Showing posts with label PFD. Show all posts
Showing posts with label PFD. Show all posts
Ice Princess
** CT Tutorial**
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Desire" - Lysisange
You will need a license to use this tube
You can Purchase this tube at
- Scrap kit used PTU -
"Ice Princess" - Hania Designs
Available to purchase
at
Font used - AL Serenade & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
resize to suit.
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
Copy and paste a paper of choice from the scrap kit.
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
Selections - Invert - Hit delete on your keyboard.
Move this paper layer below your frame layer.
You can also use the above steps just colour if you prefer
not to use scrap kits.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
I added element 01 from the kit
and added a drop shadow to this layer.
and placed in the right window of the frame.
You can select any other elements from the kit
and rotate and place as you wish.
I also placed elements 92 & 94
and placed these in the left window of the frame.
I also placed elements 92 & 94
and placed these in the left window of the frame.
I also used elements
71, 11
element 80
I duplicated and placed these at the
bottom of the book frame
and the top of the book frame
71, 11
element 80
I duplicated and placed these at the
bottom of the book frame
and the top of the book frame
Place as you wish are use my finished tag as a guide
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
"Ice Princess Scrap kit Preview"
Allisia
**CT Tutorial **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
Supplies Needed
Tube/Image of choice –"Allisia" - Lysisange
You will need a license to use this tube
You can Purchase this tube at
Mask - WSLMASK_35 - WeeScottsLass
Font used - AL Serenade & Pixelette (Credits)
-----------------------------------------
-Lets Get Started-
Open a new blank canvas
600x600
Floodfill white.
Paste a paper of choice from the scrap kit
I used floodfilled a new layer
with colour code #C78B8D.
You can also
with colour code #C78B8D.
You can also
flood fill with a colour from your tube.
I chose a paper.
Layers - Load/Save Mask - Load Mask from disk -
Load your mask of choice - or use as I have
Mask - load with the following settings
Source Luminance - Fit to canvas - Hide all mask checked.
Merge Group.
Move to the bottom.
Copy and paste element 44 as a new layer
resize to suit.
Duplicate - Image - Mirror - Flip
Duplicate - Image - Mirror - Flip
With your magic wand
Select inside the frame
Selections - modify - Expand by 5
Copy and paste a paper of choice from the scrap kit.
or another kit, or colour of choice.
I will assume you are using the same kit as I have.
Selections - Invert - Hit delete on your keyboard.
Move this paper layer below your frame layer.
You can also use the above steps just colour if you prefer
not to use scrap kits.
Add a drop shadow to each layer
that you colour/Paste paper to.
I used Drop shadow with the following settings.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Copy and paste your tube as a new layer
place as you wish or as i have,
See my finished Tag as a guide.
remembering to add drop shadow to each layer.
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any elements that you may wish
I added element 67 from the kit
and added a drop shadow to this layer.
and placed to the bottom right of the frame.
You can select any other elements from the kit
and rotate and place as you wish.
I also used elements
7, 9, 55, 56, 57 and 81
7, 9, 55, 56, 57 and 81
Place as you wish are use my finished tag as a guide
Add any other names and copy rite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental
All tutorials are registered at Tutorial Writers Inc.
"Acidia Scrap kit Preview"
Vampire
** CT TUTORIAL **
Vampire
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – DERIA - Lys Isange
You will need a license to use this tube -
Tube availble at -
Tube availble at -
Font used – Broken Ghost & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open Up a paper of choice
I used Paper 6
Paste as a new layer
Layers, new mask layer
Load/Save mask
Load mask from disk
use a mask of choice I used
Mask WSL_Mask35
Use the following settings on
your mask layer
Source Luminance,
Fit to canvas
Hide all mask,
Hit load.
Elements
Open Frame2 Copy and paste as a new layer
You will need to resize this to suit
I Resized by 65%
You will need to resize this to suit
I Resized by 65%
.
With your magic wand
select the inner of the frame,
Selections - Modify - Expand by 5
Open up another paper of choice
I used paper 2
Copy and paste as a new layer,
Move this layer below the frame layer.
Copy and Paste Element 118
Place to the left of your tag or as you wish.
Duplicate this layer - Image - Mirror
Use my finished tag as a guide
adjust size to suit.
Use my finished tag as a guide
adjust size to suit.
place as you wish you may want to
Re size these layer by 50%
or see my tag as a guide for placement.I placed this element to the left of the frame.
Please see my finished tag as a guide.
3 and place to the left side of your tag
resize again to suit, Once happy
Copy and paste elements
11, 27, and 42
11, 27, and 42
and place at the at the bottom of your frame layer
you will need to adjust sizes to suit.
Place as you wish or as I have
you will need to adjust sizes to suit.
Place as you wish or as I have
Use my tag as a guide.
Copy and Paste your tube as a new layer
Place as you wish,
Or as I have.I placed my tube above the frame layer
and deleted the base of the tube that i did not want showing.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Place as you wish,
Or as I have.I placed my tube above the frame layer
and deleted the base of the tube that i did not want showing.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Add a drop shadow of choice to each layer.
I used the following
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
Add any other elements that you may wish to use
to create the tag you want.
See my tag as a guide to place the elements as I have.
Add any other names and copyrite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental.
Scrapkit Preview
Romance In Paris
** CT Tutorial **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – Rosy - Lys Isange
You will need a license to use this tube -
Tube availble at -
Tube availble at -
Font used – Parisienne & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open Up a paper of choice
I used Paper 1
Paste as a new layer
Layers, new mask layer
Load/Save mask
Load mask from disk
use a mask of choice I used
Mask WSL_Mask56
Use the following settings on
your mask layer
Source Luminance,
Fit to canvas
Hide all mask,
Hit load.
Elements
Open Frame 1 Copy and paste as a new layer
You will need to resize this to suit
I Resized by 65%
You will need to resize this to suit
I Resized by 65%
Image - Rotate - Free rotate - 45 Degrees Right
.
.
Open up another paper of choice
I used paper 7
Copy and paste as a new layer,
Move this layer below the frame layer.
Now with your eraser tool erase all the parts of this paper that you do
not wanting showing.
Copy and Paste Element 1
Place to the left of your tag .or as you wish.
Use my finished tag as a guide
adjust size to suit.
Copy and Paste Element 1
Place to the left of your tag .or as you wish.
Use my finished tag as a guide
adjust size to suit.
place as you wish you may want to
Re size these layer by 50%
or see my tag as a guide for placement.I placed this element in the middle of the bottom of the frame
Please see my finished tag as a guide.
4 and place to the right side of your tag
resize again to suit, Once happy
Duplicate this layer - Image, Mirror,
Copy and paste elements
14, 27, 40, 42, 43 and 46
14, 27, 40, 42, 43 and 46
and place at the at the bottom of your frame layer
you will need to adjust sizes to suit.
Place as you wish or as I have
you will need to adjust sizes to suit.
Place as you wish or as I have
Use my tag as a guide.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.I placed my tube above the frame layer
and deleted the base of the tube that i did not want showing.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Place as you wish, Or as I have.I placed my tube above the frame layer
and deleted the base of the tube that i did not want showing.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Add a drop shadow of choice to each layer.
I used the following
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
Add any other elements that you may wish to use
to create the tag you want. I used the following elements and placed around my tag
18, 27, and 83
See my tag as a guide to place the elements as I have.
See my tag as a guide to place the elements as I have.
Add any other names and copyrite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental.
Scrapkit Preview
Rose
** CT Tutorial **
Program of choice is pspX2
This tutorial was written for those that have a working knowledge of PSP.
-----------------------------------------
- Supplies Needed -
Tube/Image of choice – Rose - Lys Isange
You will need a license to use this tube -
Tube availble at -
Tube availble at -
Font used – Angelina & Pixelette (Credits)
-----------------------------------------
- Lets Get Started -
Open a new canvas
600 x 600
Flood fill with white
Open Up a paper of choice
I used Paper 7
Paste as a new layer
Layers, new mask layer
Load/Save mask
Load mask from disk
use a mask of choice I used
Mask WSL_Mask56
Use the following settings on
your mask layer
Source Luminance,
Fit to canvas
Hide all mask,
Hit load.
Elements
Open Element 31 Copy and paste as a new layer
You will need to resize this to suit.
Place in the middle of your canvas.
You will need to resize this to suit.
Place in the middle of your canvas.
Open up another paper of choice
I used paper 7
Copy and paste as a new layer,
Move this layer below the frame layer.
Now with your eraser tool erase all the parts of this paper that you do
not wanting showing.
Copy and Paste Element 19
Place to the left of your tag .or as you wish.
Use my finished tag as a guide
adjust size to suit.
Copy and Paste Element 19
Place to the left of your tag .or as you wish.
Use my finished tag as a guide
adjust size to suit.
place as you wish you may want to
Re size these layer by 50% Place as you wish
or see my tag as a guide for placement.I placed this element on the left side of the frame
I duplicated this later a few times to arrange the grass
around the brick wall.
Please see my finished tag as a guide.
Please see my finished tag as a guide.
36 and place to the right side of your tag
Copy and paste element 77
and place at the at the bottom right of your frame layer
you will need to adjust size to suit.
you will need to adjust size to suit.
copy and paste element 37 and place just above the
brick arch layer that you created
brick arch layer that you created
or place as you wish.
You can always refer to my finished tag
as a guide.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.I placed my tube behind the well layer
and deleted the base of the tube that i did not want showing.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
You can always refer to my finished tag
as a guide.
Copy and Paste your tube as a new layer
Place as you wish, Or as I have.I placed my tube behind the well layer
and deleted the base of the tube that i did not want showing.
Use my tag as a guide.
Delete any of the tube you do not wish to see on your tag.
Add a drop shadow of choice to each layer.
I used the following
I used the following
Effects - 3D Effects - Drop shadow
load the following settings
0 - 0 - 30 - 6.00 - Black.
Add any other elements that you may wish to use
Add any other elements that you may wish to use
to create the tag you want. I used the following elements and placed around my tag
3, 39, 50, 52, and 60
or See my tag as a guide to place the elements as I have.
or See my tag as a guide to place the elements as I have.
Add any other names and copyrite information that is required,
Save as you would normally.
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
That's it tutorial complete.
Use my finished result as a reference.
This tutorial was written by DigiMania
Any resemblance to any other tutorial is purely coincidental.
Scrapkit Preview
Subscribe to:
Posts
(Atom)
Blinkie
