Showing posts with label Robin McQuay Tutorials. Show all posts
Showing posts with label Robin McQuay Tutorials. Show all posts
Race For Life 2011
Program of choice is pspX2
This tutorial was written for those
that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice – Robin McQuay - Upyourart
You will need a license to use this tube
Scrap kit of choice – DigiMania Race For Life 2011
This is a charity scrapkit, all proceeds donated go to Cancer Research UK
Available to purchase at – Exquisite Scraps
Filter - Xero Porcelain
Font used – Pixellete & Moolboran
-----------------------------------------
-Lets Get Started-
Open a blank Canvas
600x200 Transparent
Copy and paste a tube of choice to your canvas
I used Robin McQuays as I found this fitting for the scrapkit used.
I placed this to the left of my canvas and duplicated, Mirror so was one
at either side of my canvas,
Add a paper of choice and place below your tube layers.
I will assume you are using the same kit as I,
However this will work with any paper/colour
Apply Texture – Blinds – Width 2 - Opacity 100
Add your elements of choice.
Add drop shaddow 2 2
To all of these layers,
I used several Different elements from this wonderful kit
so many different elelemnts to play with
You can use the same as i did.
You can also place in the same places i have,
Use my finished result as a referance.
This tutorial was written by DigiMania Scraps
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
Remember to add the same previously used
dropshadow to each of the layers,
Add any other names and copyrite information that is required,
Save as you would normally.
Thats it tutorial complete.
Robin Power
Supplies Needed
Tube/Image of choice – Robin McQuay
Please purchase a license Here
Scrap kit of choice – Missy’s Girl Power – Misfits Scrapz
Template of Choice – Sara Dermer’s Template 2 Here
Open up your templateWith your mover tool, Select your large circleWith your magic wand settings as Tolerance 10 Feather 0Select inside the circle, Copy and paste a paper of choicefrom a kit of choice I am using Paper 12 from Missy’s Girl Power scrapkit.Selections, Invert hit delete on your keyboard.Again with your pick tool select the smaller circle, Magic wand select inside the smaller circle, Again copy and paste another paper of choiceI used paper 8, Selections, Invert, delete on your keyboard.
Again Select the large circle with your pick tool,Select inside the circle with your magic wand,Same settings as before, Copy and paste a tube of choiceSelections, Invert hit delete on your keyboardAdd a drop shadow of choice I am using 3-3-40-5- Black.
Select inside the smaller rectangles again with your magi wandCopy and paste another paper f choice for the smaller rectangles I used paper 4.
With the next lot of rectangles repeat the same steps above.Also repeat this step for the top set of rectangles.Using papers of choice I used papers 4 ad 5.
With your magic wand select the outer of the bottom frames,
Copy and paste a paper of choice, I used paper 10.
Selections, Invert, Hit delete on your keyboard.Again for the inner of the frames, repeat the above steps.Again for the inner frames magic wand – Select inside the inners - Copy and paste tubes of choice – once happy with placementsselections – invert – hit delete on keyboard.
Add any embellishments that you may wishto finish the look of your tag.Add any names and copyright information required.Save as you would normally.Thanks for trying my tutorial.
Follow Your Heart
SUPPLIES NEEDED
Tube/Images of choice, I am using the artwork of - Robin McQuay
You need a license to use this work, Please purchase one at UpYourArt
Flower - This was obtained threw a yahoo group,
If this is yours please let me know so i can credit you.
Wordart - Unknown again If this is yours please contact so i can give credit
Font - Air Conditioner
Supplies - Here
Open a blank canvas
Floodfill with white
Layers New Ratser Layer
Floodfill with a colour from your tube.
Load/Save mask from disc, Find your mask WSL_Mask 33
Load with these settings Source luminance, Fit to canvas, Hide all mask. Hit Load.
Copy and paste your tube as a new layer and centre in your canvas.
With your Preset tool set to eclipse line width solid width 15 Foreground black, Background null.
Draw out an Oval shape to surround your tube.
Once happy with your shape convert to raster layer,
If your tube hangs over slightly grab your eraser tool and erase these parts.
With your magic wand, Settings as tolerance 10 feather 0select inside your frame.
Selections modify expand by 6, Layers, New Raster layer
Floodfill this with the same colour as you ised for your mask layer.
Move this layer below your tube and frame layer
Go to effects, Texture effects, Blinds with these settings
Width 7 Oppacity 25 Colour Black and horizintal checked hit ok.
Add a dropshadow of choice to your tube and frame layer.
Merge Visible your tube, frame and textured layer.
Copy and paste the Flower supplied add ad ropshadow of choice
Also colourise to suit. Move your flower over to the left hand side of your frame.
Move this beow your merged frame layer
Make sure you have a lil flower showingonce happy with the placement of your flower,
Duplicate this layer. Image mirror. Duplicate again Image Flip.
Duplicate again Image mirror.
Copy and paste the flower again adding the same dropshadow
Place along side your frame filling in the spaces.
Remembering each time to duplicate, Image and Mirror.
Once happy with placements of all flowers, X out of white background, and merge visible.
Copy and paste a choice of wordart from the supplies adding the same dropshadow as you used previously.
Add any names required and any copyrite information needed
Save as you would normally.Thats it tut complete.
Thanks for trying my tutorial.
Butterfly Sky
SUPPLIES NEEDED
Tube/Image of choice, I amusing the wonderful artwork of Robin McQuay
You need a license to use her work Please visit UpYourArt
Scrapkit used- Butterfly Sky is a PTU kit you can get this at Chilidesignz
Mask used - Insert2 (76) If this is your please contact meso i can credit you or take down Thanks.
Supplies - Here
Open a blank canvas
550 x 550
floodfill with white
choose a paper from your chosen kit,
Copy and paste as a new layer Layers,
New mask layer, Load a mask of choice with the following settings.
I used mask Insert2 (76) On your layers pallete merge this as a group
I am persuming you are using the same kit as me
Copy and paste the frame from the kit.
Paste as a new layer Copy and paste a flower from the kit place on the top right corner of your frame.
Copy and paste a butterfly from the kit
Resize to a size to suit place on the bottom left of the frame.
Copy and paste another butterfly as a new layer place on the bottom right corner.
With your magic wand settings as tolerance 10 feather set as 0
Select indside the centre of your frame. Selections, Modify expand by 4
Copy and paste a tube/Image of choice
Once happy with placement Hit delete on your keyboard.
Move this layer below your frame layer. Add a dropshadow of choice to each layer
I used 0. 0. 80. 10. Black Copy and paste Any other embelishments that you may wish to use
Add any names and copyrite information required Save as you would normally,
Thats it tut complete Thanks for trying my tutorial
Black & White
Tube of choice I am using the wonderful work of Robin McQuay
You need a license to use this work please go to UpYourArt
Mask Used Becky_Mask023 Thanks hun
Scrapkit Used - Monamagic by Clarey
Font used - Red Shoe Italic
Supplies - Here
Open a blank canvas
550 x 550
Floodfill with white
Copy and paste a paper of choice from the provided kit as a new layer,
Layers, New mask layer, Load/Save mask from disc
Find your mask becky_mask023
Load with the following seetings,Source luminance, Fit to canvas, Hide all mask, Load.
Merge this as a group over on your layer pallete.
Copy and paste my frame as a new layer
colourise to suit if you wish Place in the centre of your canvas
With your magic wand, Select inside the centre of your frame,
Selections, Modify, Expand by 4 Copy and paste a Tube/Image of choice as a new layer
Place this as you would like showing, Once happy with placement,
Selections Invert then hit delete on your keyboard.
Move this layer below your frame,
Add a dropshadow of choice to both your tube layer and frame layer
I used 4.4.40.4 Black Copy and paste a doddle of choice as a new layer
Resize to a size you are happy withh, I placed my doodle on the botto left of my frame,
Duplicate this layer Image Mirror.Again add a dropshadow of chocie
or the same as you previously used.
Copy and paste a bow from the kit as a new layer again resize untill youare happy
with your bow add the same dropshadow and place in the centre of your frame
inbetween your doodles.
Copy and paste the safety as a new layer again resize to a size to suit.
Place on your top left corner of your frame or as you wish
With your eraser tool Just erase a small area in the centre of your pin to make it look like its attatched to the frame.
Add any names you desire and any copyrite information required
Save as you would normally. Thats it tut complete
Thanks for trying my tutorial.
Beauty Inside
Tube of choice
I am using the awesome artwork of Robin McQuay
You need a license to use her work please visit UpYourArt
Paper used - paper 3 of Rubylicious made by Clarey
Mask used - Mask13 unknow owner
If this is yours please contact so i can credit you
Frame used - Made by me,
Please do not use in another tutorial without my permission, Thank-you.
Font used - Pricedown
Supplies - Here
Open a blank canvas
550 x 550
Floodfill with white,
Copy and paste the paper as a new layer
Colourise to suit if you wish. Layers, New mask layer, Load/Save mask from disc
Load with the following settings, Source luminance, Fit to canvas, Hide all mask.
Load On your layers pallete, Merge this as a group
Copy and paste my frame as a new layer, or a frame of choice.
With your magic wand settings as tolerance 10 feather 0
select inside the inner of the frame. Selections Modify, Expand by 4
Copy and paste your tube as a new layer
Palce as you would like visible in the frame.
Selections, Invert, Hit delete on your keyboard.
This will erase the excess tube or image not needed.
Move this tube/image layer below your frame. Add add dropshadow of choice,
I used 0.0.70.10. Black Also add the same dropshadow to the frame layer
Copy and paste any embelishments as a new layers adding the same previously used dropshadow to each layer.
I can not Share my flowers as they came with my tube i purchased from UpYourArtYou
can purchase this tube by clicking on the UpYourArt link above
this tube will only cost $2 and you get bonus layers.
Add any names and copyrite information required Save as you would normally
Thats it Tut complete thanks for trying my tutorial.
Awareness
Supplies Needed
Tueb Of Choice - I am using the wonderful artwork of Robin McQuay
You need a license to use her work please purchase this at UpYourArt
Supplies Here
Ok Lets Begin
Open a blank Canvas
550 X 550
Floodfill with white
copy and paste a paper from the kit as a new layer
Go to layers load/save mask find your mask
I am using beckys_mask23 load with these settings
source luminance, fit to canvas, hide all mask hit load.
on your layers pallete merge this as a group. Copy and paste your frame as a new layer
with your magic wand select inside the frame,selections, modify expand by 4
copy and paste your tube as a new layer once happy with placement, selections,
Invert and hit delete on your keyboard. Add a dropshadow of choice i used 4. 4. 40. 4.00 black
Move this layer below your frame. Add the same dropshadow to your frame layer.
Copy and paste the Pink ribbon as a new layer add the same dropshadow as previously used,
Place on your frame as you wish or as i have see my tag as a guide.
ok here is the tricky part lol. Copy and paste the twisted metal as a new layer
Image, rotate, free rotate 90 degrees right place on the left of the frame or as you wish.
copy and paste the heart and ribbon charm as a new layer place the charm at the bottom of the twisted metal. see my tag as a guide. merge these two layer together.
duplicate this layer so you have a total of three. Copy and paste the silver metal round clip.
Place on top of your now dangling charm layers.
On your 1st duplicated charm layer rename this duplicate 1
Repeat this step for your 2nd duplicated charm layer Back to your original layer,
Image, rotate free, rotate 15.00 left move this layer so it lines up with the top of your 1st duplicated charm layer. on your 2nd duplicated charm layer go to image rotate free rotate 15 degrees right.
Copy and paste my Awareness wordart as a new layer colourise to suit if you wish. Add any names and copyrite information required, X out off duplicate 1 and duplicate 2 charm layers Right click copy merged open animation shop,
Go make your self a cuppa now. lol
Animation Shop
Right click paste as new animationb
ack over to psp X out of your original and duplicate 2 charm layer right click copy merged,
back to animation shop
right click pate after current frame.
back over to psp X out of your duplicated 1 layer and un x duplicate charm layer 2
Right click copy merged,
back over to animation shop
right click paste after current fame. edit select all, animation, frame properties and change the settings to 35.
Save as you would normally, Thats it tut complete
Thanks for trying my tutorial.
Subscribe to:
Posts
(Atom)
Blinkie
