></entry>
<entry><type>text</type></entry>
<entry>
Return the given string suitably quoted to be used as a string literal
<sect1 id="functions-binarystring">
<title>Binary String Functions and Operators</title>
+ <indexterm zone="functions-binarystring">
+ <primary>binary data</primary>
+ <secondary>functions</secondary>
+ </indexterm>
+
<para>
This section describes functions and operators for examining and
manipulating values of type <type>bytea</type>.
<entry>
String concatenation
<indexterm>
- <primary>binary strings</primary>
+ <primary>binary string</primary>
<secondary>concatenation</secondary>
</indexterm>
</entry>
<entry>
Length of binary string
<indexterm>
- <primary>binary strings</primary>
+ <primary>binary string</primary>
<secondary>length</secondary>
</indexterm>
<indexterm>
<primary>length</primary>
- <secondary>binary strings</secondary>
+ <secondary sortas="binary string">of a binary string</secondary>
<see>binary strings, length</see>
</indexterm>
</entry>
<sect2 id="functions-like">
<title><function>LIKE</function></title>
- <indexterm>
- <primary>like</primary>
+ <indexterm zone="functions-like">
+ <primary>LIKE</primary>
</indexterm>
<synopsis>
Regular Expressions</title>
<indexterm zone="functions-sql99-regexp">
- <primary>regular expressions</primary>
+ <primary>regular expression</primary>
<!-- <seealso>pattern matching</seealso> breaks index build -->
</indexterm>
<indexterm>
- <primary>similar to</primary>
+ <primary>SIMILAR TO</primary>
</indexterm>
<indexterm>
<title><acronym>POSIX</acronym> Regular Expressions</title>
<indexterm zone="functions-posix-regexp">
- <primary>regular expressions</primary>
+ <primary>regular expression</primary>
<seealso>pattern matching</seealso>
</indexterm>
<primary>formatting</primary>
</indexterm>
+ <indexterm zone="functions-formatting">
+ <primary>to_char</primary>
+ </indexterm>
+
<para>
The <productname>PostgreSQL</productname> formatting functions
provide a powerful set of tools for converting various data types
</tgroup>
</table>
+ <para>
+ Warning. <literal><function>to_char</function>(<type>interval</type>, <type>text</type>)</literal>
+ is deprecated and should not be used in newly-written code. Will be removed in the next version.
+ </para>
+
<para>
In an output template string (for <function>to_char</>), there are certain patterns that are
recognized and replaced with appropriately-formatted data from the value
<title>Sequence-Manipulation Functions</title>
<indexterm>
- <primary>sequences</primary>
+ <primary>sequence</primary>
</indexterm>
<indexterm>
<primary>nextval</primary>
<title>Conditional Expressions</title>
<indexterm>
- <primary>case</primary>
+ <primary>CASE</primary>
</indexterm>
<indexterm>
- <primary>conditionals</primary>
+ <primary>conditional expression</primary>
</indexterm>
<para>
<sect2>
<title><literal>COALESCE</></title>
+ <indexterm>
+ <primary>COALESCE</primary>
+ </indexterm>
+
<synopsis>
-<function>COALESCE</function>(<replaceable>value</replaceable> <optional>, ...</optional>)
+<function>coalesce</function>(<replaceable>value</replaceable> <optional>, ...</optional>)
</synopsis>
<para>
<indexterm zone="functions-misc">
<primary>configuration</primary>
- <secondary>server</secondary>
+ <secondary sortas="server">of the server</secondary>
+ <tertiary>functions</tertiary>
</indexterm>
<para>
</programlisting>
</para>
+ <indexterm>
+ <primary>privilege</primary>
+ <secondary>querying</secondary>
+ </indexterm>
+
<para>
<xref linkend="functions-misc-access-table"> lists functions that
allow the user to query object access privileges programmatically.
<primary>col_description</primary>
</indexterm>
+ <indexterm zone="functions-misc">
+ <primary>comment</primary>
+ <secondary sortas="database objects">about database objects</secondary>
+ </indexterm>
+
<para>
The function shown in <xref
linkend="functions-misc-comment-table"> extract comments
<para>
<xref linkend="array-operators-table"> shows the operators
- available for the <type>array</type> types.
+ available for <type>array</type> types.
</para>
<table id="array-operators-table">
<entry> <literal>||</literal> </entry>
<entry>array-to-array concatenation</entry>
<entry><literal>ARRAY[1,2,3] || ARRAY[4,5,6]</literal></entry>
- <entry><literal>{{1,2,3},{4,5,6}}</literal></entry>
+ <entry><literal>{1,2,3,4,5,6}</literal></entry>
</row>
<row>
</tgroup>
</table>
+ <para>
+ See <xref linkend="arrays"> for more details about array operator
+ behavior.
+ </para>
+
<para>
<xref linkend="array-functions-table"> shows the functions
available for use with array types. See <xref linkend="arrays">
for <literal>NULL</literal> inputs
</entry>
<entry><literal>array_cat(ARRAY[1,2,3], ARRAY[4,5,6])</literal></entry>
- <entry><literal>{{1,2,3},{4,5,6}}</literal></entry>
+ <entry><literal>{1,2,3,4,5,6}</literal></entry>
</row>
<row>
<entry>
<sect1 id="functions-aggregate">
<title>Aggregate Functions</title>
+ <indexterm zone="functions-aggregate">
+ <primary>aggregate function</primary>
+ <secondary>built-in</secondary>
+ </indexterm>
+
<para>
<firstterm>Aggregate functions</firstterm> compute a single result
value from a set of input values. <xref
<entry>
<indexterm>
<primary>average</primary>
- <secondary>function</secondary>
</indexterm>
<function>avg(<replaceable class="parameter">expression</replaceable>)</function>
</entry>
<title>Subquery Expressions</title>
<indexterm>
- <primary>exists</primary>
+ <primary>EXISTS</primary>
</indexterm>
<indexterm>
- <primary>in</primary>
+ <primary>IN</primary>
</indexterm>
<indexterm>
- <primary>not in</primary>
+ <primary>NOT IN</primary>
</indexterm>
<indexterm>
- <primary>any</primary>
+ <primary>ANY</primary>
</indexterm>
<indexterm>
- <primary>all</primary>
+ <primary>ALL</primary>
</indexterm>
<indexterm>
- <primary>some</primary>
+ <primary>SOME</primary>
</indexterm>
<indexterm>
- <primary>subqueries</primary>
+ <primary>subquery</primary>
</indexterm>
<para>
<sect2>
<title>Row-wise Comparison</title>
+ <indexterm>
+ <primary>comparison</primary>
+ <secondary>of rows</secondary>
+ </indexterm>
+
<synopsis>
(<replaceable>expression</replaceable> <optional>, <replaceable>expression</replaceable> ...</optional>) <replaceable>operator</replaceable> (<replaceable>subquery</replaceable>)
</synopsis>
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/indices.sgml,v 1.42 2003/05/28 16:03:55 tgl Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/indices.sgml,v 1.42.2.1 2003/09/07 04:36:41 momjian Exp $ -->
<chapter id="indexes">
<title id="indexes-title">Indexes</title>
<indexterm zone="indexes">
- <primary>indexes</primary>
+ <primary>index</primary>
</indexterm>
<para>
B-tree, R-tree, GiST, and Hash. Each index type is more appropriate for
a particular query type because of the algorithm it uses.
<indexterm>
- <primary>indexes</primary>
+ <primary>index</primary>
<secondary>B-tree</secondary>
</indexterm>
<indexterm>
<primary>B-tree</primary>
- <see>indexes</see>
+ <see>index</see>
</indexterm>
By
default, the <command>CREATE INDEX</command> command will create a
<para>
<indexterm>
- <primary>indexes</primary>
+ <primary>index</primary>
<secondary>R-tree</secondary>
</indexterm>
<indexterm>
<primary>R-tree</primary>
- <see>indexes</see>
+ <see>index</see>
</indexterm>
R-tree indexes are especially suited for spatial data. To create
an R-tree index, use a command of the form
<para>
<indexterm>
- <primary>indexes</primary>
+ <primary>index</primary>
<secondary>hash</secondary>
</indexterm>
<indexterm>
<primary>hash</primary>
- <see>indexes</see>
+ <see>index</see>
</indexterm>
The query planner will consider using a hash index whenever an
indexed column is involved in a comparison using the
<title>Multicolumn Indexes</title>
<indexterm zone="indexes-multicolumn">
- <primary>indexes</primary>
+ <primary>index</primary>
<secondary>multicolumn</secondary>
</indexterm>
<title>Unique Indexes</title>
<indexterm zone="indexes-unique">
- <primary>indexes</primary>
+ <primary>index</primary>
<secondary>unique</secondary>
</indexterm>
<title>Indexes on Expressions</title>
<indexterm zone="indexes-expressional">
- <primary>indexes</primary>
- <secondary>on expressions</secondary>
+ <primary>index</primary>
+ <secondary sortas="expressions">on expressions</secondary>
</indexterm>
<para>
<sect1 id="indexes-opclass">
<title>Operator Classes</title>
+ <indexterm zone="indexes-opclass">
+ <primary>operator class</primary>
+ </indexterm>
+
<para>
An index definition may specify an <firstterm>operator
class</firstterm> for each column of an index.
<title>Partial Indexes</title>
<indexterm zone="indexes-partial">
- <primary>indexes</primary>
+ <primary>index</primary>
<secondary>partial</secondary>
</indexterm>
<sect1 id="indexes-examine">
<title>Examining Index Usage</title>
+ <indexterm zone="indexes-examine">
+ <primary>index</primary>
+ <secondary>examining usage</secondary>
+ </indexterm>
+
<para>
Although indexes in <productname>PostgreSQL</> do not need
maintenance and tuning, it is still important to check
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/installation.sgml,v 1.138 2003/08/04 04:03:03 tgl Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/installation.sgml,v 1.138.2.1 2003/09/07 04:36:41 momjian Exp $ -->
<chapter id="installation">
<title><![%standalone-include[<productname>PostgreSQL</>]]>
<listitem>
<para>
- To build the Python interface module or the PL/Python server
- programming language, you need a Python installation, including
- the header files.
- Since PL/Python will be a shared library, the
+ To build the PL/Python server programming language, you need a
+ Python installation, including the header files. Since
+ PL/Python will be a shared library, the
<indexterm><primary>libpython</primary></indexterm>
<filename>libpython</filename> library must be a shared library
also on most platforms. This is not the case in a default
<para>
<indexterm>
<primary>pg_dumpall</primary>
+ <secondary>use during upgrade</secondary>
</indexterm>
To back up your database installation, type:
<term><option>--with-python</option></term>
<listitem>
<para>
- Build the Python interface module and the PL/Python
- server-side language. You need to have root access to be able
- to install the Python module at its default place
- (<filename>/usr/lib/python<replaceable>x</>.<replaceable>y</></>).
+ Build the PL/Python server-side language.
</para>
</listitem>
</varlistentry>
<term><option>--with-pam</option></term>
<listitem>
<para>
- Build with <acronym>PAM</> (Pluggable Authentication Modules)
- support.
+ Build with <acronym>PAM</><indexterm><primary>PAM</></>
+ (Pluggable Authentication Modules) support.
</para>
</listitem>
</varlistentry>
possibly can, you will have to do manual work.
</para>
- <para>
- If you built the Python interfaces and you were not the
- root user when you executed the above command then that part of
- the installation probably failed. In that case you should become
- the root user and then do
-<screen>
-<userinput>gmake -C src/interfaces/python install</userinput>
-</screen>
- If you do not have root access you are on your own:
- you can still take the required files and place them in
- other directories where Python can find them, but how to
- do that is left as an exercise.
- </para>
-
<para>
The standard installation provides only the header files needed for client
application development. If you plan to do any server-side program
<title>Shared Libraries</title>
<indexterm>
- <primary>shared libraries</primary>
+ <primary>shared library</primary>
</indexterm>
<para>
<para>
<indexterm>
<primary><envar>MANPATH</envar></primary>
- <seealso>man pages</seealso>
</indexterm>
To enable your system to find the <application>man</>
documentation, you need to add lines like the following to a
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/Attic/jdbc.sgml,v 1.47 2003/08/07 05:06:40 barry Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/Attic/jdbc.sgml,v 1.47.2.1 2003/09/07 04:36:42 momjian Exp $
-->
<chapter id="jdbc">
<title><acronym>JDBC</acronym> Interface</title>
+ <indexterm zone="jdbc">
+ <primary>JDBC</primary>
+ </indexterm>
+
+ <indexterm zone="jdbc">
+ <primary>Java</primary>
+ </indexterm>
+
<para>
<acronym>JDBC</acronym> is a core <acronym>API</acronym> of Java 1.1 and later.
It provides a standard set of
<sect2 id="jdbc-classpath">
<title>Setting up the Class Path</title>
+ <indexterm zone="jdbc-classpath">
+ <primary>class path</primary>
+ </indexterm>
+
+ <indexterm zone="jdbc-classpath">
+ <primary>CLASSPATH</primary>
+ </indexterm>
+
<para>
To use the driver, the JAR archive (named
<filename>postgresql.jar</filename> if you built from source, otherwise
<sect1 id="jdbc-query">
<title>Issuing a Query and Processing the Result</title>
+ <indexterm zone="jdbc-query">
+ <primary>Statement</primary>
+ </indexterm>
+
+ <indexterm zone="jdbc-query">
+ <primary>PreparedStatement</primary>
+ </indexterm>
+
+ <indexterm zone="jdbc-query">
+ <primary>ResultSet</primary>
+ </indexterm>
+
<para>
Any time you want to issue <acronym>SQL</acronym> statements to
the database, you require a <classname>Statement</classname> or
<sect1 id="jdbc-binary-data">
<title>Storing Binary Data</title>
+ <indexterm zone="jdbc-binary-data">
+ <primary>bytea</primary>
+ <secondary sortas="JDBC">in JDBC</secondary>
+ </indexterm>
+
+ <indexterm zone="jdbc-binary-data">
+ <primary>large object</primary>
+ <secondary sortas="JDBC">in JDBC</secondary>
+ </indexterm>
+
<para>
<application>PostgreSQL</application> provides two distinct ways to
store binary data. Binary data can be stored in a table using
<sect1 id="jdbc-thread">
<title>Using the Driver in a Multithreaded or a Servlet Environment</title>
+ <indexterm zone="jdbc-thread">
+ <primary>threads</primary>
+ <secondary sortas="JDBC">with JDBC</secondary>
+ </indexterm>
+
<para>
A problem with many <acronym>JDBC</acronym> drivers is that only
one thread can use a <classname>Connection</classname> at any one
<sect1 id="jdbc-datasource">
<title>Connection Pools and Data Sources</title>
+ <indexterm zone="jdbc-datasource">
+ <primary>connection pool</primary>
+ <secondary sortas="JDBC">in JDBC</secondary>
+ </indexterm>
+
+ <indexterm zone="jdbc-datasource">
+ <primary>DataSource</primary>
+ </indexterm>
+
<para>
<acronym>JDBC</> 2 introduced standard connection pooling features in an
add-on <acronym>API</> known as the <acronym>JDBC</acronym> 2.0 Optional
</sect2>
<sect2 id="jdbc-jndi">
- <title>Data Sources and <acronym>JNDI</acronym></title>
+ <title>Data Sources and <acronym>JNDI</acronym></title>
+
+ <indexterm zone="jdbc-jndi">
+ <primary>JNDI</primary>
+ </indexterm>
<para>
All the <literal>ConnectionPoolDataSource</literal> and
-<!-- $Header: /cvsroot/pgsql/doc/src/sgml/keywords.sgml,v 2.9 2003/06/12 07:49:43 momjian Exp $ -->
+<!-- $Header: /cvsroot/pgsql/doc/src/sgml/keywords.sgml,v 2.9.2.1 2003/09/07 04:36:42 momjian Exp $ -->
<appendix id="sql-keywords-appendix">
<title><acronym>SQL</acronym> Key Words</title>
<indexterm zone="sql-keywords-appendix">
- <primary>key words</primary>
+ <primary>key word</primary>
<secondary>list of</secondary>
</indexterm>
<para>
The <function>pg_lo_*</function> commands are interfaces to the
large object features of
- <ProductName>PostgreSQL</ProductName>.<indexterm><primary>Large
- Object</></> The functions are designed to mimic the analogous file
+ <ProductName>PostgreSQL</ProductName>.<indexterm><primary>large
+ object</><secondary>in pgctl</></> The functions are designed to mimic the analogous file
system functions in the standard Unix file system interface. The
<function>pg_lo_*</function> commands should be used within a
<command>BEGIN</command>/<command>COMMIT</command> transaction
message bearing the given name arrives from the server. This
occurs when any <productname>PostgreSQL</productname> client
application issues a
- <command>NOTIFY</command><indexterm><primary>NOTIFY</><secondary>in
- pgtcl</></> command referencing that name. The command string is
- executed from the Tcl idle loop. That is the normal idle state of
- an application written with Tk. In non-Tk Tcl shells, you can
- execute <function>update</function> or <function>vwait</function>
- to cause the idle loop to be entered.
+ <command>NOTIFY</command><indexterm><primary>NOTIFY</><secondary
+ sortas="pgtcl">in pgtcl</></> command referencing that name. The
+ command string is executed from the Tcl idle loop. That is the
+ normal idle state of an application written with Tk. In non-Tk Tcl
+ shells, you can execute <function>update</function> or
+ <function>vwait</function> to cause the idle loop to be entered.
</para>
<para>
<!--
-$Header: /cvsroot/pgsql/doc/src/sgml/libpq.sgml,v 1.131 2003/08/13 16:29:03 tgl Exp $
+$Header: /cvsroot/pgsql/doc/src/sgml/libpq.sgml,v 1.131.2.1 2003/09/07 04:36:42 momjian Exp $
-->
<chapter id="libpq">
<primary>libpq</primary>
</indexterm>
+ <indexterm zone="libpq">
+ <primary>C</primary>
+ </indexterm>
+
<para>
<application>libpq</application> is the <acronym>C</acronym>
application programmer's interface to
</para>
<para>
- Client programs that use <application>libpq</application> must include the
- header file <filename>libpq-fe.h</filename> and must link with the
- <application>libpq</application> library.
+ Client programs that use <application>libpq</application> must
+ include the header file
+ <filename>libpq-fe.h</filename><indexterm><primary>libpq-fe.h</></>
+ and must link with the <application>libpq</application> library.
</para>
<sect1 id="libpq-connect">
application program can have several backend connections open at
one time. (One reason to do that is to access more than one
database.) Each connection is represented by a
- <structname>PGconn</> object which is obtained from the function
- <function>PQconnectdb</> or <function>PQsetdbLogin</>. Note that
- these functions will always return a non-null object pointer,
- unless perhaps there is too little memory even to allocate the
- <structname>PGconn</> object. The <function>PQstatus</> function
- should be called to check whether a connection was successfully
- made before queries are sent via the connection object.
+ <structname>PGconn</><indexterm><primary>PGconn</></> object which
+ is obtained from the function <function>PQconnectdb</> or
+ <function>PQsetdbLogin</>. Note that these functions will always
+ return a non-null object pointer, unless perhaps there is too
+ little memory even to allocate the <structname>PGconn</> object.
+ The <function>PQstatus</> function should be called to check
+ whether a connection was successfully made before queries are sent
+ via the connection object.
<variablelist>
<varlistentry>
- <term><function>PQconnectdb</function></term>
+ <term><function>PQconnectdb</function><indexterm><primary>PQconnectdb</></></term>
<listitem>
<para>
Makes a new connection to the database server.
<term><literal>host</literal></term>
<listitem>
<para>
- Name of host to connect to.
- If this begins with a slash, it specifies Unix-domain communication
- rather than TCP/IP communication; the value is the name of the
- directory in which the socket file is stored.
- The default is to connect to a Unix-domain socket in
- <filename>/tmp</filename>.
+ Name of host to connect to.<indexterm><primary>host name</></>
+ If this begins with a slash, it specifies Unix-domain
+ communication rather than TCP/IP communication; the value is the
+ name of the directory in which the socket file is stored. The
+ default is to connect to a Unix-domain socket in
+ <filename>/tmp</filename>.<indexterm><primary>Unix domain
+ socket</></>
</para>
</listitem>
</varlistentry>
<term><literal>port</literal></term>
<listitem>
<para>
- Port number to connect to at the server host,
- or socket file name extension for Unix-domain connections.
+ Port number to connect to at the server host, or socket file
+ name extension for Unix-domain
+ connections.<indexterm><primary>port</></>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><literal>sslmode</literal></term>
<listitem>
- <para>
- This option determines whether or with what priority an <acronym>SSL</>
- connection will be negotiated with the server. There are four
- modes: <literal>disable</> will attempt only an unencrypted
- <acronym>SSL</> connection; <literal>allow</> will negotiate,
- trying first a non-<acronym>SSL</> connection, then if that fails,
- trying an <acronym>SSL</> connection; <literal>prefer</>
- (the default) will negotiate, trying first an <acronym>SSL</> connection,
- then if that fails, trying a regular non-<acronym>SSL</> connection;
- <literal>require</> will try only an <acronym>SSL</> connection.
- </para>
- <para>
- If <productname>PostgreSQL</> is compiled without SSL support,
- using option <literal>require</> will cause an error, and options
- <literal>allow</> and <literal>prefer</> will be tolerated but
- <application>libpq</> will be unable to negotiate an <acronym>SSL</>
- connection.
- </para>
+ <para>
+ This option determines whether or with what priority an
+ <acronym>SSL</> connection will be negotiated with the
+ server. There are four modes: <literal>disable</> will attempt
+ only an unencrypted <acronym>SSL</> connection;
+ <literal>allow</> will negotiate, trying first a
+ non-<acronym>SSL</> connection, then if that fails, trying an
+ <acronym>SSL</> connection; <literal>prefer</> (the default)
+ will negotiate, trying first an <acronym>SSL</> connection,
+ then if that fails, trying a regular non-<acronym>SSL</>
+ connection; <literal>require</> will try only an
+ <acronym>SSL</> connection.
+ </para>
+
+ <para>
+ If <productname>PostgreSQL</> is compiled without SSL support,
+ using option <literal>require</> will cause an error, and
+ options <literal>allow</> and <literal>prefer</> will be
+ tolerated but <application>libpq</> will be unable to negotiate
+ an <acronym>SSL</>
+ connection.<indexterm><primary>SSL</><secondary
+ sortas="libpq">with libpq</></indexterm>
+ </para>
</listitem>
</varlistentry>
<varlistentry>
<term><literal>requiressl</literal></term>
<listitem>
- <para>
- This option is deprecated in favor of the <literal>sslmode</>
- setting.
- </para>
- <para>
- If set to 1, an <acronym>SSL</acronym> connection to the server is required
- (this is equivalent to <literal>sslmode</> <literal>require</>).
- <application>libpq</> will then refuse to connect if the server does not
- accept an <acronym>SSL</acronym> connection.
- If set to 0 (default), <application>libpq</> will negotiate the connection
- type with the server (equivalent to <literal>sslmode</> <literal>prefer</>).
- This option is only available if
- <productname>PostgreSQL</> is compiled with SSL support.
- </para>
+ <para>
+ This option is deprecated in favor of the <literal>sslmode</>
+ setting.
+ </para>
+
+ <para>
+ If set to 1, an <acronym>SSL</acronym> connection to the server
+ is required (this is equivalent to <literal>sslmode</>
+ <literal>require</>). <application>libpq</> will then refuse
+ to connect if the server does not accept an
+ <acronym>SSL</acronym> connection. If set to 0 (default),
+ <application>libpq</> will negotiate the connection type with
+ the server (equivalent to <literal>sslmode</>
+ <literal>prefer</>). This option is only available if
+ <productname>PostgreSQL</> is compiled with SSL support.
+ </para>
</listitem>
</varlistentry>
</varlistentry>
<varlistentry>
- <term><function>PQsetdbLogin</function></term>
+ <term><function>PQsetdbLogin</function><indexterm><primary>PQsetdbLogin</></></term>
<listitem>
<para>
Makes a new connection to the database server.
</varlistentry>
<varlistentry>
- <term><function>PQsetdb</function></term>
+ <term><function>PQsetdb</function><indexterm><primary>PQsetdb</></></term>
<listitem>
<para>
Makes a new connection to the database server.
</varlistentry>
<varlistentry>
- <term><function>PQconnectStart</function></term>
- <term><function>PQconnectPoll</function></term>
+ <term><function>PQconnectStart</function><indexterm><primary>PQconnectStart</></></term>
+ <term><function>PQconnectPoll</function><indexterm><primary>PQconnectPoll</></></term>
<listitem>
<para>
<indexterm><primary>nonblocking connection</primary></indexterm>
</varlistentry>
<varlistentry>
- <term><function>PQconndefaults</function></term>
+ <term><function>PQconndefaults</function><indexterm><primary>PQconndefaults</></></term>
<listitem>
<para>
Returns the default connection options.
</varlistentry>
<varlistentry>
- <term><function>PQfinish</function></term>
+ <term><function>PQfinish</function><indexterm><primary>PQfinish</></></term>
<listitem>
<para>
Closes the connection to the server. Also frees
</varlistentry>
<varlistentry>
- <term><function>PQreset</function></term>
+ <term><function>PQreset</function><indexterm><primary>PQreset</></></term>
<listitem>
<para>
Resets the communication channel to the server.
</varlistentry>
<varlistentry>
- <term><function>PQresetStart</function></term>
- <term><function>PQresetPoll</function></term>
+ <term><function>PQresetStart</function><indexterm><primary>PQresetStart</></></term>
+ <term><function>PQresetPoll</function><indexterm><primary>PQresetPoll</></></term>
<listitem>
<para>
Reset the communication channel to the server, in a nonblocking manner.
<variablelist>
<varlistentry>
-<term><function>PQdb</function></term>
+<term><function>PQdb</function><indexterm><primary>PQdb</></></term>
<listitem>
<para>
Returns the database name of the connection.
</varlistentry>
<varlistentry>
-<term><function>PQuser</function></term>
+<term><function>PQuser</function><indexterm><primary>PQuser</></></term>
<listitem>
<para>
Returns the user name of the connection.
</varlistentry>
<varlistentry>
-<term><function>PQpass</function></term>
+<term><function>PQpass</function><indexterm><primary>PQpass</></></term>
<listitem>
<para>
Returns the password of the connection.
</varlistentry>
<varlistentry>
-<term><function>PQhost</function></term>
+<term><function>PQhost</function><indexterm><primary>PQhost</></></term>
<listitem>
<para>
Returns the server host name of the connection.
</varlistentry>
<varlistentry>
-<term><function>PQport</function></term>
+<term><function>PQport</function><indexterm><primary>PQport</></></term>
<listitem>
<para>
Returns the port of the connection.
</varlistentry>
<varlistentry>
-<term><function>PQtty</function></term>
+<term><function>PQtty</function><indexterm><primary>PQtty</></></term>
<listitem>
<para>
Returns the debug <acronym>TTY</acronym> of the connection.
- (This is obsolete, since the server no longer pays attention
- to the <acronym>TTY</acronym> setting, but the function remains
- for backwards compatibility.)
+ (This is obsolete, since the server no longer pays attention
+
to the <acronym>TTY</acronym> setting, but the function remains
+ for backwards compatibility.)
<synopsis>
char *PQtty(const PGconn *conn);
</synopsis>
</varlistentry>
<varlistentry>
-<term><function>PQoptions</function></term>
+<term><function>PQoptions</function><indexterm><primary>PQoptions</></></term>
<listitem>
<para>
Returns the command-line options passed in the connection request.
<variablelist>
<varlistentry>
-<term><function>PQstatus</function></term>
+<term><function>PQstatus</function><indexterm><primary>PQstatus</></></term>
<listitem>
<para>
Returns the status of the connection.
</varlistentry>
<varlistentry>
-<term><function>PQtransactionStatus</function></term>
+<term><function>PQtransactionStatus</function><indexterm><primary>PQtransactionStatus</></></term>
<listitem>
<para>
Returns the current in-transaction status of the server.
</varlistentry>
<varlistentry>
-<term><function>PQparameterStatus</function></term>
+<term><function>PQparameterStatus</function><indexterm><primary>PQparameterStatus</></></term>
<listitem>
<para>
Looks up a current parameter setting of the server.
<para>
Parameters reported as of the current release include
<literal>server_version</> (cannot change after startup);
-<literal>server_encoding</> (also not presently changeable after start);
<literal>client_encoding</>,
-<literal>is_superuser</>, and
+<literal>is_superuser</>,
+<literal>session_authorization</literal>, and
<literal>DateStyle</>.
</para>
<para>
-Pre-3.0-protocol servers do not report parameter settings,
-but <application>libpq</> includes logic to obtain values for
-<literal>server_version</>, <literal>server_encoding</>, and
-<literal>client_encoding</>. Applications are encouraged to use
-<function>PQparameterStatus</> rather than ad-hoc code to determine these
-values. (Beware however that on a pre-3.0 connection, changing
-<literal>client_encoding</> via <command>SET</> after connection startup
-will not be reflected by <function>PQparameterStatus</>.)
+Pre-3.0-protocol servers do not report parameter settings, but
+<application>libpq</> includes logic to obtain values for
+<literal>server_version</>, and <literal>client_encoding</>.
+Applications are encouraged to use <function>PQparameterStatus</>
+rather than ad-hoc code to determine these values. (Beware however
+that on a pre-3.0 connection, changing <literal>client_encoding</> via
+<command>SET</> after connection startup will not be reflected by
+<function>PQparameterStatus</>.)
</para>
</listitem>
</varlistentry>
<varlistentry>
-<term><function>PQprotocolVersion</function></term>
+<term><function>PQprotocolVersion</function><indexterm><primary>PQprotocolVersion</></></term>
<listitem>
<para>
Interrogates the frontend/backend protocol being used.
</varlistentry>
<varlistentry>
- <term><function>PQerrorMessage</function></term>
+ <term><function>PQerrorMessage</function><indexterm><primary>PQerrorMessage</></></term>
<listitem>
<para>
<indexterm><primary>error message</></>
</varlistentry>
<varlistentry>
- <term><function>PQsocket</function></term>
+ <term><function>PQsocket</function><indexterm><primary>PQsocket</></></term>
<listitem>
<para>
Obtains the file descriptor number of the connection socket to
</varlistentry>
<varlistentry>
- <term><function>PQbackendPID</function></term>
+ <term><function>PQbackendPID</function><indexterm><primary>PQbackendPID</></></term>
<listitem>
<para>
- Returns the process <acronym>ID</acronym> of the backend server process
- handling this connection.
+ Returns the process <acronym>ID</acronym>
+ (PID)<indexterm><primary>PID</><secondary>determining PID of
+ server process</><tertiary>in libpq</></> of the backend server
+ process handling this connection.
<synopsis>
int PQbackendPID(const PGconn *conn);
</synopsis>
</varlistentry>
<varlistentry>
- <term><function>PQgetssl</function></term>
+ <term><function>PQgetssl</function><indexterm><primary>PQgetssl</></></term>
<listitem>
<para>
- <indexterm><primary>SSL</></>
+ <indexterm><primary>SSL</><secondary sortas="libpq">in libpq</secondary></indexterm>
Returns the SSL structure used in the connection, or null
if SSL is not in use.
<synopsis>
<para>
<variablelist>
<varlistentry>
-<term><function>PQexec</function></term>
+<term><function>PQexec</function><indexterm><primary>PQexec</></></term>
<listitem>
<para>
Submits a command to the server
out-of-memory conditions or serious errors such as inability
to send the command to the server.
If a null pointer is returned, it
- should be treated like a <symbol>PGRES_FATAL_ERROR</symbol> result. Use
- <function>PQerrorMessage</function> to get more information about the error.
+ should be treated like a <symbol>PGRES_FATAL_ERROR</symbol> result. Use
+ <function>PQerrorMessage</function> to get more information about the error.
</para>
</listitem>
</varlistentry>
<para>
<variablelist>
<varlistentry>
-<term><function>PQexecParams</function></term>
+<term><function>PQexecParams</function><indexterm><primary>PQexecParams</></></term>
<listitem>
<para>
Submits a command to the server and waits for the result,
- with the ability to pass parameters separately from the SQL
- command text.
+ with the ability to pass parameters separately from the SQL
+ command text.
<synopsis>
PGresult *PQexecParams(PGconn *conn,
const char *command,
<para>
<variablelist>
<varlistentry>
-<term><function>PQexecPrepared</function></term>
+<term><function>PQexecPrepared</function><indexterm><primary>PQexecPrepared</></></term>
<listitem>
<para>
Sends a request to execute a prepared statement with given
- parameters, and waits for the result.
+ parameters, and waits for the result.
<synopsis>
PGresult *PQexecPrepared(PGconn *conn,
const char *stmtName,
</para>
<para>
-The <structname>PGresult</structname> structure encapsulates the result
-returned by the server.
-<application>libpq</application> application programmers should be careful to
-maintain the <structname>PGresult</structname> abstraction. Use the accessor functions below to get
-at the contents of <structname>PGresult</structname>. Avoid directly referencing the fields of the
-<structname>PGresult</structname> structure because they are subject to change in the future.
+The
+<structname>PGresult</structname><indexterm><primary>PGresult</></>
+structure encapsulates the result returned by the server.
+<application>libpq</application> application programmers should be
+careful to maintain the <structname>PGresult</structname> abstraction.
+Use the accessor functions below to get at the contents of
+<structname>PGresult</structname>. Avoid directly referencing the
+fields of the <structname>PGresult</structname> structure because they
+are subject to change in the future.
<variablelist>
<varlistentry>
-<term><function>PQresultStatus</function></term>
+<term><function>PQresultStatus</function><indexterm><primary>PQresultStatus</></></term>
<listitem>
<para>
Returns the result status of the command.
</varlistentry>
<varlistentry>
-<term><function>PQresStatus</function></term>
+<term><function>PQresStatus</function><indexterm><primary>PQresStatus</></></term>
<listitem>
<para>
- Converts the enumerated type returned by <function>PQresultStatus</> into
- a string constant describing the status code.
+ Converts the enumerated type returned by <function>PQresultStatus</> into
+ a string constant describing the status code.
<synopsis>
char *PQresStatus(ExecStatusType status);
</synopsis>
</varlistentry>
<varlistentry>
-<term><function>PQresultErrorMessage</function></term>
+<term><function>PQresultErrorMessage</function><indexterm><primary>PQresultErrorMessage</></></term>
<listitem>
<para>
Returns the error message associated with the command, or an empty string
</varlistentry>
<varlistentry>
-<term><function>PQresultErrorField</function></term>
+<term><function>PQresultErrorField</function><indexterm><primary>PQresultErrorField</></></term>
<listitem>
<para>
Returns an individual field of an error report.
<synopsis>
char *PQresultErrorField(const PGresult *res, int fieldcode);
</synopsis>
-<parameter>fieldcode</> is an error field identifier defined by the
-<productname>PostgreSQL</> protocol (see <xref
-linkend="protocol-error-fields">), for example <literal>'C'</> for
-the SQLSTATE error code. NULL is returned if the
+<parameter>fieldcode</> is an error field identifier; see the symbols
+listed below. <symbol>NULL</symbol> is returned if the
<structname>PGresult</structname> is not an error or warning result,
or does not include the specified field. Field values will normally
not include a trailing newline.
</para>
<para>
-Errors generated internally by libpq will have severity and primary message,
-but typically no other fields. Errors returned by a pre-3.0-protocol server
-will include severity and primary message, and sometimes a detail message,
-but no other fields.
+The following field codes are available:
+<variablelist>
+
+<varlistentry>
+<term><symbol>PG_DIAG_SEVERITY</></term>
+<listitem>
+<para>
+The severity; the field contents are <literal>ERROR</>,
+<literal>FATAL</>, or <literal>PANIC</> (in an error message), or
+<literal>WARNING</>, <literal>NOTICE</>, <literal>DEBUG</>,
+<literal>INFO</>, or <literal>LOG</> (in a notice message), or a
+localized translation of one of these. Always present.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_SQLSTATE</>
+</term>
+<listitem>
+<para>
+The SQLSTATE code for the error (a 5-character string following SQL
+spec conventions). Not localizable. Always present.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_MESSAGE_PRIMARY</></term>
+<listitem>
+<para>
+The primary human-readable error message (typically one line). Always
+present.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_MESSAGE_DETAIL</></term>
+<listitem>
+<para>
+Detail: an optional secondary error message carrying more detail about
+the problem. May run to multiple lines.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_MESSAGE_HINT</></term>
+<listitem>
+<para>
+Hint: an optional suggestion what to do about the problem. This is
+intended to differ from detail in that it offers advice (potentially
+inappropriate) rather than hard facts. May run to multiple lines.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_STATEMENT_POSITION</></term>
+<listitem>
+<para>
+A string containing a decimal integer indicating an error cursor
+position as an index into the original statement string. The first
+character has index 1, and positions are measured in characters not
+bytes.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_CONTEXT</></term>
+<listitem>
+<para>
+An indication of the context in which the error occurred. Presently
+this includes a call stack traceback of active PL functions. The
+trace is one entry per line, most recent first.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_SOURCE_FILE</></term>
+<listitem>
+<para>
+The file name of the source-code location where the error was
+reported.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_SOURCE_LINE</></term>
+<listitem>
+<para>
+The line number of the source-code location where the error was
+reported.
+</para>
+</listitem>
+</varlistentry>
+
+<varlistentry>
+<term><symbol>PG_DIAG_SOURCE_FUNCTION</></term>
+<listitem>
+<para>
+The name of the source-code function reporting the error.
+</para>
+</listitem>
+</varlistentry>
+</variablelist>
+</para>
+
+<para>
+The client is responsible for formatting displayed information to meet
+its needs; in particular it should break long lines as needed.
+Newline characters appearing in the error message fields should be
+treated as paragraph breaks, not line breaks.
+</para>
+
+<para>
+Errors generated internally by <application>libpq</application> will
+have severity and primary message, but typically no other fields.
+Errors returned by a pre-3.0-protocol server will include severity and
+primary message, and sometimes a detail message, but no other fields.
</para>
<para>
</varlistentry>
<varlistentry>
-<term><function>PQclear</function></term>
+<term><function>PQclear</function><indexterm><primary>PQclear</></></term>
<listitem>
<para>
Frees the storage associated with a <structname>PGresult</structname>.
</varlistentry>
<varlistentry>
-<term><function>PQmakeEmptyPGresult</function></term>
+<term><function>PQmakeEmptyPGresult</function><indexterm><primary>PQmakeEmptyPGresult</></></term>
<listitem>
<para>
Constructs an empty <structname>PGresult</structname> object with the given status.
<variablelist>
<varlistentry>
-<term><function>PQntuples</function></term>
+<term><function>PQntuples</function><indexterm><primary>PQntuples</></></term>
<listitem>
<para>
Returns the number of rows (tuples)
</varlistentry>
<varlistentry>
-<term><function>PQnfields</function></term>
+<term><function>PQnfields</function><indexterm><primary>PQnfields</></></term>
<listitem>
<para>
Returns the number of columns (fields)
</varlistentry>
<varlistentry>
-<term><function>PQfname</function></term>
+<term><function>PQfname</function><indexterm><primary>PQfname</></></term>
<listitem>
<para>
Returns the column name associated with the given column number.
</varlistentry>
<varlistentry>
-<term><function>PQfnumber</function></term>
+<term><function>PQfnumber</function><indexterm><primary>PQfnumber</></></term>
<listitem>
<para>
Returns the column number
</varlistentry>
<varlistentry>
-<term><function>PQftable</function></term>
+<term><function>PQftable</function><indexterm><primary>PQftable</></></term>
<listitem>
<para>
Returns the OID of the table from which the given column was fetched.
</varlistentry>
<varlistentry>
-<term><function>PQftablecol</function></term>
+<term><function>PQftablecol</function><indexterm><primary>PQftablecol</></></term>
<listitem>
<para>
Returns the column number (within its table) of the column making up
</varlistentry>
<varlistentry>
-<term><function>PQfformat</function></term>
+<term><function>PQfformat</function><indexterm><primary>PQfformat</></></term>
<listitem>
<para>
Returns the format code indicating the format of the given column.
</varlistentry>
<varlistentry>
-<term><function>PQftype</function></term>
+<term><function>PQftype</function><indexterm><primary>PQftype</></></term>
<listitem>
<para>
Returns the data type associated with the
</varlistentry>
<varlistentry>
-<term><function>PQfmod</function></term>
+<term><function>PQfmod</function><indexterm><primary>PQfmod</></></term>
<listitem>
<para>
Returns the type modifier of the column
</varlistentry>
<varlistentry>
-<term><function>PQfsize</function></term>
+<term><function>PQfsize</function><indexterm><primary>PQfsize</></></term>
<listitem>
<para>
Returns the size in bytes of the column
projects / users / hanada / postgres.git / commitdiff