Dose–response relationship

(Redirected from Dose response curve)

The dose–response relationship, or exposure–response relationship, describes the magnitude of the response of an organism, as a function of exposure (or doses) to a stimulus or stressor (usually a chemical) after a certain exposure time.[1] Dose–response relationships can be described by dose–response curves. This is explained further in the following sections. A stimulus response function or stimulus response curve is defined more broadly as the response from any type of stimulus, not limited to chemicals.

A dose response curve showing the normalised tissue response to stimulation by an agonist. Low doses are insufficient to generate a response, while high doses generate a maximal response. The steepest point of the curve corresponds with an EC50 of 0.7 molar

Motivation for studying dose–response relationships

edit

Studying dose response, and developing dose–response models, is central to determining "safe", "hazardous" and (where relevant) beneficial levels and dosages for drugs, pollutants, foods, and other substances to which humans or other organisms are exposed. These conclusions are often the basis for public policy. The U.S. Environmental Protection Agency has developed extensive guidance and reports on dose–response modeling and assessment, as well as software.[2] The U.S. Food and Drug Administration also has guidance to elucidate dose–response relationships[3] during drug development. Dose response relationships may be used in individuals or in populations. The adage The dose makes the poison reflects how a small amount of a toxin has no significant effect, while a large amount may be fatal. This reflects how dose–response relationships can be used in individuals. In populations, dose–response relationships can describe the way groups of people or organisms are affected at different levels of exposure. Dose response relationships modelled by dose response curves are used extensively in pharmacology and drug development. In particular, the shape of a drug's dose–response curve (quantified by EC50, nH and ymax parameters) reflects the biological activity and strength of the drug.

Example stimuli and responses

edit

Some example measures for dose–response relationships are shown in the tables below. Each sensory stimulus corresponds with a particular sensory receptor, for instance the nicotinic acetylcholine receptor for nicotine, or the mechanoreceptor for mechanical pressure. However, stimuli (such as temperatures or radiation) may also affect physiological processes beyond sensation (and even give the measurable response of death). Responses can be recorded as continuous data (e.g. force of muscle contraction) or discrete data (e.g. number of deaths).

Example Stimulus Target
Drug/Toxin dose Agonist
(e.g. nicotine, isoprenaline)
Biochemical receptors,
Enzymes,
Transporters
Antagonist
(e.g. ketamine, propranolol)
Allosteric modulator
(e.g. Benzodiazepine)
Temperature Temperature receptors
Sound levels Hair cells
Illumination/Light intensity Photoreceptors
Mechanical pressure Mechanoreceptors
Pathogen dose (e.g. LPS) n/a
Radiation intensity n/a
System Level Example Response
Population (Epidemiology) Death,[4] loss of consciousness
Organism/Whole animal (Physiology) Severity of lesion,[4] blood pressure,[4] heart rate, extent of movement, attentiveness, EEG data
Organ/Tissue ATP production, proliferation, muscle contraction, bile production, cell death
Cell (Cell biology, Biochemistry) ATP production, calcium signals, morphology, mitosis

Analysis and creation of dose–response curves

edit
 
Semi-log plots of the hypothetical response to agonist, log concentration on the x-axis, in combination with different antagonist concentrations. The parameters of the curves, and how the antagonist changes them, gives useful information about the agonist's pharmacological profile. This curve is similar but distinct from that, which is generated with the ligand-bound receptor concentration on the y-axis.

Construction of dose–response curves

edit

A dose–response curve is a coordinate graph relating the magnitude of a dose (stimulus) to the response of a biological system. A number of effects (or endpoints) can be studied. The applied dose is generally plotted on the X axis and the response is plotted on the Y axis. In some cases, it is the logarithm of the dose that is plotted on the X axis. The curve is typically sigmoidal, with the steepest portion in the middle. Biologically based models using dose are preferred over the use of log(dose) because the latter can visually imply a threshold dose when in fact there is none.[citation needed]

Statistical analysis of dose–response curves may be performed by regression methods such as the probit model or logit model, or other methods such as the Spearman–Kärber method.[5] Empirical models based on nonlinear regression are usually preferred over the use of some transformation of the data that linearizes the dose-response relationship.[6]

Typical experimental design for measuring dose-response relationships are organ bath preparations, ligand binding assays, functional assays, and clinical drug trials.

Specific to response to doses of radiation the Health Physics Society (in the United States) has published a documentary series on the origins of the linear no-threshold (LNT) model though the society has not adopted a policy on LNT."

Hill equation

edit

Logarithmic dose–response curves are generally sigmoidal-shape and monotonic and can be fit to a classical Hill equation. The Hill equation is a logistic function with respect to the logarithm of the dose and is similar to a logit model. A generalized model for multiphasic cases has also been suggested.[7]

The Hill equation is the following formula, where   is the magnitude of the response,   is the drug concentration (or equivalently, stimulus intensity) and   is the drug concentration that produces a 50% maximal response and   is the Hill coefficient.

 [8]

The parameters of the dose response curve reflect measures of potency (such as EC50, IC50, ED50, etc.) and measures of efficacy (such as tissue, cell or population response).

A commonly used dose–response curve is the EC50 curve, the half maximal effective concentration, where the EC50 point is defined as the inflection point of the curve.

Dose response curves are typically fitted to the Hill equation.

The first point along the graph where a response above zero (or above the control response) is reached is usually referred to as a threshold dose. For most beneficial or recreational drugs, the desired effects are found at doses slightly greater than the threshold dose. At higher doses, undesired side effects appear and grow stronger as the dose increases. The more potent a particular substance is, the steeper this curve will be. In quantitative situations, the Y-axis often is designated by percentages, which refer to the percentage of exposed individuals registering a standard response (which may be death, as in LD50). Such a curve is referred to as a quantal dose–response curve, distinguishing it from a graded dose–response curve, where response is continuous (either measured, or by judgment).

The Hill equation can be used to describe dose–response relationships, for example ion channel-open-probability vs. ligand concentration.[9]

Dose is usually in milligrams, micrograms, or grams per kilogram of body-weight for oral exposures or milligrams per cubic meter of ambient air for inhalation exposures. Other dose units include moles per body-weight, moles per animal, and for dermal exposure, moles per square centimeter.

Emax model

edit

The Emax model is a generalization of the Hill equation where an effect can be set for zero dose. Using the same notation as above, we can express the model as:[10]

 

Compare with a rearrangement of Hill:

 

The Emax model is the single most common model for describing dose-response relationship in drug development.[10]

Shape of dose-response curve

edit

The shape of dose-response curve typically depends on the topology of the targeted reaction network. While the shape of the curve is often monotonic, in some cases non-monotonic dose response curves can be seen.[11]

Limitations

edit

The concept of linear dose–response relationship, thresholds, and all-or-nothing responses may not apply to non-linear situations. A threshold model or linear no-threshold model may be more appropriate, depending on the circumstances. A recent critique of these models as they apply to endocrine disruptors argues for a substantial revision of testing and toxicological models at low doses because of observed non-monotonicity, i.e. U-shaped dose/response curves.[12]

Dose–response relationships generally depend on the exposure time and exposure route (e.g., inhalation, dietary intake); quantifying the response after a different exposure time or for a different route leads to a different relationship and possibly different conclusions on the effects of the stressor under consideration. This limitation is caused by the complexity of biological systems and the often unknown biological processes operating between the external exposure and the adverse cellular or tissue response.[citation needed]

Schild analysis

edit

Schild analysis may also provide insights into the effect of drugs.

See also

edit

References

edit
  1. ^ Crump, K. S.; Hoel, D. G.; Langley, C. H.; Peto, R. (1 September 1976). "Fundamental Carcinogenic Processes and Their Implications for Low Dose Risk Assessment". Cancer Research. 36 (9 Part 1): 2973–2979. PMID 975067.
  2. ^ Lockheed Martin (2009). Benchmark Dose Software (BMDS) Version 2.1 User's Manual Version 2.0 (PDF) (Draft ed.). Washington, DC: United States Environmental Protection Agency, Office of Environmental Information.
  3. ^ "Exposure-Response Relationships — Study Design, Data Analysis, and Regulatory Applications" (PDF). Food and Drug Administration. 26 March 2019.
  4. ^ a b c Altshuler, B (1981). "Modeling of dose-response relationships". Environmental Health Perspectives. 42: 23–7. doi:10.1289/ehp.814223. PMC 1568781. PMID 7333256.
  5. ^ Hamilton, MA; Russo, RC; Thurston, RV (1977). "Trimmed Spearman–Karber method for estimating median lethal concentrations in toxicity bioassays". Environmental Science & Technology. 11 (7): 714–9. Bibcode:1977EnST...11..714H. doi:10.1021/es60130a004.
  6. ^ Bates, Douglas M.; Watts, Donald G. (1988). Nonlinear Regression Analysis and its Applications. Wiley. p. 365. ISBN 9780471816430.
  7. ^ Di Veroli, Giovanni Y.; Fornari, Chiara; Goldlust, Ian; Mills, Graham; Koh, Siang Boon; Bramhall, Jo L.; Richards, Frances M.; Jodrell, Duncan I. (1 October 2015). "An automated fitting procedure and software for dose-response curves with multiphasic features". Scientific Reports. 5 (1): 14701. Bibcode:2015NatSR...514701V. doi:10.1038/srep14701. PMC 4589737. PMID 26424192.
  8. ^ Neubig, Richard R.; Spedding, Michael; Kenakin, Terry; Christopoulos, Arthur; International Union of Pharmacology Committee on Receptor Nomenclature and Drug, Classification. (December 2003). "International Union of Pharmacology Committee on Receptor Nomenclature and Drug Classification. XXXVIII. Update on Terms and Symbols in Quantitative Pharmacology". Pharmacological Reviews. 55 (4): 597–606. doi:10.1124/pr.55.4.4. PMID 14657418. S2CID 1729572.
  9. ^ Ding, S; Sachs, F (1999). "Single Channel Properties of P2X2 Purinoceptors". J. Gen. Physiol. 113 (5). The Rockefeller University Press: 695–720. doi:10.1085/jgp.113.5.695. PMC 2222910. PMID 10228183.
  10. ^ a b Macdougall, James (2006). "Analysis of Dose–Response Studies—Emax Model". Dose Finding in Drug Development. Statistics for Biology and Health. pp. 127–145. doi:10.1007/0-387-33706-7_9. ISBN 978-0-387-29074-4.
  11. ^ Roeland van Wijk et al., Non-monotonic dynamics and crosstalk in signaling pathways and their implications for pharmacology. Scientific Reports 5:11376 (2015) doi:10.1038/srep11376
  12. ^ Vandenberg, Laura N.; Colborn, Theo; Hayes, Tyrone B.; Heindel, Jerrold J.; Jacobs, David R.; Lee, Duk-Hee; Shioda, Toshi; Soto, Ana M.; vom Saal, Frederick S.; Welshons, Wade V.; Zoeller, R. Thomas; Myers, John Peterson (2012). "Hormones and Endocrine-Disrupting Chemicals: Low-Dose Effects and Nonmonotonic Dose Responses". Endocrine Reviews. 33 (3): 378–455. doi:10.1210/er.2011-1050. PMC 3365860. PMID 22419778.
edit