Resources
Every firm reviews against more than the drawings: code books, its own drafting and naming standards, a client's standards, review checklists, saved workflows, the spec sections and reference PDFs people keep on their desktops. Resources is where all of that lives. For your team, it's a set of organised folders. Upload a file once, share it with the people who should use it, and pick it up from any project.
Use case: keep your firm's MEP coordination checklist, your client's drafting standard and the code books your jurisdictions use in one place, then pick them from any project when you start a review.
The Resources folders, uploading a checklist and a standard, giving a document a description and where it applies, then picking them in Start custom review.
The folders
Resources is in the sidebar on the left. Your organization's folders sit under your organization's name: everyone in the organization sees them. Files only you can see are not in the sidebar: they are under Documents on My Dashboard.
Every organization starts with these folders:
- Codes - building, fire, energy and other code books your reviews check against. This opens the code library. See Code Review.
- Standards - your firm's and your clients' own rules: drafting, naming and design standards. Drawings get checked against these, and findings cite them.
- Checklists - lists of checks you run on a project's drawings, in the platform, in Revit or in AutoCAD: your own and the ones we provide, such as Universal QAQC. See Checklists & custom checks.
- Workflows - saved review instructions you can run again, on the platform, in Revit or in Civil 3D. See Workflows. Workflows aren't uploaded as files.
- Toolbar tools - your organization's toolbar tools for Revit and AutoCAD: buttons on the Structured Tools tab of people's ribbon, made and published from the desktop chat, then shared like a checklist. See Toolbar tools. Nothing else goes in this folder.
- Shared documents - documents a colleague has shared with you, or with your team or organization, that they haven't put in a folder of their own.
- My Documents - other files you want the agents to read, like specs or reference PDFs. Only you see what's in it. Open it from the Documents tab of My Dashboard; it is not a row in the sidebar.
Folder types
Every folder holds one type of resource: Standards, Checklists, Workflows or Documents (reference files the agents can read). A resource can only be moved into a folder of its own type, so a checklist never ends up in a Standards folder. Codes is its own folder and isn't a type you can choose.
Adding a folder
Press + next to Resources to open Add a resource folder. Give the folder a name (Folder name), choose its Type - Standards, Checklists, Workflows or Documents - and choose Who can see it, then press Add folder:
- Only you - a folder of your own, listed on the Documents tab of My Dashboard. Anyone who can upload files can make one.
- Your organization - a folder everyone in your organization sees. Only people your organization allows to manage folders can make one; for everyone else the choice is shown but can't be picked.
You can rename or delete your own folders. Organization folders are renamed and deleted by the people your organization allows to manage folders. Deleting a folder moves what's in it back to its type's default folder. The default folders can't be deleted, and Codes can't be renamed.

Inside a folder
The top of each folder says who can see it. An organization folder reads "Everyone at your organization can see this folder. What you upload stays yours until you share it. Each row says who can see it." (in Checklists and Workflows, "What you add..."). A folder of your own reads "Only you can see this folder." Press Dismiss to close the note once you've read it; the label next to the folder's name stays.
Every row says who can see that one item: Organization, the names of the teams it's shared with, or Only you. An organization folder can hold items that are only yours: your own checklists and workflows sit next to the organization's until you share them, and nobody else sees them there.
Tabs
Most folders have tabs that narrow them by who an item is shared with: All, Organization, Team and Mine. Three folders split by where things run instead, and keep the who-it's-shared-with filter in the filter column on the left, headed Shared with:
- Checklists: Platform checklist, Revit checklist and AutoCAD checklist.
- Workflows: Platform workflow, Revit workflow and Civil 3D workflow.
- Toolbar tools: Revit tools and AutoCAD tools.
Use Search this folder... to find something by name.
Details: description and where it applies
A document can carry a Description and Where it applies (country, state or province, county or city), so people - and the agents - know when it's relevant. Fill them in when you upload to a Documents folder (both optional), or later from the row's Details button, which also lets you rename it. A workflow's Details has Where it applies only. In a folder whose items have a place, use the location filter to show only what applies where you're working.
People your organization allows to file resources can move one to another folder of the same type with Move to....
Uploading a resource
Press Upload next to Resources in the sidebar, or the upload button at the top of a folder (such as Upload checklist or Upload standard). Upload a resource opens: drop in a file (or click to browse), choose a Folder (or New folder...), and press Upload. The folders are grouped: your organization's first, then Only you. Under the list, the dialog reminds you: "Only you will see this file. Share it from the file's row when you're ready." Workflows and toolbar tools aren't uploaded - they're saved from a chat.
We read every file you upload and tell you what we think it is: "Uploaded. We read it as: a checklist." It can say a code, a checklist, a written standard, or "not sure yet".
Codes and checklists take their own routes:
- A code book or a standard goes through the code library's upload, which asks Who can use it? before it's added. It starts on Only me, so nothing is shared unless you choose to. See Code Review.
- A checklist is read and split into checks you can run. See Checklists & custom checks. Inside a project, the Checklists folder also offers Build a checklist, to write one step by step with the chat instead of uploading a file.
Who can see it
Putting a file in a folder never shares it. Whatever folder you choose, the file is yours alone until you share it from its row in Resources. Everyone in your organization sees your organization's folders, but each person sees only the files in them they're allowed to see. Sharing with the whole organization is approved first, unless you're an organization owner (see Reviews).
When you upload a code or a checklist from inside a project, you also choose Share with:
- This project - only this project uses it.
- Organization - every project in your organization (for a code book, only code library stewards see this choice).
- A team - one team you belong to.

Toolbar tools
The Toolbar tools folder holds the buttons your organization has published to the Structured Tools tab of the Revit and AutoCAD ribbons. Someone builds a tool by describing it to the Revit or AutoCAD chat, then publishes it; it's shared like a checklist, to the organization or a team. Each row shows the ribbon group the button sits in.
Open a tool to see:
- Label in Revit - the button's Name, Tooltip, Group and Icon. Change them with Edit label and Save label: it's the same version, so nobody is asked to confirm again, and people see the new label after Refresh or their next Revit start.
- Versions - every published version with its changes, the one that is out marked Live. Deploy appears on an older version and sends it to everyone the tool is shared with; each person confirms it once in Revit.
- Stop sending - the red button under the versions, while a version is out. The tool leaves the ribbon of everyone it reaches at their next refresh. Its sharing, versions and run log stay, so you can Deploy a version again any time.
- Revit years - the Revit years your team uses, and whether the version that is out works on each, for example "Works on Revit 2026".
- People - who has the tool and which version is in their Revit.
- Runs (last 100) - each run, with All or Failed only.
Use Share... to share it with a team, and Delete tool to remove it. Changing a tool is for the person who made it and organization owners (or whoever your organization's Permissions settings allow); everyone else can ask to share one with a team.

Reviews
Resources shared with the whole organization are approved before everyone can use them. They're approved on the Reviews page: code books first (for organization owners and code library stewards), then Other resources, where everyone - team leads included - sees what's theirs to decide. When something is waiting, a folder shows "1 waiting for your review" with a Review button. You can also reach the page from All resource reviews on Requests.
A resource shared with a team is approved by that team's lead or an organization owner. See How access works.
Using resources from a project
Add a resource
In a project, open Project QAQC and press Add a resource. It opens the same upload, with Share with set to This project. Choose the Checklists folder and press Build a checklist to write a checklist with the chat instead of uploading one.
Start custom review
Project QAQC has two ways to start: Start Structured review runs our recommended checks for the project, and Start custom review lets you choose exactly what to run from your resources. Custom review lists one section per Resources folder, in the same order as the sidebar:
- Checklists - the checklists filed in that folder. You can run a whole checklist, or open Universal QAQC and tick only the checks you want, such as Drawing Cross-Reference Check or Tag & Schedule Coordination.
- Codes - the code books on this project. See Code Review.
- Spec audit - pair a spec with the drawings to audit it against. See Spec Audit.
Press Run (it counts the items you ticked: each checklist, code book or spec audit is one item, however many of its checks you picked, so three checks of Universal QAQC read Run 1 item), or Save as workflow to keep the selection for next time. Findings land in Issues.
Effort level
When what you've ticked includes one of Structured's own checks, the run bar shows an Effort slider, from Less to More:
| Level | Cost |
|---|---|
| Standard (the default) | Our usual cost |
| Extra | About 2-3x the usual cost |
| Limitless | Typically 5-10x the usual cost, more on large sets |
More effort means the checks look harder and longer. It applies to Structured's own checks only; your custom checklists run as written. The same slider is in the Start Structured review confirmation.

The project's Resources group
In the project's file panel, under Files and Overlays, Resources lists the codes, standards and checklists this project's reviews have cited, most cited first, with how many issues cite each one. Click one to open it. A code that isn't in your code library yet is marked Not in the code library.
Turn a project file into a resource
If a file in a project is something the rest of the firm should use, right-click it and choose Turn into a resource:
- Share to the organization's code library - a code library steward reviews it before everyone can use it.
- Add to a team... - the team's lead, or an organization owner, decides.

How resources are used
A resource is used by the reviews you choose to run with it:
- Checklists run as checks in Project QAQC.
- Code books are what Code Review checks the drawings against.
- Workflows run saved review procedures. See Workflows.
- The project chat can find and read the resources you have access to. Ask it about one by name.