From: Sergey Popov <pinkbyte@gentoo.org>
To: gentoo-user-ru@lists.gentoo.org
Subject: Re: [gentoo-user-ru] PCIe card reader на ноутбуке HP ProBook 450s G0
Date: Sat, 01 Mar 2014 15:27:24 +0400 [thread overview]
Message-ID: <5311C41C.3010103@gentoo.org> (raw)
In-Reply-To: <2bf9a8893122f57f276c38faaf10ae9b@rterm.ru>
[-- Attachment #1: Type: text/plain, Size: 5902 bytes --]
28.02.2014 19:36, Никита Киприянов пишет:
> Hi!
>
> Ставлю дженту на эту машину. В машине имеется встроенный кардридер
> SD/MMC, который в lspci по идее видится как Realtek Semiconductor Co.,
> Ltd. RTS5229 PCI Express Card Reader (rev 01)
>
>
> Странность в том, что если грузить машину с вставленной карточкой, то он
> видится. Вынимание и вставление карточки обнаруживается ядром, udisks и
> т. д.. lspci в таком случае выглядит так:
>
> 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM
> Controller (rev 09)
> 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core
> processor Graphics Controller (rev 09)
> 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
> Family USB xHCI Host Controller (rev 04)
> 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series
> Chipset Family MEI Controller #1 (rev 04)
> 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
> Family USB Enhanced Host Controller #2 (rev 04)
> 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset
> Family High Definition Audio Controller (rev 04)
> 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
> Family PCI Express Root Port 1 (rev c4)
> 00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
> Family PCI Express Root Port 3 (rev c4)
> 00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
> Family PCI Express Root Port 4 (rev c4)
> 00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
> Family PCI Express Root Port 6 (rev c4)
> 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
> Family USB Enhanced Host Controller #1 (rev 04)
> 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC
> Controller (rev 04)
> 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
> 6-port SATA Controller [AHCI mode] (rev 04)
> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229
> PCI Express Card Reader (rev 01)
> 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
> 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
>
> Касательно этого устройства в dmesg имеются такие строки:
> [ 1.671078] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
> [ 1.671103] pci 0000:02:00.0: reg 10: [mem 0xd0700000-0xd0700fff]
> [ 1.671272] pci 0000:02:00.0: supports D1 D2
> [ 1.671273] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
> ...
> [ 1.854614] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
> ...
> [ 3.101202] rtsx_pci 0000:02:00.0: irq 46 for MSI/MSI-X
> [ 3.101215] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en
> = 1, pci->irq = 46
>
>
> В то же время, если машину загрузить без карточки в кардридере, строки
> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229
> PCI Express Card Reader (rev 01)
> в lspci не будет, и в dmesg про это устройство тоже ничего не будет.
> Можно сколько угодно тыкать карточки - система их не видит и никаких
> уведомлений нет. Но если со вставленной карточкой теперь сделать echo
> "1" > /sys/bus/pci/rescan - немедленно появляется сообщение "нашёл
> карточку", кардридер проявляется в lspci, а в dmesg появляются такие
> сообщения:
> [ 532.090303] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
> [ 532.090337] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00000fff]
> [ 532.090531] pci 0000:02:00.0: supports D1 D2
> [ 532.090533] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
> [ 532.092283] pci 0000:02:00.0: BAR 0: assigned [mem
> 0xd0700000-0xd0700fff]
> [ 532.092349] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
> [ 532.092464] rtsx_pci 0000:02:00.0: irq 50 for MSI/MSI-X
> [ 532.092483] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en
> = 1, pci->irq = 50
>
> (rtsx_pci - это, очевидно, драйвер кардридера)
>
> С этого момента устройство работает как положено. Если оно уже нашлось,
> рескан без карточки его не отключает и оно никуда не девается.
>
> Вначале думал на PCI hotplug (он был у меня отключен - нет смысла,
> expresscard-слотов в ноутбуке нет, так что хотплажить нечего).
> Пересобрал ядро со всевозможными (как я думаю) хотплагами:
> CONFIG_HOTPLUG_PCI_PCIE=y
> CONFIG_PCI_IOAPIC=y
> CONFIG_HOTPLUG_PCI=y
> CONFIG_HOTPLUG_PCI_ACPI=y
> Не помогло.
>
> Не сталкивался ли кто-то с подобным поведением? Что это происходит и как
> это лечить?
>
>
Все необходимые опции[1] включены? Какая версия ядра?
[1] - https://lists.debian.org/debian-kernel/2013/03/msg00026.html
--
Best regards, Sergey Popov
Gentoo developer
Gentoo Desktop-effects project lead
Gentoo Qt project lead
Gentoo Proxy maintainers project lead
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 555 bytes --]
next prev parent reply other threads:[~2014-03-01 11:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-28 15:36 [gentoo-user-ru] PCIe card reader на ноутбуке HP ProBook 450s G0 Никита Киприянов
2014-03-01 11:27 ` Sergey Popov [this message]
2014-03-02 19:16 ` Никита Киприянов
2014-03-02 20:48 ` [gentoo-user-ru] " Nikita Tropin
2014-03-03 1:22 ` [gentoo-user-ru] " Azamat Hackimov
2014-03-04 18:27 ` Никита Киприянов
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5311C41C.3010103@gentoo.org \
--to=pinkbyte@gentoo.org \
--cc=gentoo-user-ru@lists.gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox