Digi-Mania-Tutorials: Sweet-PinUp

Showing posts with label Sweet-PinUp. Show all posts

I 4 C U

11:06 AM

Program of choice is pspX2

This tutorial was written for those that have a working knowledge of PSP.

-----------------------------------------

- Supplies Needed -

Tube/Image of choice – Lady Mishka - PicsForDesign

You will need a license to use this tube

Scrapkit of Choice

I am using this Beautiful PTU Kit

Letters From Heaven – Kizzed By Kellz

Template of choice - Marilyns Creationz – Temp 3 - Creative Misfits

Font used – Spac3 Halftone & Pixelette (Credits)

-----------------------------------------

- Lets Get Started -

I will assume you are using the

same scrap kit as i am during this tutorial

however this can be done using any other tutorial

with adjustments

Open your template and close of the credits

CTRL+D Close the original template.

Select a section of your template and color to suit

or selections - select all - selections float - selections defloat -

Selections invert - paste a paper of choice - hit delete on your keyboard

I chose paper 4 from the above kit.

Repeat this step for the remaining sections you wish to color/paper

On the outer of the sections there is a white frame

I added noise to this.

I did this by going to adjust - add/remove noise - add noise and loaded

with these settings

Uniform - Monochrome - 26

Copy and Paste your tube as a new layer

place as you wish or as I have, See my tag as a guide.

Select the inner of the frame with your magic wand

click back on your tube layer - Selections - Invert - Hit delete on your keyboard.

I used several elements from this wonderful kit

I used the clouds moved these below the template also the twigs with hanging box

and moved this below the center frame.

I used several little flowers and resized to suit

I added a drop shadow to each layer on my canvas with the following settings.

Effects - 3d effects - drop shadow - 2 - 3- 40 - 5 - Black

Add any other names and copy rite information that is required,

Save as you would normally.

Thats it tutorial complete. Use my finished result as a reference.

This tutorial was written by DigiMania Scraps

Any resemblance to any other tutorial is purely coincidental

All tutorials are registered at Tutorial Writers Inc

This is the result by Luna on Facebook
Luna found my tutorial by my Facebook Tutorial Page.
I would love to see any creations made using my tutorials
Thanks again Luna :)

Labels:CT,Lady Mishka,PFD,Sweet-PinUp

Kiss My Attitude

12:04 PM

Program of choice is pspX2

This tutorial was written for those that have a working knowledge of PSP.

-----------------------------------------

- Supplies Needed -

Tube/Image of choice – Nicholas Garton GartArtPinUp - UpYourArt

You will need a license to use this tube

Scrapkit of Choice

I am using this Beautiful PTU Kit

BubbleGum - Hania Design

Template of choice - Kat & Kristin Collab Temp 3 - Creative Misfit

Font used – Spac3 Halftone & Pixelette (Credits)

-----------------------------------------

- Lets Get Started -

I will assume you are using the

same scrap kit as i am during this tutorial

however this can be done using any other tutorial

with adjustments

Open up the template close of the credits

CTRL+D Close out the original template.

First things first

Select one of the layers on the template

Adjust - Hue & Saturation - Colorize

load the following settings 0 - 0

Do this on all layers of the template to drop the color to grey.

Select the top left white square

selections - select all - float - de float - copy and paste paper of choice

or layers - new raster - fill with color of choice

Repeat this step for the white square on the right.

selections - float - de float

Copy and paste your tube of choice and place as you

would like to once happy with placement

selections - invert - hit delete on your keyboard.

Repeat this step for the opposite square.

Select Black square one Go to

Adjust - Add Remove noise - add noise - random - monochrome - 55

repeat this step for black square 2.

Select the radiating layer - Adjust - hue saturation - colorize -

Color to suit I used color 236 - 231

Select the aqua circle

selections - select all - float - de float - copy and paste a paper

or color of choice selections invert hit delete.

repeat this for the remaining sections that you want to color.

Copy and paste your tube as a new layer and place as you wish

or as I have. See my tag as a guide.

Copy and paste any elements that you may wish to use.

I used several elements from this wonderful kit

and placed them in various places. Add a drop shadow

I used - 2 - 2 - 2 - 3 - black

Add any other names and copy rite information that is required,

Save as you would normally.

Thats it tutorial complete. Use my finished result as a reference.

This tutorial was written by DigiMania Scraps

Any resemblance to any other tutorial is purely coincidental

All tutorials are registered at Tutorial Writers Inc

Labels:CT,Nicholas Garton,Sweet-PinUp,UpYourArt

Beauty

8:16 AM

Program of choice is pspX2

This tutorial was written for those that have a working knowledge of PSP.

-----------------------------------------

- Supplies Needed -

You will need a license to use this tube

Scrap kit of Choice

I am using this Beautiful PTU Kit

Puri - Hania at Sweet-PinUp

Mask of choice - Vix_Mask363 - Vix

Font used – Mathilde & Pixelette (Credits)

-----------------------------------------

- Lets Get Started -

This tutorial was wrote using the above mentioned scrap kit

I assume this tutorial can be done using another kit with adjustments,

I have wrote this tutorial as if you are using the same kit as I have

throughout this tutorial.

This tutorial relies heavily on referring to my finished product

Open a new canvas

600 x 600

flood fill with a colour of choice

I used colour #E593F9

Layers - Load Save Mask - Load Mask from Disk

select the Vix 363 mask and load with the following settings.

Source Luminance - Fit to canvas - Hide all mask - Hit load.

Copy and paste the window frame and place in the center of canvas

resize to a size to suit. I resized by 50%

Layers new raster layer

place this layer under your window frame layer.

select the inner of your window frame with your magic wand

selections - modify - expand by 2

with your paint brush paint in a colour of choice for your sky

I used colour #F7D5FF

Make sure all your inner frame is painted with this colour,

Back to your scrap kit open elements

10, 34, 36, 45, 49, 50, 60, 62, 70 and 85

re size each layer to suit

copy and paste element 60 re size till your happy

duplicate this 3 times and place side by side.

merge these 3 layers together, move this layer below your frame.

see my tag as a guide for placement.

Copy and paste element 62 re size to suit and place to the right of your tag

below your window frame layer and grass layer,

again use my tag as a guide.

Copy and paste Element 10 again re size to suit add the following drop shadow

2 - 2 - 20 - 3- black

move this layer below your grass layer but above your tree layer.

copy and paste element 45 and re size to suit.

place to the right of your tag.

DON'T WORRY ABOUT BITS SHOWING OUTSIDE

YOUR WINDOW FRAME LAYER YET

Copy and paste element 34 again re size to suit

place as you wish or as I have.

Copy and paste element 70

add the same previously used drop shadow

to this layer move this layer below your castle layer.

Copy and paste elements 49 and 50 re size to suit

and place as you wish or as i have.

Close out your window frame layer ( x out on layers palette)

do the same for your bottle elements and mask layer.

all that should be visible now is basically all the elements you placed

inside the window frame and the sky colour. Once this is complete

head back over to your layer palette

Right click on one of your layers and select Merge - Merge Visible.

Un x your remaining layers

and move your merged layer back below your window frame layer

but above your mask layer.

Place your bottle elements and any others that you have used

back in place above your window frame layer.

With your Eraser tool select the merged layer

and delete ALL part that are showing OUTSIDE your frame layer

that you do not want visible.

Add any other names and copy rite information that is required,

Save as you would normally.

That's it tutorial complete. Use my finished result as a reference.

This tutorial was written by DigiMania Scraps

Any resemblance to any other tutorial is purely coincidental

All tutorials are registered at Tutorial Writers Inc

Labels:CT,Sweet-PinUp

Good is overated

9:58 AM

Program of choice is pspX2

This tutorial was written for those that have a working knowledge of PSP.

-----------------------------------------

- Supplies Needed -

Tube/Image of choice – Sweet-PinUp - PicsForDesign

You will need a license to use this tube

Scrapkit of Choice
I am using this Beautiful FTU Kit

Abstract - Creative Misfits
Template - Tonya * Rosey 1 - Creative Misfits

Font used – My First Crush & Pixelette (Credits)
-----------------------------------------

- Lets Get Started -

I will assume you are using the
same scrap kit as i am during this tutorial
however this can be done using any other tutorial
with adjustments

Open your template
exit out the credits - Ctrl+D
Select each section of your template
for example one section of the template
Selections - Select all - Float - Defloat
Copy and paste paper of choice or if
adding colour layers new raster layer and flood fill with your colour.
Selections - Invert - Hit Delete on keyboard.

Repeat this step for the remaining sections of your template
I used papers
Papers 1, 3 and 8
i then added a drop shadow to each of these layers
Load your drop shadow with the following settings0 - 0 - 30 - 6.00 - Black
Add any elements that you may wish
i used elements
16, 21, 22
adding the previously used drop shadow
to each of these.
See my tag as a guide for placements

Add any other names and copy rite information that is required,
Save as you would normally.

Thats it tutorial complete. Use my finished result as a reference.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc

Labels:CT,PFD,Sweet-PinUp

Create For

Facebook

Licences

Creations

I 4 C U

Kiss My Attitude

Beauty

Good is overated

Labels

Who's Here

Blinkie

Resources

T.O.U.